ATEN VS-102 Manual de usuario
VS102
USER MANUAL
2-Port Video Splitter
FCC / CE Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority
to operate this equipment.
CE Warning: This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
RoHS
This product is RoHS compliant.
SJ/T 11364-2006
The following contains information that relates to China.
- 3 -
VS102 User Manual
Online Registration
Telephone Support
Technical Support
For international online technical support – including
troubleshooting, documentation, and software updates:
http://support.aten.com
For North American technical support:
International http://support.aten.com
International 886-2-8692-6959
China 86-10-5255-0110
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
United Kingdom 44-8448-158923
Online
Technical
Support
Troubleshooting
Documentation
Software Updates
http://support.aten.com
Telephone Support 1-888-999-ATEN ext 4998
- 4 -
Package Contents
The VS102 package contains the following items:
1 VS102 2-Port Video Splitter
1 Power Adapter
1 User Instructions*
Check to make sure that all the components are present and that
nothing got damaged in shipping. If you encounter a problem,
contact your dealer.
Read this manual thoroughly and follow the installation and
operation procedures carefully to prevent any damage to the unit,
and/or any of the devices connected to it.
*Features may have been added to the VS102 since this
manual was published. Please visit our website to download
the most up-to-date version of the manual.
Copyright © 2014 ATEN® International Co., Ltd.
Manual Part No. PAPE-1280-201G
Printing Date: 2014-06-17
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
- 5 -
Overview
The VS102 2-Port Video Splitter takes a single VGA input signal
and splits it into 2 VGA outputs, each at 250 MHz after
duplication. The VS102 can boost signals and extend the
transmission up to 65m with a built in video gain knob for display
adjustment at different distances.
The VS102 splitter provides the best way to split a single VGA
video source into two VGA output signals, which can be
transmitted to displays over long distance.
- 6 -
Features
Splits a VGA input signal into 2 VGA outputs
Cascadable up to 3-levels to provide 8 output signals
Supports up to 250 MHz bandwidth
Long distance transmission - up to 65 m*
Supports High video resolution - up to 1920 x 1440
DDC, DDC2, DDC2B Compatible (Port 1 only)
Supports VGA, XGA, SVGA, UXGA and multisync monitors
OS Support: Windows 2000, Windows XP, Linux, Mac and
Sun
Compact design with convenient topside connection, lays flat
on a desktop or mounts on a wall
*Video content sent over very long distance using a VGA cable
might result in slight degradation of the video signal and quality.
- 7 -
System Requirements
Source Device
VGA video card with HDB-15 connector
Display Device(s)
A VGA, SVGA, UXGA, WUXGA or multisync monitor or
multimedia projector with an HDB-15 connector
Cables
1 VGA cable for the source device
1 VGA cable for each display device you will be connecting
- 8 -
Components
VS102 Front View
Note: This product is not suitable for CGA, EGA, or
Monochrome type monitors using a digital video signal.
No. Component Function
1 Power LED Lights green to indicate the device has
power.
2 Signal LED Lights orange to indicate
3 DC Jack The DC 9V 300mA (min.) power adapter
plugs in here.
4 Brightness
Control
This slide switch can be set to high or low
to manage the displays brightness.
5 Video In The VGA cable that connects to the video
source plug in here.
6 Video Out 1 The VGA cable that connect to the video
display and plugs in here.
7 Video Out 2 The VGA cable that connect to the second
video display and plugs in here.
- 9 -
Installation
Installation of the VS102 is simply a matter of plugging in the
appropriate cables.
To install the splitter, refer to the installation diagram on page 10
as you perform the following steps:
1. Use a VGA cable to connect the computer's video port to the
VIDEO IN port of the VS102.
2. Use the video displays VGA cables to connect to the VIDEO
OUT 1 and 2 ports of the VS102.
3. Plug the Power Adapter into an AC source; plug the Power
Adapter cable into the DC IN socket on the VS102's side
panel.
4. Power on the VS102.
Note: Use a DC 9V adapter with polarities only.
1. Make sure that the power to all devices you will be
installing has been turned off.
2. Make sure that all devices you will be installing are
properly grounded.
- 10 -
IInstallation Diagram
1
2
3
Otros manuales para VS-102
1
Tabla de contenidos
Otros manuales de Convertidor de medios de ATEN
ATEN
ATEN CV-130A Manual de usuario
ATEN
ATEN IC485SN Manual de usuario
ATEN
ATEN CV-130 Manual de usuario
ATEN
ATEN RS-232 Manual de usuario
ATEN
ATEN CV190 Manual de usuario
ATEN
ATEN VS192 Manual de usuario
ATEN
ATEN Interface Converter IC-485S Manual de usuario
ATEN
ATEN CV-130A Manual de usuario
ATEN
ATEN VS132A Manual de usuario
ATEN
ATEN Interface Converter IC-485S Manual de usuario
ATEN
ATEN IEEE-488/Parallel Converter IC-488P Manual de usuario
ATEN
ATEN VS192 Manual de usuario
ATEN
ATEN VS92A Manual de usuario
ATEN
ATEN CV-131 Manual de usuario
ATEN
ATEN UC-232A Manual de usuario
ATEN
ATEN UC-232A Manual de usuario
ATEN
ATEN IC-485AI Manual de usuario
ATEN
ATEN VanCryst VC160A Manual de usuario
ATEN
ATEN CV-130 Manual de usuario
ATEN
ATEN Interface Converter IC-485S Manual de usuario
