Atlas Copco STpad Manual de usuario
STpad
Printed Matter No.9839 0882 01 Data collector
Publication Date 2018-03-12
Issue No. 01 Operation Manual
STpad 8059095700
WARNING
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
STpad EN Introduction
© Atlas Copco Industrial Technique AB - 9839 0882 01 3
Introduction
General Information
The STpad is a rugged device equipped with 802.11, Bluetooth and GNSS for wireless data communica-
tions. The STpad is a rugged 10.1” tablet computer capable of 1920 x 1200 resolution. The STpad sup-
ports the following operating systems:
■Windows® Embedded 8.1 Industry 64bits
■Windows® Embedded Standard 7 64bits
■Windows® 7 Professional 64bits
■Windows® Embedded Standard 8 64bits
About Operation Manual
The Operation Manual contains information the customer needs on a day to day basis. This document is
not intended to replace the training and expertise of the end-user.
Before beginning the installation or configuration process make sure to inspect all components and acces-
sories. Contact Atlas Copco Customer Center if there are any missing or damaged items.
Operation overview EN STpad
4© Atlas Copco Industrial Technique AB - 9839 0882 01
Operation overview
Overview
No. Item Description
1 Left view For more information, see “Side
View”.
2 Front view For more information, see “Front
View”.
3 Rear view For more information, see “Rear
View”.
4 Right view For more information, see “Side
View”.
5 Rubber bumpers Easy to grip rubber bumpers enable
the rugged tablet to withstand
shocks and drop for use in de-
manding environments.
6 Bottom view For more information, see “Bottom
View”.
See also
2Side view [6]
2Front view [5]
2Rear view [7]
2Bottom view [6]
STpad EN Operation overview
© Atlas Copco Industrial Technique AB - 9839 0882 01 5
Front view
No. Item Description
1 Front camera 2.0 Mega-Pixels camera.
2 Touch screen 5-point capacitive touch.
3 Barcode trigger If barcode scanner is installed,
press to scan.
4 Battery LED Display battery status. For more in-
formation, see “LED Status”.
5 Wi-Fi LED The Wi-Fi LED lights to indicate Wi-
Fi is enabled.
6 FN LED The FN LED lights when the func-
tion switch on.
7 Home key Windows® 8 home key.
8 Volume + Volume increase.
9 Volume - Volume decrease.
10 Power key Power key powers the STpad on or
off.
11 Power LED The power LED lights when the de-
vice is on.
12 F2 key Programmable function key.
13 F1 key Programmable function key.
14 FN key Programmable function key.
See also
2LED status [5]
LED status
Item Status Description
Power Green: On Power on
Off Power off
Battery Green: On Fully charged
Amber: On Charging
Amber: Blinking Low power < 15%
Off Not charging / no battery
FN Blue: On FN function switch on
Blue: Off FN function switch off
Operation overview EN STpad
6© Atlas Copco Industrial Technique AB - 9839 0882 01
Item Status Description
Wi-Fi Blue: On Wi-Fi on
Blue: Off Wi-Fi off
Bottom view
No. Item Description
1 Docking connector 12 pin connector for docking onto a
station.
2 Kensington lock Lock the STpad to a stationary ob-
ject for security.
3 Pass-through Dual pass-through for WLAN,
GNSS and WWAN.
Side view
Side view: left view
Side view: right view
STpad EN Operation overview
© Atlas Copco Industrial Technique AB - 9839 0882 01 7
No. Item Description
1 Micro HDMI Connect HDMI devices to the
PX-501B.
2 MicroSD slot Insert microSD card in to the slot.
3 Left I/O compartment cover Open to access the left I/O ports.
4 Tether hole Digitizer can be tethered to it.
5 Battery switch Switch to ON to provide power from
the backup battery.
6 Micro SIM slot Insert micro SIM card for 3G or 4G
LTE communication function.
7 USB 3.0 Connect USB devices to the
PX-501B.
8 Audio jack Connect a 3.5 mm jack for a head-
phone or external speakers.
9 Ethernet Connect the STpad to an Ethernet
(RJ-45) cable.
10 DC-IN jack Insert power connector to charge
battery.
11 RS-232 Connect the STpad to a serial de-
vice.
12 DC-IN cover Open to access the DC-IN jack.
13 Right I/O compartment cover Open to access the right I/O port.
Rear view
No. Item Description
1 Battery To install a battery, an external bat-
tery is optional.
2 Rear camera 5.0 Mega-Pixels camera with LED
auxiliary light.
3 Barcode reader For installing a barcode reader.
(Optional)
4 Fan Embedded fan for cooling.
5 Securing holes Secure the bumpers and the D-
rings for the handstrap and shoul-
der strap.
Operation overview EN STpad
8© Atlas Copco Industrial Technique AB - 9839 0882 01
No. Item Description
6 Expansion bay Remove the cover to find the ex-
pansion accessory connector.
7 Digitizer holder Place digitizer here.
Identifying the Digitizer
You can use the digitizer to control your STpad as with a mouse or keyboard.
The digitizer is not waterproof. Take care not to soak it or dip it in water.
1 Tip 2 Click button
Dimensions
The following image lists the device dimensions without add-ons (mm/inches).
Front view dimensions
Side view dimensions
Touch screen features
Always use the point of the digitizer for clicking or making strokes on the touch screen. Never use an
actual pen, pencil, or sharp/abrasive object on the touch screen.
STpad EN Operation overview
© Atlas Copco Industrial Technique AB - 9839 0882 01 9
The digitizer is used as if it were a pen or pencil. Touch the screen with the tip of the digitizer then remove
the digitizer from the screen.
After each use, replace the digitizer in the digitizer holder for proper care and to preserve the life of the
digitizer. Using a digitizer is similar to moving the mouse pointer then left-clicking icons on a desktop com-
puter screen.
The following actions are available through the use of the digitizer:
■Open applications
■Choose commands in menu
■Select options in dialog box or drop-down menu
■Drag the scroll bar
■Drag across the text to select content
■Place the cursor in a text box before typing
A digitizer replacement kit is available.
To prevent damage or malfunction, always dry the touch screen when wet.
Making right/left click
1. In the system tray, tap the mouse icon to make a right click.
2. After tapping, the mouse icon highlights the right button of the icon in red. The next touch screen tap
is treated as a right click.
3. The mouse icon returns to the left button highlighted in red so subsequent taps are treated as left
clicks.
Getting started EN STpad
10 © Atlas Copco Industrial Technique AB - 9839 0882 01
Getting started
Introduction
This section provides an outline of the steps necessary to setup a new STpad. A detailed guide follows the
listed items, see as follows.
For additional technical assistance, contact your local Atlas Copco Customer Center.
It is recommended to install or remove accessories on a clean, well-lit work surface. To protect your-
self and the device from electrostatic discharge, wear anti-static wrist straps or place the device on
an anti-static mat.
Using for the first time
1. Open the left I/O compartment cover (for more information, see “Opening I/O compartment cover” ).
2. Switch the battery switch to the ON position.
3. Close the left I/O compartment cover (see the paragraph “Closing I/O compartment cover” for more
information).
See also
2Opening I/O compartment cover [16]
Charging the battery
After connecting the STpad to a power outlet through a standard AC adapter, the standard and external
(optional) battery recharge automatically.
During the charging process, the power LED is on.
When the battery is fully charged, the power LED is lit with a solid green.
1. Flip open the DC-IN cover to expose the DC-IN jack.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
