ATEN VM0202H Manual de usuario

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device mat not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate

this equipment.

Warning: Operation of this equipment in a residential environment could

cause radio interference.

Warning: This equipment is compliant with Class A of CISPR 32. In a

residential environment this equipment may cause radio interference.

KCC Statement

유선 제품용 / A 급기기 ( 업무용 방송 통신 기기 )

이기기는 업무용 (A 급) 전자파적합기기로서 판매자 또는 사용자는 이점을 주

의하시기 바라며 , 가정 외의 지역에서 사용하는 것을 목적으로 합니다 .

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

- 3 -

VM0202H User Manual

Online Registration

Telephone Support

Technical Support

For international online technical support – including troubleshooting,

documentation, and software updates:

http://eservice.aten.com

For North American technical support:

International http://eservice.aten.com

International 886-2-8692-6959

China 86-400-810-0-810

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8448-158923

Email Support [email protected]

Online

Technical

Support

Troubleshooting

Documentation

Software Updates

http://www.aten-usa.com/support

Telephone Support 1-888-999-ATEN ext 4998

- 4 -

Package Contents

The VM0202H 2x2 4K HDMI Matrix Switch package contains the

following items:

1 VM0202H 2x2 4K HDMI Matrix Switch

1 Rack Mounting Kit

1 User Instructions*

1 Power Adapter

1 IR Control

1 IR Receiver

Check to make sure that all the components are present and that nothing

got damaged in shipping. If you encounter a problem, contact your dealer.

Read this manual thoroughly and follow the installation and operation

procedures carefully to prevent any damage to the unit, and/or any of the

devices connected to it.

*Features may have been added to the VM0202H since this

manual was printed. Please visit our website to download the

most up-to-date version of the manual.

Manual Date: 2017-03-14

ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights

reserved. All other trademarks are the property of their respective owners.

- 5 -

Overview

The ATEN VM0202H, a 2x2 4K HDMI Matrix Switch supports up to 4K

resolutions, including UHD (3840 x 2160) and DCI (4096 x 2160), and

refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0). Ready for future high-

definition trends, the VM0202H is ideal for applications where the routing

of up to 4K digital video signals is required, such as in classrooms,

auditoriums and department stores.

The matrix switch offers an easy and affordable way to route any of 2

HDMI video sources to any of 2 HDMI displays and can be controlled and

operated through front-panel pushbuttons, IR and RS-232, ensuring

optimum control capabilities.

- 6 -

Features

Connects any of 2 HDMI sources to any of 2 HDMI displays

Supports 4K resolutions of UHD (3840 x 2160) and DCI (4096 x

2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0)

EDID Expert™ – selects optimum EDID settings for smooth power-

up, high-quality display, and use of the best video resolution across

different screens

Multiple Control Methods – system management via front-panel

pushbuttons, IR and RS-232 serial control

Supports Dolby True HD and DTS HD Master audio

Signaling rates up to 3.4 Gbits for flawless 4K output

HDMI (3D, Deep Color, 4K) and HDCP 1.4 compatible

Consumer Electronics Control (CEC) allows interconnected HDMI

devices to communicate and respond to a single remote control

Supports ATEN LockPro™ HDMI cable lock for securing HDMI

cables

ESD protection for HDMI ports

Firmware upgradeable

Rack Mountable 1U design

- 7 -

System Requirements

Source Devices

HDMI Type A output connector(s)

Note: A DVI/HDMI adapter is required when connecting a DVI source

device.

Display Devices

Display devices or receivers with an HDMI Type A input connector

Cables

1 HDMI cable for each source device you will be connecting

1 HDMI cable for each display device you will be connecting

Note: 1. No cables are included in this package. We strongly

recommend that you purchase high-quality cables of the

appropriate length since this will affect the quality of the audio

and video display. Contact your dealer to purchase the correct

cable sets.

2. If you wish to utilize the VM0202H’s high-end serial controller

function, you will need to purchase an appropriate RS-232

cable. See Installing the RS-232 Controller, page 12.

- 8 -

Components

VM0202H Front View

No. Component Function

1 Output

Pushbuttons

Press an Output Port Pushbutton to select an Input

Port.

Note: The OUTPUT (1–2) front panel pushbuttons

have built-in Green LEDs that light to indicate they

have been selected.

2 Input Select

LEDs

Indicates the input port of the corresponding output

port (output 1 or 2)

3 Power

Pushbutton

This Pushbutton is to power on and off the VM0202H.

- 9 -

VM0202H Rear View

No. Component Function

1 Grounding

Terminal

The grounding wire attaches here. See Grounding,

page 11, for further details.

2 Power Jack This is the DC power jack. The power cord from a

power source plugs in here.

3 HDMI Output

Ports

The cables from the HDMI display devices plug into

these ports.

4 HDMI Input

Ports

The cables from the HDMI source devices plug into

these ports.

5ExternalIR

Receiver Port

This 3.5 mm Mini Stereo Jack connects to the IR

Receiver unit included with your product.

6 Micro USB Port Use this port to upgrade the Firmware. see Firmware

Upgrade, page 17

7 RS-232 Serial

Port

This serial remote port is for input source selection.

- 10 -

IR Remote Control

Note: The model number of the remote control unit shown above is

2XRT-0106G.

No. Component Function

1 Power ON/OFF Use the ON and OFF pushbuttons to turn the Output

displays on or off – by individual port, or all ports.

See IR Remote Selection, page 16 for details.

2 Output

Pushbuttons

1–2

Press Output pushbuttons 1–2 to select the display

you want to configure, then within 2 seconds press

the Input pushbutton 1–2 to select the source for the

display.

For detailed instructions, see Output Pushbuttons,

page 15.

3 Input

Pushbuttons

1–2

Press Input pushbuttons 1–2 to select the source

you want to display after you have pressed an Output

pushbutton 1–2. You must press the Input

pushbutton within 2 seconds after pressing the

Output pushbutton.

For detailed instructions, see , page 15.

Otros manuales para VM0202H

Tabla de contenidos

Otros manuales de Cambiar de ATEN

ATEN

ATEN CS52D Manual de usuario

ATEN

ATEN CS18208 Manual de usuario

ATEN

ATEN Altusen KN2116VA Manual de usuario

ATEN

ATEN ALTUSEN KL1508A Manual de usuario

ATEN

ATEN CS1942 Manual de usuario

ATEN

ATEN KH1508Ai Manual de usuario

ATEN

ATEN CM1164A Manual de usuario

ATEN

ATEN KVMP CS1782A Manual de usuario

ATEN

ATEN ES0152 Manual de usuario

ATEN

ATEN VS482B Manual de usuario

ATEN

ATEN ALTUSEN KL1508 Manual de usuario

ATEN

ATEN CS1148H-AT-U Manual de usuario

ATEN

ATEN Master View CS-1754 Manual de usuario

ATEN

ATEN CS-228 Manual de usuario

ATEN

ATEN Altusen KH1508a Manual de usuario

ATEN

ATEN CS-1262 Manual de usuario

ATEN

ATEN Altusen RCMDP101U Manual de usuario

ATEN

ATEN KVMP CS1822 Manual de usuario

ATEN

ATEN CS692 Manual de usuario

ATEN

ATEN ALTUSEN KL1508A Instrucciones de funcionamiento y mantenimiento

ATEN

ATEN CL6708MW Manual de usuario

ATEN

ATEN ALTUSEN SN0108 Manual de usuario

ATEN

ATEN ALTUSEN KL1508 Manual del operador

ATEN

ATEN VS482 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario