Assa Abloy HES KS200-640 Manual de usuario

3085006.002 Rev. 3 1

HES, Inc.

Phoenix, AZ

1.800.626.7590

www.hesinnovations.com

KS200-640 / KS210-640 Server Cabinet Lock Series

Installation Instructions

3085006.002 Rev. 3 2

Package Contents

Recommended Tools

Approved RFID Credential

Phillips P2 driver

WT-2 Wiegand Test Box

Optional Additional Tools:

SFIC Core for key override or

SFIC Blank Plastic Core

Normally Open DPS Switches

System Side Interface Cable

Specifications

Voltage: 12–24V DC ±10% (Power Supply not provided)

KS200 / KS210 Current Consumption:

Model KS200 / KS210

Input Voltage (V DC) 12V DC 24V DC

Current

Standby Avg.150 mA 40 mA

Max Avg.2100 mA 75 mA

Peak3130 mA 130 mA

1 Standby AVG – RMS current draw without a card in the RF field with both LEDs active.

2 Maximum AVG – RMS current draw during continuous card reads, and both LEDs active.

3 Peak – Highest instantaneous current draw during RF Communication, in-rush, or unlock cycles

Handling Selectors

Lock

Handle Mounting Plate

Mounting Screws

Cam

DPS Cable

SFIC Cam

Lock Side

Interface Cable

3085006.002 Rev. 3 3

Operating Temperature: -10C to 50C

Holding Force: 250 lbs

3085006.002 Rev. 3 4

Connector Pin Wiring:

Molex 8-Pin Connector Pin Wire Color Description

1 Black Ground (RTN)

2 White Wiegand Data 1 / RS485-A*

3 N/A N/A

4 N/A N/A

5 Red +VDC (12V-24V)

6 Green Wiegand Data 0 / RS485-B*

7 Blue LED Input (RED)

8 Yellow LED Input (GREEN)

Molex 4-Pin Connector Pin

1 Violet Ground (RTN)

2 Pink Tamper/DPS Contact (N.O.) (+)

3 Gray Lock Control Input (5/12/24 VDC)

4 Tan Tamper/DPS Contact (N.O.) (-)

*KS210 model only

LED Function: KS200 and KS210 LED states are controlled and defined by the user’s EAC. Enabling

the red and green LEDs on the KS200 can occur via an active-low (ground) signal or RS485 OSDP

commands (KS210 only)

Output Type: Wiegand TTL (SIAAC-01-1996), OSDP (SIA v.2.1.7)

Regulatory: FCC (ID: VC3-KS210), Industry Canada (ID: 7160A-KS210), CE

BHMA: A156.3, A156.36, A156.25 Compliant

Credentials Supported: 125 kHz Proximity or 13.56 MHz iCLASS, iCLASS Elite, iCLASS SEOS, iCLASS

SE, ISO 15693 ICLASS, ISO 14443A Mifare, Mifare Plus, Desfire SE, Desfire EV1/EV2, NFC,

BLE.

NOTE: Contact HID Global Technical Support at +1 (866)-607-7339 for additional configuration cards

to enable HID iCLASS Elite credentials or mobile credentials via NFC or BLE using HID Mobile

Access application.

System Overview

The KS200 is a radio-frequency identification (RFID) lock for server cabinet installation applications.

The lock is capable of reading RFID credentials and providing that data to an electronic access control

(EAC) system via Wiegand data signaling or via RS485 OSDP (KS210 only). The EAC determines

whether user access should be granted or denied. When the EAC provides an active-high unlock signal

to the lock in the access granted case, the KS200 or KS210 drives a motor to complete the unlock/lock

cycle. EAC indication of user access/denial is provided to the user by way of LED control inputs on the

lock. Additional lock monitoring features (e.g., door position, tamper) are monitored within the lock and

status provided to the EAC.

