ASROCK K7VT6-C Manual de usuario

ASRock K7VT6-C Motherboard

EnglishEnglish

English

No part of this installation guide may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for

identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this guide are furnished for informational

use only and subject to change without notice, and should not be constructed as a

commitment by ASRock. ASRock assumes no responsibility for any errors or

omissions that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any

kind, either expressed or implied, including but not limited to the implied warranties or

conditions of merchantability or fitness for a particular purpose.

In no event shall ASRock, its directors, officers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of profits, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the guide or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

ASRock Website: http://www.asrock.com

PublishedDecember 2004

2ASRock K7VT6-C Motherboard

EnglishEnglish

English

Motherboard LMotherboard L

Motherboard Layoutayout

ayoutayout

ayout

1 PS2_USB_PWR1 Jumper 14 System Panel Connector (PANEL1)

2 CPU Fan Connector (CPU_FAN1) 15 Chassis Speaker Connector (SPEAKER1)

3 CPU Socket 16 Floppy Connector (FLOPPY1)

4 North Bridge Controller 17 Internal Audio Connector: CD1 (Black)

5 184-pin DDR DIMM Slots (DDR1- 2) 18 Internal Audio Connector: AUX1 (White)

6 ATX Power Connector (ATXPWR1) 19 Clear CMOS Jumper (CLRCMOS2)

7 Secondary IDE Connector (IDE2, Black) 20 JR1 / JL1 Jumpers

8 Primary IDE Connector (IDE1, Blue) 21 Front Panel Audio Connector (AUDIO1)

9 AGP Slot (1.5V_AGP1) 22 PCI Slots (PCI1- 5)

10 FSB Select Jumpers 23 Game Port Connector (GAME1)

(FSB_SEL0,FSB_SEL1, FSB_SEL2) 24 Flash Memory

11 South Bridge Controller 25 Shared USB 2.0 Header (JUSB45, Blue)

12 Power LED Connector (PWR_LED1) 26 J1 Jumper (FID0, FID1, FID2, FID3, FID4)

13 Chassis Fan Connector (CHA_FAN1)

ASRock K7VT6-C Motherboard

EnglishEnglish

English

ASRock I/O PlusASRock I/O Plus

ASRock I/O PlusTMTM

TMTM

1 Parallel Port 7 2 x USB 2.0 Port (USB0, USB1)

2 RJ-45 Port 8 2 x USB 2.0 Port (USB2, USB3)

3 Line In (Light Blue) 9 Serial Port: COM1

4 Line Out (Lime) 10 PS/2 Keyboard Port (Purple)

5 Microphone (Pink) 11 PS/2 Mouse Port (Green)

6 2 x Shared USB 2.0 Port (USB4, USB5)

4ASRock K7VT6-C Motherboard

1.1.

1. IntroductionIntroduction

IntroductionIntroduction

Introduction

Thank you for purchasing ASRock K7VT6-C motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-

step installation guide. More detailed information of the motherboard can be found in

the user manual presented in the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available onASRock website without further notice. You

may find the latest memory and CPU support lists on ASRock website

as well.

ASRock website http://www.asrock.com

1.11.1

1.1 Package ContentsPackage Contents

Package ContentsPackage Contents

Package Contents

1 x ASRock K7VT6-C Motherboard

(ATX Form Factor: 12.0-in x 7.0-in, 30.5 cm x 17.8 cm)

1 x ASRock K7VT6-C Quick InstallationGuide

1 x ASRock K7VT6-C Support CD

1 x Ultra ATA 66/100/133 IDE Ribbon Cable (80-conductor)

1 x 3.5-in Floppy Drive Ribbon Cable

1 xASRock I/O PlusTM Shield

EnglishEnglish

English

ASRock K7VT6-C Motherboard

EnglishEnglish

English

1.21.2

1.2 SpecificationsSpecifications

SpecificationsSpecifications

Specifications

Platform: ATX Form Factor: 12.0-in x 7.0-in, 30.5 cm x 17.8 cm

CPU: Supports Socket A (462 pins) for

AMDAthlonTM / AthlonTM XP / DuronTM/ SempronTM processor

Chipsets: North Bridge:

VIA KT600, FSB@200 / 266 / 333 / 400 MHz

South Bridge:

