4
BEFORE USE
1. %HIRUH XVLQJ this product, read the owner’s manual
cRPSOHWHO\ and familiari]e \ourself WKRURXJKO\ with the
product and the KD]DUGV associated with its improper use.
VHULI\ that the product and the application are compatible.
Inspect HQJLQH stand before each use. Do not use if there
arebent, broNen or craFNedcomponents LQFOXGLQJ labels).
4. (nsurethat casterswheels andadapterplate rotate freel\.
&KHFNIRUDQGWLJKWHQDQ\ORRVHDVVHPEOLHV
Study, understand, and follow all instructions
provided withon this device before use.
Do not exceed rated capacit\.
Use only on a hard, level surface.
LockKHDGSODWHURWDWLQJPHFKDQLVPbefore
applying load
.
Use onlyKDUGHQHGDSSURSULDWHO\VL]HGEROWVWR
VHFXUHHQJLQHWRVWDQG
(QVXUHHQJLQHLVFHQWHUHGDQGVHFXUHGWRWKH
KHDGSODWH2IIFHQWHUORDGLQJPD\FDXVHWKH
HQJLQHWRURWDWHXQH[SHFWHGO\DQGFDXVHWKH
loaded stand to tip over.
8QORFNDQG
DSSO\URWDWLQJPHFKDQLVPVORZO\DQG
carefull\.
'RQRWPRGLI\RUVXEVWLWXWHKDUGZDUHRQWKLV
device.
2QO\DWWDFKPHQWVDQGRUDGDSWHUVVXSSOLHGE\
the manufacturer should be used.
'RQRWXVHWKHGHYLFHIRUDQ\SXUSRVHRWKHU
than that for which it is intended.
Model ATD-7479 does not FRQWDLQDURWDWLQJ
PHFKDQLVPORFN
ExtraordinaryFDUHPXVWEHWDNHQWRHQVXUH
ORDGGRHVQRWURWDWHZKHQXVLQJ
Failure to heedWKHVHPDUNLQJVPD\result in
personal injury and/or property damage.
To avoid crushing and related injuries
NEVERZRUNRQXQGHURUDURXQGD
ORDGVXSSRUWHGRQO\E\HQJLQHFUDQH
ALWAYSXVHDGHTXDWHO\UDWHGHQJLQH
stand.
OPERATION
WARNING:
ALWAYS verify that the product and the
application
are compatible. NEVER load the engine
stand with an engine that extends beyond an imaginary line
drawn connecting the centerlines of the front and rear wheel/
caster axles as show in Fig 3.
!
)LJXUH3HUSKHUDO/RDGLQJ/LPLWRI(QJLQH6WDQG
WARNING: Ensure Lockpins are installedand secured
in
2
) before loading!
1. (QVXUHDSSOLFDWLRQLVFRPSDWLEOHZLWKSURGXFW
AOLJQ HQJLQH with stand, then adjust mountLQJ arms to
PDWFKEHOOKRXVLQJPRXQWLQJEROWKROHV
&DUHIXOO\ secure HQJLQH so that load is centered on stand.
(QVXUH threads are compatible with \RXU HQJLQH and use
washers on both sides of head plate.
4. )RU modelAT' slowl\and FDUIXOO\ HQJDJH the cranN
handle (see )LJ 1). Use precaution when rotating as this
model does not contain a rotating mechanism lock.
ChecNto ensure stand is secure before ZRUNLQJ on or
DURXQGVWDQG1HYHUZRUNXQGHUORDGHGVWDQG
NOTICE: Useonly the handle provided by the manufacturer.
The handle provided with this stand will safely engage
and operate the head plate. If the handle is worn, bent, or
otherwisedamaged, STOP,discontinue use of the stand until
a factory replacement handle assembly can be acquired.
!
MAINTENANCE
3HULRGLFDOO\ inspect each stand. (QVXUH all parts move freel\.
Lubricate the casters periodicall\. To help prevent rust, wipe
clean after each use.
WARNING: Paint contains lead!
DO NOT sand or grind painted surface!
!
Storage
6WRUHWKHHQJLQHVWDQGLQFOHDQGU\HQYLURQPHQW
WARNING
WARNING
