ATEN VS0801H Manual de usuario
VS0801H
USER MANUAL
8-Port HDMI Switch
EMC Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual, may
cause interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from
that which the receiver is connected;
Consult the dealer or an experienced radio/television technician
for help.
FCC Caution: Any changes or modifications not expressly approved
bythepartyresponsibleforcompliancecouldvoidtheuser'sauthority
to operate this equipment.
RoHS
This product is RoHS compliant.
KCC Statement: 유선 제품용 /A급 기기 (업무용 방송 통신 기기 )이
기기는 업무용 (A 급)전자파적합기기로서 판매자 또는 사용자는 이
점을 주의하시기 바라며 ,가정 외의 지역에서 사용하는 것을 목적으
로 합니다 .
- 3 -
SJ/T 11364-2006
The following contains information that relates to China.
- 4 -
VS0801H User Manual
Online Registration
Telephone Support
Technical Support
For international online technical support – including
troubleshooting, documentation, and software updates:
http://support.aten.com
For North American technical support:
International http://support.aten.com
International 886-2-8692-6959
China 86-10-5255-0110
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
United Kingdom 44-8448-158923
Online
Technical
Support
Troubleshooting
Documentation
Software Updates
http://support.aten.com
Telephone Support 1-888-999-ATEN ext 4998
Copyright © 2015 ATEN® International Co., Ltd.
Firmware version: V2.0.197
Date Published: 2015-05-15
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
- 5 -
Package Contents
The VS0801H 8-port HDMI Switch package contains the
following items:
1 VS0801H 8-port HDMI Switch
1 IR Remote Control Unit
1 Power Adapter
1 Mounting Kit
1 User Instructions*
Check to make sure that all the components are present and that
nothing got damaged in shipping. If you encounter a problem,
contact your dealer.
Read this manual thoroughly and follow the installation and
operation procedures carefully to preventanydamagetothe unit,
and/or any of the devices connected to it.
*Features may have been added to the VS0801H since this
manual was published. Please visit our website to download
the most up-to-date version of the manual.
- 6 -
Overview
With more and more HDMI devices entering the Home Theater
market, the need for simultaneous access to different HDMI A/V
sources is becoming increasingly important. Now, the VS0801H
8-port HDMI Switch offers an easy and affordable way to add
HDMIcapabilitiesto your hometheater systembyallowing youto
switch easily between up to eight HDMI A/V sources that are
connected to your HDMI display.
With eight HDMI A/V input ports, the VS0801H 8-port HDMI
Switch allows you to connect eight HDMI devices (such as an HD
camcorder or satellite box, HD-DVD player, hi-def Blu-ray player,
home theater PC, stand-alone streaming media player, gaming
console, etc.) to your HDMI monitor, display, projector or TV at
the same time. The remote control and convenient front panel
pushbuttons allow you to quickly and easily toggle between
HDMI sources, while the front panel LEDs indicate the source
device at a glance.
Furthermore,forcompletesystem andinstallintegration, RS-232
control is standard through the VS0801H’s built-in bi-directional
RS-232 serial port that allows the switch to be controlled through
a high-end controller, PC, and/or home automation / home
theater software package.
- 7 -
Features
Allows up to eight HDMI sources to be connected to one
HDMI display
Quick and easy switching between HDMI sources via front
panel pushbuttons or IR remote control
Built-in bi-directional RS-232 serial port for high-end system
control*
Supports Dolby True HD and DTS HD Master Audio
Up to 60 Hz refresh rate
Long-distance transmission – up to 20 m (24 AWG) and 15 m
(28 AWG)
Superior video quality – HDTV resolutions of 480p, 720p,
1080i, 1080p (1920x1080); VGA, SVGA, SXGA, UXGA, and
WUXGA (1920x1200)
HDMI (3D, Deep Color)
Plug-and-play – no software installation required
DDC compatible
HDMI and HDCP 1.1 compatible
Consumer Electronics Control (CEC) allows interconnected
HDMI devices to communicate and respond to one remote
control
Signaling rates up to 2.25 Gbits in support of 1080p display
All-metal casing
Easy and affordable way to add eight HDMI inputs to your
home theater system
Note: The VS0801H AP and GUI operational instructions can be
downloaded from the ATEN website (www.aten.com).
- 8 -
System Requirements
Source Devices(s)
HDMI Type A output connector(s)
Note: A DVI/HDMI adapter is required when connecting a DVI
source device.
Display Device
A display device or receiver with an HDMI Type A input
connector
Cables
1 HDMI cable for each source device you will be connecting
1 HDMI cable for your display device
Note: 1. No HDMI cables are included in this package. We
strongly recommend that you purchase high-quality
cables of appropriate length since this will affect the
quality of the audio and video display. Contact your
dealer to purchase the correct cable sets.
2. If you wish to utilize the VS0801H’s high-end serial
controller function, you will also need to purchase an
appropriate RS-232 cable. See Installing the RS-232
Controller, page 12.
- 9 -
Components
VS0801H Front View
No. Component Function
1 Port Selection
Pushbuttons Pressing a port selection pushbutton
routes the HDMI source from the
corresponding input port to the output port
for display.
2 Port LEDs There is one port selected LED next to
each port selection pushbutton. This lights
green to indicate that the corresponding
port has been selected.
Note: When you use the IR remote control
or serial commands to switch off the HDMI
output port, the LEDs for port 3 and 6 will
flash.
3 IR Receiver This receives signals from the IR remote
control.
2
1
3
- 10 -
VS0801H Rear View
No. Component Function
1 HDMI In The cables from the HDMI source devices
plug into any of the eight available ports.
2 Power Jack The power adapter cable plugs in here.
3 HDMI Out The cable from the HDMI display device
plugs in here.
4 RS-232 Serial
Port This is the serial remote port for input
source selection and high-end system
control.
1
42 3
Otros manuales para VS0801H
3
Tabla de contenidos
Otros manuales de Cambiar de ATEN
ATEN
ATEN KVMP CS1822 Manual de usuario
ATEN
ATEN MASTER VIEW CS-142 Manual de usuario
ATEN
ATEN Altusen KN4116VA Manual de usuario
ATEN
ATEN CS533 Tap Manual de usuario
ATEN
ATEN Altusen KM0932 Manual de usuario
ATEN
ATEN CN8000A Manual de usuario
ATEN
ATEN Bi-Tronics AF-142 Manual de usuario
ATEN
ATEN CL3108 Manual de usuario
ATEN
ATEN Video DinaSyns Manual de usuario
ATEN
ATEN CubiQ CM0264 Manual de usuario
ATEN
ATEN CS-64U Manual de usuario
ATEN
ATEN US221A Manual de usuario
ATEN
ATEN CM1164A Manual de usuario
ATEN
ATEN KL1108V Manual de usuario
ATEN
ATEN CS-1262 Manual de usuario
ATEN
ATEN VanCryst VM3200 Manual de usuario
ATEN
ATEN Altusen KM0032 Manual de usuario
ATEN
ATEN MasterView CS-1732A Manual de usuario
ATEN
ATEN UC2322 Manual de usuario
ATEN
ATEN CL5808 Manual de usuario