3085006.002 Rev. 3 5

Installation

1. Installing an SFIC Core

NOTE 1: A key override (SFIC) provides a backup entry method in the rare case the KS200 or EAC

is inactive (Recommended).

NOTE 2: The included SFIC cam has been tested with Medeco and Sargent 6- or 7-pin SFIC cores.

2. Preparing the Cabinet

1. LOCATE the 1” [25 mm] x 6” [150 mm] lock cutout on

the door (some doors may require modification).

2. ENSURE power is available at the rack.

3. RE-USE the existing cam, if possible.

NOTE: One cam is supplied.

CAM CAM LENGTH CAM DEPTH

CAM 1 1-1/2” [38 mm] 15/16” [24 mm]

SFIC

Core

Cam

SFIC

Core

7-pin

6-pin

1. Insert Cam into SFIC

Use the included Spacer

with 6-pin SFICs.

2. INSERT SFIC

into lock

Cam

6-pin

Spacer

3085006.002 Rev. 3 6

3. Installing the Lock

1. SLIDE lock into cutout.

NOTE: (Optional) Install RS485 termination jumper (KS210).

(Optional) The DPS signal is closed when the handle is

resting in its locked position. The DPS circuit can be

extended to include normally open DPS switches

arranged in a series to monitor additional doors and

panels.

DPS Extension Cable

DPS

Switches

(SPST-

NO): As

Needed

Switch #1

(SPST-

NO):

Provided 2. PERFORM the following to

extend the DPS Circuit.

a. REMOVE the DPS jumper.

b. CONNECT the included

DPS extension cable.

c. CONNECT additional

normally-open DPS

switches as shown to

monitor additional panels.

3. CONNECT the female, 10-position Hirose™

connector on the lock side interface cable

to the KS200.

4. ENSURE the lock side interface cable will

properly protrude from the bottom of the

KS200

prior to attaching the rear bracket. ENSURE

the wiring is not obstructing the mounting

holes prior to securing the rear bracket.

3085006.002 Rev. 3 7

4. Installing the Handing Selector

CAUTION! Inserting/snapping the handle all the way in will lock the lever

2. POSITION the arrows to

point toward the door

edge.

1. INSERT handing

selector into lock.

6. ENSURE that the lock is fully

secured and flush to the mounting

surface in order to depress

tamper switch on back of device

for correct operation.

NOTE: If the tamper switch is

not fully depressed, the

lock opens the

Tamper/DPS+/- contact.

5. ATTACH rear bracket with screws.

7. IF the tamper switch is not fully

closed,

THEN REMOVE the tamper

contact,

AND ENSURE the lock is closed.

3. INSERT and SECURE

cam with screw.

Door edge

Tamper

Switch

3085006.002 Rev. 3 8

5. Attaching the Wiring

New 4-/8-Pin Molex

Integrated Wiegand: KS200/KS210 Cabinet Locks, ElectroLynx Wire Color/Function Assignments

Connector 8-Pin Molex Connector 4-Pin Molex Connector

Pin/Wire

Color 1

Black 2

White 3

N/A 4

N/A 5

Red 6

Green 7

Blue 8

Yellow 1

Violet 2

Pink 3

Gray 4

Tan

Function 12 VDC

Reader Wiegand

Data N/A N/A 12 VDC

Reader Wiegand

Data LED 12/24

VDC/

Lock

Tamper/

DPS

12/24

VDC/

Lock

Tamper/

DPS

Setting NEG Data 1 /

RS485-

A* N/A N/A POS Data 0 /

RS485-

B* RED Green COM, - NC, + COM, + COM, -

*KS210 models only

Legacy 10-Pin Molex to 4-/8-Pin Molex

Integrated Wiegand: KS200/KS210 Cabinet Locks, ElectroLynx Wire Color/Function Assignments

