Atlas Copco Power MACS Hoja de instrucciones

Power MACS

Printed Matter No. 9839 0183 00 Control and drive unit

Valid from Serial No. A0000001

2015-04-01 Product Instructions

For Power MACS

WARNING

Read all safety warnings and instructions

Failure to follow the safety warnings and in-

structions may result in electric shock, fire and/

or serious injury.

Save all warnings and instructions for future

reference

2© Atlas Copco Industrial Technique AB - 9839018300

Table of Contents

EN Product Instructions.......................................................................... 3

Power MACS EN Product information

Product information

Overview

The E-stop module is used to extend the PM4000 emergency stop to include ex-

ternal equipment. It allows for example lifting cylinders that are controlled by

the PM4000, and connected to an external 24V supply, to be emergency

stopped together with the PM4000.

The E-stop module is designed to be a part of a PM4000 TC, located in the

backplate. It uses the same space as for the Ethernet Switch, so an E-stop card

and an Ethernet Switch cannot be equipped in one TC. If an Ethernet switch is

also needed, use an external Ethernet switch.

The E-stop module is an emergency stop solution with redundant breaking ac-

cording to EN ISO 13849-1 category 3 PL d.

The Atlas Copco Standard E-stop Cable 4222 1247 XX is used for connecting

between the TC and the E-Stop module.

With the E-stop module it is possible to have two redundant stop inputs. At

least one of the stop inputs must be connected to enable the emergency stop

functionality.

Installation

Connectors

E-stop In

Type: Phoenix Mini-Combicon MC1.5/12-ST.3,5 12 poles

Use: Input of E-stop from the PM4000 E-stop chain

Pin Function Comment

1 EM-STOP1- Relay 1 coil (-), connected to EM-

STOP pin 9

2 EM-STOP2- Relay 2 coil (-)

3 N/C

4 N/C

5 EM-STOP1+ Relay 1 coil (-), connected to EM-

STOP pin 11

6 EM-STOP2+ Relay 2 coil (+)

7 N/C

8 N/C

9 EM-STOP1-

10 EM_RESET

11 EM_STOP1+

12 EM_NC2

E-stop Out

Type: Phoenix Mini-Combicon MC1.5/6-ST.3,5 6 poles

Use: Connection of external 24V

Product information EN Power MACS

4© Atlas Copco Industrial Technique AB - 9839 018300 00

Pin Function Comment

1 E-stop Circuit 1 In

2 E-stop Circuit 1 Out

3 E-stop Circuit 2 In

4 E-stop Circuit 2 Ou

5 E-stop Circuit 3 In

6 E-stop Circuit 3 Out

7 NC In Only for non-safety functionality

8 NC Out Only for non-safety functionality

9 NO In Only for non-safety functionality

10 NO Out Only for non-safety functionality

E-stop Circuit 1 to 3 can be used for safety applications. NC and NO connectors

are only for indication etc.

For connection examples, see System Design & Installation Guide Power-

MACS 4000.

Power MACS EN Product information

Emergency stop

module

4222 0982 92

Original Product Information

Atlas Copco Industrial

Technique AB

SE-10523 STOCKHOLM

Sweden

Telephone: +46 8 743 95 00

Telefax: +46 8 644 90 45

www.atlascopco.com

unauthorized use or copying of the contents or part thereof is prohibited. This

applies in particular to trademarks, model denominations, part numbers and

drawings. Use only authorized parts. Any damage or malfunction caused by the

use of unauthorized parts is not covered by Warranty or Product Liability.

Out of respect to wildlife and nature, our technical literature is printed on

environmentally friendly paper.

Otros manuales de Unidad de control de Atlas Copco

Atlas Copco

Atlas Copco Power Focus 6000 LV Manual de usuario

Atlas Copco

Atlas Copco Power Focus 3000 Manual de usuario

Atlas Copco

Atlas Copco POWER FOCUS 6000 Hoja de instrucciones

Atlas Copco

Atlas Copco Power Focus 600 Hoja de instrucciones

Atlas Copco

Atlas Copco MT Focus 400 Hoja de instrucciones

Atlas Copco

Atlas Copco G 4 Hoja de instrucciones

Atlas Copco

Atlas Copco MT Focus 400 Hoja de instrucciones

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario