ATCOM Rainbow2 Manual de usuario

Rainbow2 Quick Start Guide

Version 1.0

2014-03-21

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

Content

1. Installation and access.......................................................................................................3

1.1 Connection.............................................................................................................................. 3

1.2 Stand bracket installation instruction......................................................................................3

1.3 Programmable keys’ paster using instruction......................................................................... 7

1.4 Check IP.................................................................................................................................. 8

1.5 Login to web........................................................................................................................... 8

2. Configure phone to register SIP account....................................................................8

2.1 Network Configuration........................................................................................................... 8

2.2 Account Configuration..........................................................................................................10

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

1. Installation and access

1.1 Connection

Set up Rainbow2 as below:

1.2 Stand bracket installation instruction

A. Put the bottom side of the IP phone upside and press one-side joints of stand

bracket into the slot, please refer the picture as below:

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

B. Press the other side joints into the slot according to the direction of the

arrow:

C. It is the right picture after fixing the stand bracket below:

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

D. Disassemble the stand bracket:

Push the spring joint of stand and pull the stand according to the direction of the

arrow. When the joints are pulled out of the slot, you can take off the stand

bracket

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

1.3 Programmable keys’ paster using instruction

Step1. Use needle or some other tools to insert into the hole of the plastic sheet,

hog the plastic sheet.

Step2. Lift out the plastic sheet

Step3. Take off the plastic sheet

Step4. Use needle or some other tools to insert into the edge of the paster, hog

and lift out the paster

Step5. Write down the identification of each programmable key on the paster

after taking off the paster

Step6. Put back the paster

Step7. Insert the plastic sheet into the slot

Step8. Push the other side of the plastic sheet into the other slot

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

Rainbow E’s paster using instruction

Steps to use Rainbow E’s paster are the same as programmable keys’ as below:

1.4 Check IP

Rainbow2 uses DHCP mode by default, and you can review its current IP address

by pressing

key when it is powered on and connected to the network.

1.5 Login to web

Modify your computer’s IP address to the same network as Rainbow2. Enter

Rainbow2’s IP address in the web browser and press Enter, you will access to

Rainbow2's user webpage without password.

Click "admin" which is on the right corner to enter administrator webpage.

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

2. Configure phone to register SIP account

2.1 Network Configuration

LAN Port Configuration

Enter "Network" -> "Basic" page.

There are 3 ways to connect to internet DHCP, Static and PPPoE, please choose

one according to your own situation.

Network mode: you can choose DHCP, Static and PPPoE

DHCP: Rainbow2 default to use DHCP to obtain IP from DHCP Server.

Static: If you want to set the IP as static, you should fill IP, Netmask,

Gateway and DNS information.

PPPoE: If Rainbow2 is connected to the modem, you should fill ADSL

account and password which are assigned by your network service provider.

Password Configuration

Enter "Network" -> "Advance" page.

There are 2 modes to set the authority of web accessing and command line:

User mode and Admin mode. All the parameters can be visible and changed in

Admin mode while part of them can be visible in User mode.

Rainbow2 Quick Start Guide

ATCOM TECHNOLOGY CO., LIMITED

Enable Web Server: enable or disable web access. If choose "no", you can

not access Rainbow2’s webpage.

Admin password: set admin webpage access password.(username:admin)

User password: set user webpage access password.(username:user)

2.2 Account Configuration

Enter "Account" -> "SIP" page to configure SIP account which is provided from

the SIP Server.

Enable: whether enable this SIP register.

Display Name: This name will display on the screen of Rainbow2. It will

display the name configured for the SIP account by the SIP server

preferentially. It can also be kept blank.

User ID: Username of SIP account.

Authenticate ID: normally is the same as User ID, can also be kept blank if

there is no special requirement from the SIP server.

Password: Password of SIP account.

Sip Server: SIP server address, support both IP address and domain name.

Sip Port: SIP server port, default is 5060.

After configured and clicked ‘Submit’ to enable register this account, please

check the status of this account in System Status page. The Registration State

will be registered if this account registered successfully.

Otros manuales para Rainbow2

Tabla de contenidos

Otros manuales de Teléfono IP de ATCOM

ATCOM

ATCOM AT-610P Manual de usuario

ATCOM

ATCOM CT1X Manual de usuario

ATCOM

ATCOM AT820 series Manual de usuario

ATCOM

ATCOM AT800D Manual de usuario

ATCOM

ATCOM Nimbus CQ400 Manual de usuario

ATCOM

ATCOM AT-640 Manual de usuario

ATCOM

ATCOM AT-620P Manual de usuario

ATCOM

ATCOM A1XW series Manual de usuario

ATCOM

ATCOM AT800D Manual de usuario

ATCOM

ATCOM AT810 series Manual de usuario

ATCOM

ATCOM AT840 series Manual de usuario

ATCOM

ATCOM AT-610P Manual de usuario

ATCOM

ATCOM D2X Manual de usuario

ATCOM

ATCOM AT-640 Manual de usuario

ATCOM

ATCOM A20 Manual de usuario

ATCOM

ATCOM AT800 Series Manual de usuario

ATCOM

ATCOM D2SW Manual de usuario

ATCOM

ATCOM Rainbow2 Manual de usuario

ATCOM

ATCOM A48W Manual de usuario

ATCOM

ATCOM AT800 Series Manual de usuario

ATCOM

ATCOM AT840 series Manual de usuario

ATCOM

ATCOM CT1X Manual de usuario

ATCOM

ATCOM A21 Manual de usuario

ATCOM

ATCOM AT800 Series Manual de usuario

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Polycom

Polycom Polycom VVX 600 Manual de usuario

Polycom

Polycom SoundPoint IP 450 Manual de usuario

Cisco

Cisco SPA-500 Series Manual de usuario

Polycom

Polycom SoundPoint IP 650 Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Cisco

Cisco 7962 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

Avaya

Avaya Integral 5 R3.0 Manual de usuario

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Avaya

Avaya 4600 Series Manual de servicio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario