Asus R300 Manual de usuario
Quick
Start Guide
Quick
Start Guide
E3403
15G06A348000
R300
2
Layout Features
1
External Antenna port
Connects to an external antenna for better signal performance (the external
antenna is optional)
2
Micro SD Slot
Insert the external Micro SD memory card to this slot
3
Sleep Mode Button
Press to turn on the device, or to enter into sleep mode
4
Charging LED
Red- charging, Yellow- full charged
5
Bluetooth LED
When function turning on, it's lighting Blue
6
Light Sensor
Automatically adjusts the backlight according to the light in the environment
7
Audio Jack
Uses to connect headsets or two-channel speakers
8
Mini USB
Connects to other devices through a Mini USB cable
9
Speaker
Allows you to listen to music, the navigation voice, and system warning
10
Battery
Battery cover
11
Reset
Push to perform reset function
12
Main Power switch
Turns the main power on/off
12
3
4
5
6
7
8
9
11
12
10
3
You can charge the device from a car charger kit. Plug any of these cables to the mini-USB
port on the right side of the device.
Charging the Battery
NOTE:
- When the Main Power Switch is set to Off, the device
can not be charged.
- Charge the battery before using the device.
- While charging, the power LED lights up in red. When
the battery is fully charged, the power LED turns to yellow.
- Charging may take several hours.
- You can use the device while charging. However, the
device takes much less time to be fully charged in sleep
mode.
To check how much battery power remains:
1. From the main menu, tap Settings.
2. The Sub-menu Settings appears. Tap to display more options.
3. Tap the battery icon, the battery screen appears and displays a battery showing the
battery power that remains.
Car charger kit
4
To turn on the device, set the main power switch (at the bottom of the device) to ON. To enter
into/wake up from sleep mode, press the Sleep Mode Button ( ) on the top of the device.
8
Note:
- When the main power switch is set to Off, the device is not able to be charged.
- If you press the Sleep Mode button when the device is on, it enters into sleep
mode.
- When the device is on, it takes longer time for the battery to be fully charged.
When the device is in sleep mode, the battery can be fully charged quickly.
Install the Car Kit and Turn on the Device
To install the car kit:
1. Attached the cupula to the
windshield inside your car.
2. Press the lever to secure the
cupula on the windshield surface.
Note: Rise the lever (3) to release the
cupula from the windshield.
3. Adjust the angle of the
gooseneck and secure it by
fastening screwcap A.
4. Adjust the angle of the cradle and secure it by fastening screwcap B.
5. Carefully place and slide the device into the cradle.
screwcap A
Main power switch
Sleep Mode
Button
screwcap B
1
2
3
5
5
The main menu appears after you turn on the device. From the main menu, you can:
Tap Navigation to enter the navigation system.
Tap Video Player to play videos.
Tap Music Player to play music.
Tap Photo Viewer to view photos.
Tap Phone to set and use bluetooth and phone features.
Tap Settings to adjust the device settings (see gures below).
Main Menu and Basic Settings
6
The Settings Menu
-The System Info button allows you to view the system information.
- The Language button allows you to choose the language for the text.
-The Backlight button allows you to adjust the LCD brightness. It provides two adjustment
modes, Fix backlight brightness and Adjust by environment brightness. R300 has
Light Sensor function that allows you to adjust LCD brightness for either a lighter or a darker
environment.
-The Date & Time button allows you to set the date and time for your device.
-The Bluetooth button allows you to connect R300 to a cellphone.
-The Volume button allows you to adjust/mute the sound for the device and phone calls.
-The Screen button allows you to calibrate the LCD screen.
-The Battery button allows you to view battery status, see page 3 for detailed information.
- The FM transmitter allows you to transmit navigation voice instruction and music/video
sounds to your car audio system through the FM radio..
7
Multi-Media Features
R300 allows you to play music (mp3 and
wma les), view photos (jpg. and bmp. les)
and videos (wmv. les). Tap the respective
icons from the main menu to launch the
applications.
play list volume
page up
back to the main menu
tap to view the photos as a slide show
page down
tap to play
randomly
tap to
circulate
back to the
main menu
Playing music
Viewing photos
volume
the movie’s name
the length
of the
movie
the time
remains
Playing movies
back to the
main menu
play list
8
Using Navigation
The Navigation Menu
When ASUS GO is started, the Navigation Menu appears. From here you can reach all parts
of ASUS GO.
• Tap Find Address to specify an address as your destination.
• Tap Recent Places for a list of recent destinations.
• Tap Find POI to select one of the stored Points of Interest.
• Tap My Favourites for one of your favourite destinations.
The following actions are also possible in the Navigation Menu:
• Tap Map to browse the map
9
• Tap Settings to customise the way ASUS GO works.
• Tap Exit to stop navigation, and exit ASUS GO.
Operating modes
ASUS GO can operate in two different modes:
• Normal Mode - designed for easy operation when performing frequent tasks
• Expert Mode - designed for performing complex tasks and for advanced settings
This Quick Start Guide covers actions in Normal Mode. See the online User Manual for
detailed instructions in both modes.
To switch to Expert Mode, tap Settings, then tap Expert mode. You can switch back from
Expert Mode to Normal Mode in a similar way.
10
Find an address (1)
1. In the Navigation Menu tap Find Address.
2. Select the destination country. Tap the rst line on the list that shows the country you are
currently in (or searched for recently). On the next screen, select the country from the list. In
some countries, you are also asked to select the state.
3. Select the destination city. Tap the second line on the list that shows the city you are
currently in (or searched for recently). Use the virtual keyboard to type the name of the
city. Once the matching city names t on one page, the list of results will be displayed
automatically. When typing, tap Done any time to display a full list of matching cities
immediately.
• Alternatively, tap the icon next to the city name to select a city from your search history.
4. Enter the street name. Tap the line that says <Enter Street Name> and type the name of
the destination street. Follow the same method as for selecting the city.
Otros manuales para R300
4
Tabla de contenidos
Otros manuales de GPS de Asus
Asus
Asus R300 Manual de usuario
Asus
Asus R300 Manual de usuario
Asus
Asus R700 Manual de usuario
Asus
Asus PATHFINDER Manual de usuario
Asus
Asus R600 - Auto Light Sensor PND Manual de usuario
Asus
Asus S102 - Automotive GPS Receiver Manual de usuario
Asus
Asus R300 Manual de usuario
Asus
Asus GPS-BT100 Manual de usuario
Asus
Asus R700 Manual de usuario
Asus
Asus R600 - Auto Light Sensor PND Manual de usuario
