Aube Technologies TH303 Manual de usuario

TH303

Programmable Thermostat

Owner’s Guide

69-2680EF-07

Overview

About your new thermostat .............. 1

Quick reference to controls .............. 2

Quick reference to screen display .... 3

Installation

Removing the faceplate.................... 4

Wiring ............................................... 5

Installing the thermostat ................... 6

Quick start-up / Setting the clock...... 7

Operating modes

Automatic (Auto) mode..................... 8

Manual (Man) mode ......................... 9

Away mode..................................... 10

Countdown mode ............................11

Configuration

Default schedule............................. 12

Modifying the schedule................... 13

Setup menu .................................... 14

Setup procedure ............................. 16

Appendices

In case of difficulty .......................... 17

Specifications ................................. 19

3-year limited warranty ................... 20

Customer assistance...................... 21

Table of contents

TH303

This thermostat has been designed to control an electric heating system such as

a baseboard heater, a radiant ceiling, a convector or a fan-forced heater.

The thermostat CANNOT be used with:

• a resistive load under 0.83 A

• a resistive load over 10.4 A

• a system driven by a contactor or a relay (inductive load)

• a central heating system

SUPPLIED PARTS

• One (1) thermostat

• Two (2) 6-32 mounting screws

• Two (2) solderless connectors

About your new thermostat

Owner’s Guide

•To turn the screen backlight on,

press the Select button once. The

backlight will remain on for 12

seconds.

•To display the setpoint

temperature, press the Up or

Down button once. The setpoint

will be displayed for 5 seconds.

•To modify the setpoint

temperature, press the Up or

Down button until the desired value

is displayed.

•To enter or exit the programming

mode, press the Select button and

hold for 3 seconds.

Quick reference to controls

Up button

Down button

Select button

Help tab

Slide up from the

right and remove

to view information

on both sides.

Screen

TH303

Quick reference to screen display

Ambient temperature

Heating intensity indicator

(No icon appears when

heating is off.)

Time

Periods (see page 12)

Countdown mode (see page 11)

Manual mode (see page 9)

Day

Automatic mode (see page 8)

Away mode (see page 10)

Setpoint temperature

(see page 2)

Flashes during

Countdown mode

Owner’s Guide

TURN OFF POWER OF THE HEATING

SYSTEM AT THE MAIN ELECTRICAL

PANEL TO AVOID ELECTRIC SHOCK.

WARNING: Installation must be carried

out by a certified electrician and must

comply with national and local electrical

codes.

Loosen the screw holding the faceplate to

the base. The screw cannot be

completely removed and remains captive

on the base. Remove the faceplate from

the base by pulling the bottom section.

Removing the faceplate

TH303

Connect either one of the

thermostat wires to the

heater wire and the other

one to the power supply

wire using solderless

connectors for copper wires.

NOTE: Special CO/ALR

solderless connectors must

be used when connecting

with aluminium conductors.

Wiring

2-wire installation 4-wire installation

Power supply

Owner’s Guide

1) Install the base onto an electrical box.

2) Place the FAN switch as follows:

Place at Yes if you have a fan-forced

heater (to prevent premature burnout

of the motor).

Leave at No for better temperature

regulation if you do not have a

fan-forced heater.

3) Reinstall the faceplate on the base and

secure it in place with the screw.

4) Apply power to the thermostat at the

main electrical panel.

Installing the thermostat

Keep air vents at top and

bottom of thermostat clean and

unobstructed at all times.

If you change the FAN switch position after you

have already applied power to the thermostat,

disconnect power to the thermostat at the

electrical panel for 3 seconds. The thermostat

will use the new setting when you reapply power.

FAN switch

TH303

When you power the thermostat, the Time menu flashes on the screen. Set the

thermostat’s clock and date as follows:

NOTE: At any time, you can access the Time menu by pressing the Select button

for 3 seconds and then pressing the Up button once.

Quick Start-up / Setting the clock and date

Time Menu Select the format Set the hour Set the minutes Set the year Set the month Set the date Normal display

Your new thermostat is already preprogrammed

and is now controlling the temperature!

Owner’s Guide

In Automatic mode, the thermostat follows the programmed schedule (see page 12).

To place the thermostat in Automatic (Auto) mode:

Temporary override

While the thermostat is in Automatic mode, you can press the Up or Down button to modify

the temperature. The new temperature will be used until the end of the current period. Auto

will flash during the override. You can cancel the override by pressing the Select button twice

to return to Automatic mode.

Automatic (Auto) mode

Normal display Auto mode

Select Auto

Otros manuales para TH303

Tabla de contenidos

Idiomas:

Otros manuales de Termostato de Aube Technologies

Aube Technologies

Aube Technologies TH104 Guía de inicio rápido

Aube Technologies

Aube Technologies TH114-A-024T Manual de usuario

Aube Technologies

Aube Technologies TH146-P-U Manual de usuario

Aube Technologies

Aube Technologies TH101D Manual de usuario

Aube Technologies

Aube Technologies TH115 A/F/AF Manual de usuario

Aube Technologies

Aube Technologies TH104PLUS Manual de usuario

Aube Technologies

Aube Technologies TH115-A Manual de usuario

Aube Technologies

Aube Technologies TH108 Manual de usuario

Aube Technologies

Aube Technologies TH115 A/F/AF Manual de usuario

Aube Technologies

Aube Technologies TH131 Manual de usuario

Aube Technologies

Aube Technologies TH140-28 Manual de usuario

Aube Technologies

Aube Technologies Pilot-wire Programmer TH134 Manual de usuario

Aube Technologies

Aube Technologies TH147-P Manual de usuario

Aube Technologies

Aube Technologies TH104PLUS Manual de usuario

Aube Technologies

Aube Technologies EConnect Wireless Thermostat Kit TA7210 Manual de usuario

Aube Technologies

Aube Technologies TH135-01 Manual de usuario

Aube Technologies

Aube Technologies TH110A-SP-P Manual de usuario

Aube Technologies

Aube Technologies TH108-A-347S3 Manual de usuario

Aube Technologies

Aube Technologies TH109PLUS Manual de usuario

Aube Technologies

Aube Technologies TH114 Manual de usuario

Aube Technologies

Aube Technologies TH209 Manual de usuario

Aube Technologies

Aube Technologies TH115 A Manual de usuario

Aube Technologies

Aube Technologies TH144 Manual de usuario

Aube Technologies

Aube Technologies TH108PLUS Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Honeywell

Honeywell T6811 Manual de usuario