ATEN KE Series Manual de usuario
2. Remove the bottom and side screws from the KE Series transmitter unit.
KE Series Single Rack Mount Kit - 2X-031G
Installation:
Package Contents:
1. Remove the screws and plastic guards from the KE Series receiver unit.
This single rack mounting kit installs one KE Series unit in
1U of server rack space.
1 x right mounting bracket
1 x left mounting bracket
2 x flat head screws
2 x pan head screws
Installation Guide
MISC00000271 03/2021 V3.0
KE Series Single Rack Mount Kit - 2X-031G
4. Screw the mounting brackets to the rack. The example used in the diagram below is a KE Sereis
transmiiter unit, the proceudre for connecting to a receiver unit is identical.
3. Use the flat head and pan head screws provided to install the right and left mounting brackets. The
example used in the diagram below is a KE Sereis transmiiter unit, the proceudre for connecting to a
receiver unit is identical.
Installation Guide
pan head screws
pan head screws
flat head screws
Otros manuales para KE Series
4
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Rack y soporte de ATEN
ATEN
ATEN 2K-0001 Manual de usuario
ATEN
ATEN VE-RMK3U Manual de usuario
ATEN
ATEN 2X-045G Manual de usuario
ATEN
ATEN VE-RMK1U Manual de usuario
ATEN
ATEN KE Series Manual de usuario
ATEN
ATEN VE-RMK2U Manual de usuario
ATEN
ATEN 2X-010G Manual de usuario
ATEN
ATEN KE Series Manual de usuario
ATEN
ATEN VE-RMK 1U Manual de usuario
ATEN
ATEN KE Series Manual de usuario
