AtVideo CB236HD Manual de usuario
INSTRUCTION MANUAL
2MP
HD ANALOG CAMERA
CB236HD, CT236HD, CB2212HD
CT2212HD, CV2212HD
Please read this manual thoroughly before use and keep it handy for future reference.
2
3
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO
NOT INSERT ANY METALLIC OBJECTS THROUGH THE
VENTILATION GRILLS OR OTHER OPENINGS ON THE
EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
4
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC INFORMATION: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.
CE COMPLIANCE STATEMENT
WARNING
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
5
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
ARE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.
6
Table of Contents
1 Introduction.....................................................................................................................7
1.1 Features ............................................................................................................................. 7
2 Installation and Configuration.......................................................................................8
2.1 Package Contents.............................................................................................................. 8
2.2 Installing the Camera.........................................................................................................8
2.3 Connections.....................................................................................................................13
3 OSD Menu....................................................................................................................14
3.1 OSD Menu Structure........................................................................................................ 14
3.2 Lens.................................................................................................................................. 15
3.3 Exposure..........................................................................................................................15
3.4 Backlight ..........................................................................................................................16
3.5 White Balance..................................................................................................................16
3.6 Day & Night ...................................................................................................................... 17
3.7 NR.....................................................................................................................................17
3.8 Special.............................................................................................................................. 18
3.9 Adjust ...............................................................................................................................20
3.10 Exit.................................................................................................................................. 20
4 Appendix .....................................................................................................................21
4.1 Specification.................................................................................................................... 21
1 Introduction
1.1 Features
•1/2.9” SONY Exmor CMOS image sensor
•3.6mm fixed or 2.8-12mm varifocal lens
•True D/N (Auto, Day, Night)
•IR LEDs
•AHD, HD-TVI, HD-CVI, CVBS selectable
•Auto exposure control (1/50,000 ~ x30 second)
•White balance control (AWB, ATW, AWC, Indoor, Outdoor, Manual)
•BLC (Back Light Compensation)
•HSBLC (High Suppress Back Light Compensation)
•Digital WDR (Wide Dynamic Range)
•DNR (Digital Nosie Reduction)
•4 Motion detection areas
•4 Privacy areas
•Defect Detections (Live DPC, White DPC, Black DPC)
•Defog
•12VDC for Camera
•Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only.
8
2 Installation and Configuration
2.1 Package Contents
The package contains the following.
•Camera 1
•Instruction Manual (This Document) 1
•Template Sheet 1
•Accessory Kit 1
2.2 Installing the Camera
Carefully remove the contents from the box.
CB236HD - Fixed Bullet Camera
To mount the bullet camera, fix the base of the camera with the three screws provided in the
accessory kit.
Plastic Anchor
Mounting Screw
CB2212HD - VF Bullet Camera
1) To mounting the bullet camera, fix the base of the
camera with the three screws provided in the
accessory kit.
2) Adjust the camera angle and tighten the
mount using the L-wrench.
3) Open the lens cover and adjust zoom & focus.
4) Adjust sun-shield position.
Plastic Anchor
Mounting
Screw
L-wrench
10
CT236HD - Fixed Turret Camera
1) Paste the template sheet in place at the
proper position.
2) Remove the collar off the camera
by rotating it down.
3) Fix the base of the camera with the three
screws provided in the accessory kit.
4) Mount the collar back by rotating it
up.
Template
sheet
Plastic Anchor
Mounting
Screw
Collar
Collar
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Cámara de seguridad de AtVideo
