ATEN VE882 Manual de usuario

VE882 / VE892

USER MANUAL

HDMI Optical Extender

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with

the limits fora Class Adigital device, pursuant to Part 15 ofthe FCC Rules.

Theselimitsaredesignedtoprovidereasonableprotectionagainstharmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

The device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCCCaution:Any changesormodificationsnotexpresslyapprovedby the

party responsible for compliance could void the user's authority to operate

this equipment.

CE Warning: This is a class A product. In a domestic environment this

product may cause radio interference in which case the user may be

required to take adequate measures.

RoHS

This product is RoHS compliant.

KCC Statement

유선 제품용 / A 급 기기 (업무용 방송 통신 기기 )

이 기기는 업무용 (A 급)전자파적합기기로서 판매자 또는 사용자는 이점

을 주의하시기 바라며 ,가정 외의 지역에서 사용하는 것을 목적으로 합니

다.

- 3 -

SJ/T 11364-2006

The following contains information that relates to China.

- 4 -

VE882 / VE892

User Manual

Online Registration

Telephone Support

Technical Support

For international online technical support – including

troubleshooting, documentation, and software updates:

http://eservice.aten.com

For North American technical support:

International http://eservice.aten.com

International 886-2-8692-6959

China 86-10-5255-0110

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8448-158923

Email Support [email protected]

Online

Technical

Support

Troubleshooting

Documentation

Software Updates

http://www.aten-usa.com/support

Telephone Support 1-888-999-ATEN ext 4998

Manual Date: 08/2015

F/W Version: V1.3.121

ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights

reserved. All other trademarks are the property of their respective owners.

- 5 -

Package Contents

The VE882 / VE892 package contains the following items:

1 VE882T or VE892T

1 VE882R or VE892R

1 IR Transmitter

1 IR Receiver*

1 Mounting kit

2 Power Adapters

1 User Instructions*

Check to make sure that all the components are present and that

nothing got damaged in shipping. If you encounter a problem,

contact your dealer.

Read this manual thoroughly and follow the installation and

operation procedures carefully to preventanydamageto theunit,

and/or any of the devices connected to it.

*The device supports full frequency IR signals from 30kHz to

60kHz. The IR receiver cable included with the package,

however, only supports signals from 30kHz to 56 kHz.

Features may have been added to the VE882 / VE892 since

this manual was published. Please visit our website to

download the most up-to-date version of the manual.

- 6 -

Overview

The VE882 / VE892 is an HDMI Optical Extender that overcomes

the length restriction of standard HDMI cables by using optical

fiber to send high definition audio and video signals over large

distances.

It accepts an audio-video stream from a local source and

serializes the data to pass it over a single 3.125 Gbps optical link

(for resolutions up to 1080p@60Hz with 24-bit color).

The VE882 / VE892 can also extend the IR remote control and

transfer RS-232 signals (up to 115kbps) in both directions,

allowing you to connect serial devices, such as touch screens

and barcode scanners.

- 7 -

Features

Extends the transmission range of HDMI, IR and RS-232

signals using one fiber optic cable

Very long distance transmission – up to 600m for VE882, up

to 20km for VE892*

HDMI (3D, Deep Color), HDCP compatible – signaling rates

up to 3.125 Gbits

Superior video quality – up to 1080p@60Hz

Supports full frequency IR signals from 30 KHz to 60 KHz*

A bi-directional IR channel for IR signal control; IR

transmission is processed one way at a time

Uses one fiber optic cable to connect the local and remote

units

Supports wide screen formats

Built-in 8KV/15KV ESD protection

Features RS-232 serial port for connecting peripherals such

as touch screens, barcode scanners, etc.

Rack-mountable

Hot-pluggable

Note: 1. The VE882 supports OM3 optical fiber which can

extend the transmission distance up to 300 meters.

2. The device supports full frequency IR signals from

30kHzto60kHz.TheIR receivercableincludedwiththe

package, however, only supports signals from 30kHz to

56 kHz.

- 8 -

Consoles

An HDMI display with HDMI Type A output connector

Computers

Video source with an HDMI Type A input connector

Cables

Fiber optic cable (LC, single mode) to connect the Transmitter

and Receiver VE882 / VE892 units*

1 HDMI cable for the source device you will be connecting**

1 HDMI cable for the display device you will be connecting**

If you wish to utilize the VE882 / VE892’s high-end serial

controller function, you need to purchase an appropriate RS-

232 cable.

Note: 1. It is recommended that you use a Single Mode fiber

optic cable that conforms to IEC 60793-2-50 B1.1 or

ITU-T G.652.B specifications.

2. No cables are included in this package. We strongly

recommend that you purchase high-quality cables of

appropriate length since this will affect the quality of the

audio and video display. Contact your dealer to

purchase the correct cable sets.

- 9 -

Components

Top View

Front View

No. Component Description

1 Power / Link

LED The LED blinks to indicate that the unit is receiving power.

The LED lights to indicate that the fiber optic cable is

detected, and communication between the transmitter and

receiver is reliable.

.Component Description

1 HDMI Input/

Output Port The cable from your HDMI source device plugs into the

HDMI Input port (VE882T / VE892T).

The cable from your HDMI display device plugs into this

HDMI Output port (VE882R / VE892R).

2 IR Port Plug your IR Transmitter/Receiver here to transmit/receive

signals to/from the IR remote control.

3 RS-232 Port

(Tx/Rx/Gnd) Connect a computer or high-end system controller via this

serial port.

123

- 10 -

Rear View

*The Optical In/Out port’s color varies as follows:

VE882T - Blue

VE882R - Yellow

VE892T - Purple

VE892R - White

No. Component Description

1 Optical In/Out

Port* The fiber optic cable that connects the transmitter and

receiver units plugs in here.

2 Power Jack The power adapter cable plugs in here.

Otros manuales para VE882

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario