ATAGO RX-5000i Manual

Installation Qualification

(IQ)

RX-5000i

Automatic Digital Refractometer

Installation Qualification Procedure

IQ Procedure

Install the instrument, following this procedure, and fill out the Installation Report found on

the following page.

1. Unpacking

1) Unpack the RX-5000i and place it on a level surface, such as a desk. Remove the

packaging materials from the instrument and included accessories. Check the

appearance of the RX-5000i for scratches and blemishes.

2) Refer to the list of included accessories in the instruction manual to confirm that the

instrument has arrived complete with all accessories.

2. Choosing a Location

Place the instrument in an environment that meets the following criteria.

1) A level surface with no vibration

2) Away from direct sun light and heat sources

3) Free of dust and corrosive fumes

4) An ambient temperature within the range of 15.00 to 30.00℃

5) Within 2 meters from an electrical outlet

6) Provides sufficient room for operation

3. Confirming the Model Name and Serial Number

1) A label indicating the model name and serial number is found on the right rear side

of the instrument.

2) Check the model name and serial number on the label against the model name and

serial number listed on the inspection report as well as on the registration card.

4. External Devices

The DP-63 Digital Printer (sold separately) may be connected to the RX-5000i.

1) Unpack the printer and check that it has arrived complete with all accessories.

2) Place the printer next to the RX-5000i and connect them with the signal cable.

3) Referring to the instruction manual, connect the AC adaptor for the printer and

insert the printer paper.

5. Powering On

After the RX-5000i (and printer if using) have been set up, connect the AC power cable

to the socket. Follow the procedure in the Installation Report under “Turning on Power”

to test the operation.

1/2

E-IQ1011-3276-J01

Installation Qualification

(IQ)

RX-5000i

Automatic Digital Refractometer

Installation Report

Item Result

Unpacking

1. Scratches on the body

□No

□Yes

2. Scratches on the prism □No □Yes

3. Included accessories □Complete □Incomplete

Missing accessories:

Choosing a

location

1. Environmental conditions

□Level surface □No direct sun light □No heat source nearby

□Dust-free □Fume-free

□Temperature within the 15 to 30℃range

2. Sufficient space □Yes □No

3. Power supply □Electrical outlet within 2 m

4. Location name

Confirming the

model name and

serial number

1. Model name

2. Serial number

External devices

Using printer?

□Yes

□No

□Connection successful □Designated printer (DP-63)

Powering on

1. Turn the power on to the refractometer and printer.

2. Display the home screen. Touch “MEASUREMENT”

to display the

measurement screen. Make sure that MODE-

1 is selected, and that

the target temperature is set to 20.00℃.

3. Zero-set and measure distilled water.

i. Apply distilled water on the prism.

ii. Touch “ZERO.” (WAITING > READING > ZERO SET END)

iii. Touch “START.”(WAITING > READING > 0.00)

iv. Wipe the water off the prism with tissue paper.

4. Turn the power off of the refractometer and printer.

Operation

Manager

Name :

Operator’s signature :

Test date :

Approver’s signature :

Date :

2/2

E-IQ0704-3261-J01

Otros manuales para RX-5000i

Otros manuales de Instrumento de medición de ATAGO

ATAGO

ATAGO PAL-Easy ACID2 Manual de usuario

ATAGO

ATAGO PAL-38S Manual de usuario

ATAGO

ATAGO PAL-08S Manual de usuario

ATAGO

ATAGO PAL-22S Manual de usuario

ATAGO

ATAGO PAL-HIKARi 5 Manual de usuario

ATAGO

ATAGO 4403 Manual de usuario

ATAGO

ATAGO PAL-05S Manual de usuario

ATAGO

ATAGO PAL-86S Manual de usuario

ATAGO

ATAGO PAL-Easy ACID181 Manual de usuario

ATAGO

ATAGO MASTER Series Manual de usuario

ATAGO

ATAGO PAL- HIKARi 18 Manual de usuario

ATAGO

ATAGO PAL-mOsm. BLT/i Manual de usuario

ATAGO

ATAGO PAL-66S Manual de usuario

ATAGO

ATAGO PAL-Easy ACID4 Manual de usuario

ATAGO

ATAGO PAL-15S Manual de usuario

ATAGO

ATAGO PAL-HIKARi Ripeness Manual de usuario

ATAGO

ATAGO PAL-60S Manual de usuario

ATAGO

ATAGO AP-300 Manual de usuario

ATAGO

ATAGO PAL-LOOP 3842 Manual de usuario

ATAGO

ATAGO PAL-25S Manual de usuario

ATAGO

ATAGO PRM-TANK100 (FER) Manual de usuario

ATAGO

ATAGO PAL-Easy ACID1 Manual de usuario

ATAGO

ATAGO MASTER-S10M Manual de usuario

ATAGO

ATAGO RX-5000 i-Pius Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario