Asus A7T Series Manual de usuario

Disassembly procedure

Chapter

Disassembly Procedure

Please follow the information provided in this section to perform the

complete disassembly procedure of the notebook. Be sure to use

proper tools described before.

SUS A7T Series Notebook consists of various modules. This chapter describes the

procedures for the complete notebook disassembly. In addition, in between

procedures, the detailed disassembly procedure of individual modules will be

provided for your service needs.

The disassembly procedure consists of the following steps:

•Battery Module

•HDD Module

•Wireless LAN Module

•TV Tuner Module

•Second Memory Module

•CPU Module

•ODD Module

•Keyboard

•Main Memory Module

•Top Case Module

•LCD Module

•Bottom Case Module

•Motherboard Module

2 - 1

Disassembly procedure

Battery Module

BATTERY

The illustration below shows how to remove the battery module.

1. Turn over the notebook. Unlock the battery lock (No.1).

2. Slide the battery lock (No.2) and pull the battery pack out.

2 - 2

Disassembly procedure

HDD Module

HDD MODULE

The illustrations below show how to remove the HDD module from the notebook.

Removing HDD Module

HDD MODULE

REMOVAL

1. Remove 2 screws [M2 * 4(L)] here. And lift the cover away.

2. Pull out the hard drive and lift the hard drive away.

Disassembling HDD Module

Remove 4 screws [M3 * 4(L)]] to separate HDD from HDD housing.

HDD

MODULE

DISASS

EMBLY

2 - 3

Disassembly procedure

Wireless LAN Module

WIRELESS

LAN The illustration below shows how to remove the Wireless LAN module.

1. Remove 2 screws [M2 * 4(L)] and remove the Mini-PCI Cover away.

2. Disconnect the main Antenna and open the two latches to pop the MINI PCI

MODULE up then pull it out.

MINI-PCI

TV TUNER

2 - 4

Disassembly procedure

TV TUNER Module

The illustration below shows how to remove the TV TUNER module.

1. Disconnect the RF cable and open the two latches to pop the TV TUNER

module and remove the TV TUNER module from the mini-PCI socket.

TV TUNER

Second Memory Module

MEMORY

MODULE

The A7T Series Notebook has two expansion SO-DIMM slots for you to upgrade the total

memory up to 2GB with two DDR2-533 1024 MB SO-DIMM RAM modules, here

introduce you the second memory slot.

Removing Memory module

MEMORY

REMOVAL 1. Remove 6 screws [M2 * 4(L)] & 1 screw [M2 * 8(L)] and take the CPU door

away.

M2*4(L)

M2*8(L)

2 - 5

Disassembly procedure

2. Remove the Memory module by opening the latches which will pop the

module up to a 45°angle and then pulling out the module.

3. If there is an existing memory, remove it by opening the latches(No. 2),

which will pop the module up to a 45°angle, and then pulling out the

module in that angle (No. 3).

CPU Module

CPU

The illustrations below show how to remove the CPU module from the notebook.

Removing CPU

CPU

REMOVAL 1. Remove 4 screws [M2 *4(L)] by order and take the CPU heat sink module

away.

2 - 6

Disassembly procedure

2. Turn the non-removable screw 180 degrees counter-clockwise to loosen

the CPU. Squeeze the vacuum handling pump and use it to lift the CPU

away.

3. Don’t touch the die above the CPU.

4. Remove the CPU away.

5. Remove CPU thermal pad from CPU die with a pair of tweezers.

Unlock

6. Remove 2 screws [M2 *3(L)] and disconnect the fan cable & DC-in cable

& Bluetooth cable, and then take the FAN module away.

2 - 7

Disassembly procedure

ODD Module

ODD MODULE

The illustration below shows how to remove the ODD module.

1. Remove the rubber and remove 2 screws [M2 * 4(L)] from the bottom

case.

2. Put the screw driver here and push the ODD drive out from the NB.

2 - 8

Disassembly procedure

Keyboard

KEYBOARDDI

SASSEMBLY

The illustration below shows how to remove the keyboard

Removing Keyboard

1. Push the 3 latches in with a pair of tweezers or a single-slotted

screwdriver and lift the keyboard up.

2. Lay the keyboard down over the touch pad module. Do not remove the

keyboard yet. The keyboard FPC is still attached.

K/B

REMOVAL

Removing Keyboard Cable

CABLE

REMOVAL Use a flexible connector tool to unlock the cable connector on both ends

Carefully pull out the keyboard cable with a pair of tweezers.

Lock the connector again to avoid possible breakage

Remove Keyboard from the top case.

3. Disconnect the keyboard FPC and remove the keyboard.

2 - 9

Disassembly procedure

Main Memory Module

MEMORY

MODULE

The A7T Series Notebook has two expansion SO-DIMM slots for you to upgrade the total

memory up to 2GB with two DDR2-533 1024 MB SO-DIMM RAM modules, here

introduce you the main memory slot.

Removing Memory module

1. Remove 1 screws [M2 * 4(L)] and take the DIMM door away.

MEMORY

REMOVAL

2. Remove the Memory module by opening the latches which will pop the

module up to a 45°angle and then pulling out the module.

2 - 10

Tabla de contenidos

Otros manuales de Computadora portátil de Asus

Manuales populares de Computadora portátil de otras marcas

HP ze2401xt - Pavilion Notebook PC Manual de usuario

Velocity

Velocity NoteMagix M10 Manual de usuario

Dell

Dell Alienware 17 R2 Manual de usuario

Toshiba

Toshiba A105-S2236 Manual de usuario

HP ENVY 17 Manual

Winbook

Winbook LM Manual de usuario

Dell

Dell Inspiron 1464 Manual de usuario

Dell

Dell Inspiron 15R 5537 Manual de usuario

HP PROBOOK 4520S Manual

Dell

Dell Latitude ATG D620 Manual de usuario

Sony

Sony VAIO PCG-FX270 Manual de usuario

Dell

Dell Latitude 7310 Manual de usuario

Dell

Dell Precision GU806 Manual de usuario

Sony

Sony VAIO PCG-R505JLK Manual de usuario

Lenovo

Lenovo THINKPAD X32 Manual de usuario

HP Compaq tc4200 Guía de inicio rápido

Toshiba

Toshiba mini NB300 Manual de usuario

Lenovo

Lenovo ThinkPad X201 Tablet Manual