Connector 8-Pin Molex Connector 4-Pin Molex Connector

Pin/Wire

Color 1

Black 2

White 3

N/A 4

N/A 5

Red 6

Green 7

Orange 8

Brown 1

Gray 2

Yellow 3

Violet 4

Blue

Function 12 VDC

Reader Wiegand

Data N/A N/A 12 VDC

Reader Wiegand

Data LED 12/24

VDC/

Lock

Tamper/

DPS

12/24

VDC/

Lock

Tamper/

DPS

Setting NEG Data 1 /

RS485-

A* N/A N/A POS Data 0 /

RS485-

B* RED Green COM, - NC, + COM, + COM, -

*KS210 models only

1. CONNECT the Lock Side Interface Cable to the lock.

2. CONNECT the Lock Side Interface Cable to the optional System Side Interface Cable (see

Connector and Cable Diagram).

3. RUN the System Side Interface Cable, as required (see Server Cabinet Wiring Example).

4. ATTACH the included 4-Pin and 8-Pin Molex Female Connectors to the bare wire side of the

System Side Interface Cable.

NOTE: It is recommended that 10-conductor, 24 AWG, cable be used.

5. ENSURE the following power cabling guidelines are followed:

Wire AWG Supply Voltage Allowed Cable Length (ft.)*

20 AWG 12 419

24 3217

22 AWG 12 264

24 2023

24 AWG 12 166

24 1272

3085006.002 Rev. 3 9

* Round trip loss. V = 2 x I x R x xft xft = V / (2 x I x R)

Note: Data 0 and Data 1 wires for Wiegand may be reused for OSDP. However, standard Wiegand cable may not

meet RS485 twisted pair recommendations for maximum data transmission speed and distance.

Note: For OSDP cable lengths greater than 200 ft (61 m) or EMF interference, install 120Ω termination resistor

jumper on the KS210.

3085006.002 Rev. 3 10

Connector and Cable Diagram

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cerrar de Assa Abloy

Assa Abloy

Assa Abloy ALARM CONTROLS Magnalock 1200DE Delayed... Manual

Assa Abloy

Assa Abloy Yale nexTouch NTM 610 Instrucciones de montaje

Assa Abloy

Assa Abloy eCLIQ Manual de usuario

Assa Abloy

Assa Abloy Corbin Russwin CL3100 Series Manual de usuario

Assa Abloy

Assa Abloy Yale Smart Latch Manual de usuario

Assa Abloy

Assa Abloy Yale Real Living Assure Lock SL YRD256 Especificaciones técnicas

Assa Abloy

Assa Abloy MGL-01500ALS Series Manual de usuario

Assa Abloy

Assa Abloy Yale Smart Latch Manual de usuario

Assa Abloy

Assa Abloy HES 660 Manual de usuario

Assa Abloy

Assa Abloy Yale 7370 Series Manual de usuario

Assa Abloy

Assa Abloy Sargent L980S Manual de usuario

Assa Abloy

Assa Abloy Sargent KP Series Manual de instalación

Assa Abloy

Assa Abloy ML53PA Manual de usuario

Assa Abloy

Assa Abloy EL580 Manual de usuario

Assa Abloy

Assa Abloy Securitron EPT-SC Series Manual de usuario

Assa Abloy

Assa Abloy INTERLOCK P84166 Manual de usuario

Assa Abloy

Assa Abloy 836S Manual de usuario

Assa Abloy

Assa Abloy OneSystem 819N Guía de instalación

Assa Abloy

Assa Abloy Corbin Russwin BLSS ML2000 Series Manual de usuario

Assa Abloy

Assa Abloy YRD256 Manual de usuario

Assa Abloy

Assa Abloy effeff EX118R Manual de usuario

Assa Abloy

Assa Abloy EMTEK EMPowered Motorized Smart Lock Upgrade... Manual de usuario

Assa Abloy

Assa Abloy SARGENT 115 Hospital Latch Manual de usuario

Assa Abloy

Assa Abloy Yale YDD424A Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario