ATEQ F600 Manual de usuario

ATEQ F600

Quick Start Guide

QSG_F600.415.00_EN_01 / 2019-04-16

2/02

Table of contents

Safety advisory / Warranty

Good practices and safety instructions 4

Air quality requirements 5

Preamble

ATEQ F600, a universal leak tester 6

Leak test 6

Principle of a cycle 7

Your ATEQ F600

Front panel 8

Connectors on the back panel (with all options) 9

Power supply connectors 11

Digital links 13

Analog outputs (option) 16

Digital inputs/outputs 16

Pneumatic connectors 20

Pneumatics configuration 23

User interface

Overview 25

Keys 25

Display 26

Starting up

Power up 28

Preparing a program 28

Modifying a parameter 29

Selecting a program 30

Starting and stopping current cycle 30

User adjustments

Options of the menus 31

Specifications

Characteristics 37

QSG_F600.415.00_EN_01 / 2019-04-16

3/38

ATEQ Manufacturer Plants - Measurement Solution, Global Leader.

ATEQ

15, rue des Dames, Z.I.

78340 LES CLAYES-SOUS-BOIS

FRANCE

[email protected]

ateq.com

T.: +33 1 30 80 1020

F.: +33 1 30 54 1100

ATEQ K.K.

3 – 41 ATEQ Building, Ikehata

Chiryu-city, Aichi-pref

JAPAN

[email protected]

ateq.co.jp

T.: +81 566-84-4670

F.: +81 566-84-4680

ATEQ China

98 Jian Peng Lu

Shanghai

CHINA

[email protected]

ateq.com.cn

T.: +86 21 6763 9508

F.: +86 21 6763 9528

ATEQ SYSTEMS ANALYSIS

TAIWAN CO., LTD.

NO. 3, LAN 223, San Jia Dong

Street

40642, TAICHUNG

TAIWAN

[email protected]

ateq.com.tw

T.: +886 4 2437 5278

F.: +886 4 2437 3675

ATEQ CORP.

35980 Industrial Road Suite L

Livonia MI 48150

UNITED STATES

[email protected]

atequsa.com

T.: +1 734-838-3100

F.: +1 734-838-0644

We continuously work on improving our products. This is why information contained in this

manual, the device and the technical specifications may be modified without prior notification.

Pictures and figures in this manual are non-contractual.

QSG_F600.415.00_EN_01 / 2019-04-16

4/38

Safety advisory / Warranty

GOOD PRACTICES AND SAFETY INSTRUCTIONS

Safety recommendations

If the device is supplied with 100/240VAC, it is mandatory to connect it to the ground with

a good link to the ground, to protect against electric hazard or electrocution.

It is dangerous to change the status of the outputs.

They can control power actuators or other equipment (mechanical, pneumatic, hydraulic,

electrical or other) which can cause serious personal injury and damage to surrounding material.

For safety and quality measurement reasons, it is important, before powering on the device,

to ensure that it is air supplied with a minimum operating pressure (0.6MPa (87PSI) ± 15%).

Recommendations for the test environment

Keep the test area as clean as possible.

Recommendations for operators

ATEQ recommends that the operators who use the devices have training and a level of

qualification that correspond to the job to perform.

General recommendations

— Read the user manual before using the device.

— All electrical connections to the device must be equipped with safety systems (fuses,

circuit breakers, etc.) adapted to the needs and in accordance with the applicable

standards and rules.

— To avoid electromagnetic interference, electrical connections to the device must be

shorter than 2 meters.

— Power supply plug must be grounded.

— Disconnect the device from the mains before performing any maintenance work.

— Shut off the compressed air supply when working on the pneumatic assembly.

— Do not open a connected device.

— Avoid splashing water on the device.

ATEQ is at your disposal for any information concerning the use of the device under

maximum safety conditions.

We draw your attention to the fact that ATEQ cannot be held responsible for any

accident related to a misuse of the measuring instrument, the workstation or non-

compliance of the installation with safety rules.

In addition, ATEQ declines any responsibility for the calibration or the fitting of their

instruments that is not done by ATEQ.

ATEQ also declines any responsibility for any modification (program, mechanical or

electrical) of the device done without their written consent.

QSG_F600.415.00_EN_01 / 2019-04-16

5 / 38

AIR QUALITY REQUIREMENTS

The air supplied into the device must be clean and dry. Even though the device is provided

with a filter, the presence of dust, oil or impurities may cause malfunction.

Air quality requirements according to ISO standard 8573

The air must be clean and dry.

The presence of impurities, oil or humidity in the air may cause deterioration which will not

be covered by the warranty.

When the instrument is working in vacuum conditions, impurities must be prevented from

being drawn into its internal components.

For this purpose we strongly recommend that a suitable airtight filter is installed between

the part under test and the instrument.

ATEQ recommends the following characteristics for the air supplied into the device.

Air characteristics ISO standard 8573 class

Grain size and concentration 0.1 μm and 0.1 mg/m3 Class 1

Dew point under pressure - 40°C dew Class 2

Maximum concentration of oil 0.01 mg/m3 Class 1

Recommended additional equipment

ATEQ recommends the installation of this additional equipment:

— Air dryer to provide dry air at less than -40°C dew point

— 25 micron and 1/100 micron double filter.

QSG_F600.415.00_EN_01 / 2019-04-16

6/38

Preamble

ATEQ F600, A UNIVERSAL LEAK TESTER

ATEQ F600 is a leak detector that tests the airtightness of parts.

ATEQ F600 can memorise128different test programs.

LEAK TEST

Leak test (Desensitized)

The test pressure is applied to the input

of the test part3.

The measurement is performed by the

pressure sensor2.

1Device

2Pressure sensor

3Part under test

QSG_F600.415.00_EN_01 / 2019-04-16

7 / 38

PRINCIPLE OF A CYCLE

The measurement cycle is made of 4 main phases: fill, stabilization, test, dumping.

Pressure

(0) (1) (2) (4)

Time

Cycle start

Cycle end

(3)

0Waiting phase

1Fill phase

2Stabilization phase

3Test

4Dumping

QSG_F600.415.00_EN_01 / 2019-04-16

8/38

Your ATEQ F600

FRONT PANEL

The user interface is located on the front panel.

1Display

2Cycle keys

3Navigation keys

4USB connectors

5Quick connector

6Mechanical Regulator

For more information, refer to User interface

QSG_F600.415.00_EN_01 / 2019-04-16

9/38

CONNECTORS ON THE BACK PANEL (WITH ALL OPTIONS)

QSG_F600.415.00_EN_01 / 2019-04-16

10/38

Ref Name Description

1J1 Analog outputs - pressure and leak (option)

2J5 Fieldbus connector (option)

3J10 Program selection extension connector (option)

4J12 Printer RS232 connector / Modbus (option) or Profibus (option)

5-Exhaust output

6-Input connector to the air filter (regulator air supply)

7-Pilot pressure input

8BPneumatic output for B automatic connector option

9APneumatic output for A automatic connector option

10 -Vacuum input (according configuration)

11 -Part number / Serial number

12 -Air supply energy information

13 TTest part connector

14 -Ground

15 J11 Relay board connector (digital inputs/outputsand24VDC-2A

power supply)

16 J9 Outputs code board connector (digital inputs/outputs)

17 J7 Connector for 24VDC-2A or 100/240VAC power supply

(according option provided)

18 J6 Fieldbus connector (option)

Otros manuales para F600

Tabla de contenidos

Otros manuales de Equipo de prueba de ATEQ

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario