Asus Vintage V2-PE2 Manual de usuario
V-Series V2-PE2
ASUS PC (Desktop Barebone)
ii
Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form
or by any means, except documentation kept by the purchaser for backup purposes, without the
express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or
altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the
serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,
ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY
OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identication or
explanation and to the owners’ benet, without intent to infringe.
E2506
First Edition V1
March 2006
iii
Table of contents
Notices ................................................................................................ vi
Safety information ..............................................................................vii
About this guide.................................................................................viii
System package contents.................................................................... x
Chapter 1: System Introduction
1.1 Welcome! .............................................................................. 1-2
1.2 Front panel (external)........................................................... 1-2
1.3 Rear panel ............................................................................. 1-4
1.4 Internal components............................................................. 1-7
1.6 LED panel............................................................................ 1-10
Chapter 2: Basic Installation
2.1 Preparation ........................................................................... 2-2
2.2 Before you proceed .............................................................. 2-2
2.3 Removing the side cover and front panel assembly ............. 2-3
2.4 Central Processing Unit (CPU) .............................................. 2-4
2.4.1 Overview ................................................................. 2-4
2.4.2 Installing the CPU .................................................... 2-4
2.4.3 Installing the CPU fan and heatsink assembly......... 2-6
2.5 Installing a DIMM ................................................................... 2-8
2.5.1 Memory congurations ........................................... 2-8
2.5.2 Installing a DDR2 DIMM ......................................... 2-11
2.5.3 Removing a DDR2 DIMM ........................................ 2-11
2.6 Expansion slots ................................................................... 2-12
2.6.1 Installing an expansion card .................................. 2-12
2.6.2 Conguring an expansion card .............................. 2-12
2.6.3 PCI Express x1 slot ............................................... 2-14
2.6.4 PCI slots ................................................................ 2-14
2.6.5 PCI Express x16 slot ............................................. 2-14
2.7 Installing an optical drive .................................................... 2-15
2.8 Installing a hard disk drive .................................................. 2-17
2.9 Installing a oppy disk drive................................................ 2-20
2.10 Re-connecting cables.......................................................... 2-21
2.11 Reinstalling the cover ......................................................... 2-22
iv
Table of contents
Chapter 3: Starting up
3.1 Installing an operating system.............................................. 3-2
3.2 Powering up .......................................................................... 3-2
3.3 Support CD information ........................................................ 3-2
3.3.1 Running the support CD.......................................... 3-3
3.3.2 Utilities menu .......................................................... 3-4
3.3.3 Make disk ................................................................ 3-5
3.3.4 ASUS contact information ...................................... 3-5
3.4 Software information............................................................ 3-6
Chapter 4: Motherboard Info
4.1 Introduction .......................................................................... 4-2
4.2 Motherboard layout .............................................................. 4-2
4.3 Jumpers ................................................................................ 4-3
4.4 Connectors ........................................................................... 4-6
Chapter 5: BIOS Information
5.1 Managing and updating your BIOS ........................................ 5-2
5.1.1 ASUS Update utility ................................................ 5-2
5.1.2 Creating a bootable oppy disk .............................. 5-5
5.1.3 ASUS EZ Flash utility............................................... 5-6
5.1.4 AwardBIOS Flash utility ........................................... 5-7
5.1.5 Saving the current BIOS le .................................... 5-9
5.1.5 ASUS CrashFree BIOS 2 utility .............................. 5-10
5.2 BIOS setup program............................................................ 5-11
5.2.1 BIOS menu screen ................................................. 5-12
5.2.2 Menu bar ............................................................... 5-12
5.2.3 Legend bar............................................................ 5-13
v
Table of contents
5.2.4 Menu items ........................................................... 5-13
5.2.5 Sub-menu items.................................................... 5-13
5.2.6 Conguration elds ............................................... 5-13
5.2.7 Pop-up window...................................................... 5-14
5.2.8 General help .......................................................... 5-14
5.3 Main menu........................................................................... 5-15
5.3.1 System Time ........................................................ 5-15
5.3.2 System Date ........................................................ 5-15
5.3.3 Legacy Diskette A ............................................... 5-14
5.3.4 Primary, Third, and Fourth IDE Master/Slave ........ 5-16
5.3.5 Primary IDE Master/Slave...................................... 5-16
5.3.6 First/Second SATA Master ................................... 5-18
5.3.7 HDD SMART Monitoring......................................... 5-19
5.3.8 Installed Memory................................................... 5-19
5.3.9 Usable Memory...................................................... 5-19
5.4 Advanced menu .................................................................. 5-19
5.4.1 CPU Conguration ................................................. 5-20
5.4.2 Chipset.................................................................. 5-21
5.4.3 PCIPnP ................................................................... 5-23
5.4.4 Onboard Device Conguration .............................. 5-24
5.4.5 USB Conguration ................................................. 5-25
5.5 Power menu ........................................................................ 5-26
5.5.1 ACPI Suspend Type............................................... 5-26
5.5.2 ACPI APIC Support ................................................ 5-26
5.5.3 APM Conguration ................................................ 5-27
5.5.4 Hardware Monitor.................................................. 5-29
5.6 Boot menu .......................................................................... 5-30
5.6.1 Boot Device Priority .............................................. 5-30
5.6.2 Boot Settings Conguration ................................. 5-31
5.6.3 Security................................................................. 5-32
5.7 Exit menu............................................................................ 5-33
vi
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
WARNING! The use of shielded cables for connection of the monitor to
the graphics card is required to assure compliance with FCC regulations.
Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment.
vii
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from
the electrical outlet before relocating the system.
•
When adding or removing devices to or from the system, ensure that
the power cables for the devices are unplugged before the signal cables
are connected.
•
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Operation safety
•
Before installing devices into the system, carefully read all the
documentation that came with the package.
•
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the
product in any area where it may become wet. Place the product on a
stable surface.
•
If you encounter technical problems with the product, contact a
qualified service technician or your retailer.
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
VORSICHT: Explosionsgetahr bei unsachgemäßen Austausch der
Batterie. Ersatz nur durch denselben oder einem vom Hersteller
empfohlenem ähnljchen Typ. Entsorgung gebrauchter Batterien nach
Angaben des Herstellers.
LASER PRODUCT WARNING
CLASS 1 LASER PRODUCT
viii
About this guide
Audience
This guide provides general information and installation instructions about
the ASUS Vintage V-Series V2-PE2 barebone system. This guide is intended
for experienced users and integrators with hardware knowledge of personal
computers.
How this guide is organized
This guide contains the following parts:
1. Chapter 1: System introduction
This chapter gives a general description of the ASUS
Vintage V2-PE2. The chapter lists the system features, including
introduction on the front and rear panel, and internal components.
2. Chapter 2: Basic installation
This chapter provides step-by-step instructions on how to install
components in the system.
3. Chapter 3: Starting up
This chapter helps you power up the system and install drivers and
utilities from the support CD.
4. Chapter 4: Motherboard information
This chapter gives information about the motherboard that comes
with the system. This chapter includes the motherboard layout,
jumper settings, and connector locations.
5. Chapter 5: BIOS information
This chapter tells how to change system settings through the BIOS
Setup menus and describes the BIOS parameters.
ix
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a
task.
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS Websites
The ASUS websites worldwide provide updated information on
ASUS hardware and software products. Refer to the ASUS contact
information.
2. Optional Documentation
Your product package may include optional documentation, such as
warranty yers, that may have been added by your dealer. These
documents are not part of the standard package.
x
System package contents
Check your Vintage V2-PE2 system package for the following items.
If any of the items is damaged or missing, contact your retailer
immediately.
Item description
1. ASUS Vintage V2-PE2 barebone system with
• ASUS motherboard
• 300 W PFC power supply unit
• ASUS chassis
2. Cable
• AC power cable
3. Support CD
4. User guide
Otros manuales para Vintage V2-PE2
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de De oficina de Asus
Asus
Asus S501ME Manual de usuario
Asus
Asus ETC11009 Manual de usuario
Asus
Asus GS30 Manual de usuario
Asus
Asus D830MT Manual de usuario
Asus
Asus VivoPC Barebone Manual de usuario
Asus
Asus T2-PE1 Manual del operador
Asus
Asus Pundit P2-PE2 Manual de usuario
Asus
Asus A4320 Series Manual de usuario
Asus
Asus E510 Series Manual de usuario
Asus
Asus Vintage V2-PE3 Manual de usuario
Asus
Asus Zen AiO Manual de usuario
Asus
Asus Essentio CM6650 Manual de usuario
Asus
Asus ET2221AGKR Manual de usuario
Asus
Asus ET2702IGKH Manual de usuario
Asus
Asus E810 Series Manual de usuario
Asus
Asus Terminator 2 Barebone System T2-P Manual de usuario
Asus
Asus AAEON BOXER-8646AI Manual de usuario
Asus
Asus CM1740-US-2AE Manual de usuario
Asus
Asus CM1740-US-2AB Manual de usuario
Asus
Asus T5 Series Manual de usuario