VIAVT8235CE, Supports USB 2.0, ATA 133

Memory: 2DDRDIMMSlots:DDR1andDDR2

PC3200 (DDR400) for 1DDRDIMM slot, Max. 1GB

PC2700(DDR333)/PC2100(DDR266)for2DDRDIMMslots,

Max. 2GB

IDE: IDE1:ATA133 / UltraDMA Mode 6

IDE2:ATA133 / UltraDMA Mode 6

Supports up to 4 IDE Devices

Floppy Port: Supports up to 2 Floppy Disk Drives

Audio: 5.1 Channels AC’97 Audio

LAN: Speed: 802.3u (10/100 Ethernet), Supports Wake-On-LAN

Hardware Monitor: CPU Temperature Sensing

Motherboard Temperature Sensing

CPU Overheat Shutdown to Protect CPU Life

(ASRock U-COP)(see CAUTION 1)

CPU Fan Tachometer

Chassis Fan Tachometer

Voltage Monitoring: +12V, +5V, +3.3V, Vcore

PCI slots: 5 Slots with PCI Specification 2.2

AGP slot: 1AGP Slot, Supports 1.5V, 8X/4XAGPCard (see CAUTION 2)

USB 2.0: 6 USB 2.0 ports:

include 6 ready-to-use USB 2.0 ports on the rear panel,

(see CAUTION 3)

ASRock I/O PlusTM:1 PS/2 Mouse Port, 1 PS/2 Keyboard Port,

1 Serial Port: COM1,

1 Parallel Port (ECP/EPP Support)

6 ready-to-use USB 2.0 Ports,

1 RJ-45 Port,

Audio Jack: Line In / Line Out / Microphone

6ASRock K7VT6-C Motherboard

EnglishEnglish

English

BIOS: AMI legal BIOS, Supports “Plug and Play”,

ACPI 1.1 Compliance Wake-Up Events,

SMBIOS 2.3.1 Support,

CPU Frequency Stepless Control

(only for advanced users’ reference, see CAUTION 4)

OS: Microsoft® Windows® 98 SE / ME / 2000 / XP Compliant

CAUTION!

1. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC system.

2. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!

It may cause permanent damage!

3. Power Management for USB 2.0 works fine under Microsoft®Windows®

XP SP1/2000 SP4. It may not work properly under Microsoft®Windows®

98/ME.

4. Although this motherboard offers stepless control, it is not recommended

to perform over clocking. Frequencies other than the recommended CPU

bus frequencies may cause the instability of the system or damage the

CPU. The CPU host frequency of this motherboard is determined by

jumper-setting. You must adjust “FSB Select Jumpers” according to the

FSB of your AMD CPU before you set the “CPU Host Frequency” con-

figuration as “Manual” in BIOS. See page 9 for the details of “FSB Select

Jumpers” adjustment, and page 22 of “User Manual” in the Support CD for

“CPU Host Frequency” configuration.

ASRock K7VT6-C Motherboard

2.2.

2. InstallationInstallation

InstallationInstallation

Installation

Pre-installation PrecautionsPre-installation Precautions

Pre-installation Precautions

Take note of the following precautions before you install mother-

board components or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any

component. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

2. To avoid damaging the motherboard components due to static

electricity, NEVER place your motherboard directly on the car-

pet or the like. Also remember to use a grounded wrist strap or

touch a safety grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a

grounded antstatic pad or in the bag that comes with the

component.

5. When placing screws into the screw holes to secure the

motherboardtothe chassis, please do notover-tighten the screws!

Doing so may damage the motherboard.

2.12.1

2.1 CPU InstallationCPU Installation

CPU InstallationCPU Installation

CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90° angle.

Step 2. Position the CPU directly above the socket such that its marked corner

matches the base of the socket lever.

Step 3. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU

into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it firmly on the socket while you push

down the socket lever to secure the CPU. The lever clicks on the side tab

to indicate that it is locked.

Step 5. Install CPU fan and heatsink. For proper installation, please kindly refer to

the instruction manuals of your CPU fan and heatsink vendors.

EnglishEnglish

English

8ASRock K7VT6-C Motherboard

2.22.2

2.2 Installation of Memory Modules (DIMM)Installation of Memory Modules (DIMM)

Installation of Memory Modules (DIMM)Installation of Memory Modules (DIMM)

Installation of Memory Modules (DIMM)

K7VT6-C motherboard provides two 184-pinDDR (Double Data Rate) DIMM slots.

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock aDIMM slot by pressing the retaining clips outward.

Step 2. Align aDIMM on the slot such that the notch on theDIMM matches the break

on the slot.

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the

slot at incorrect orientation.

Step 3. Firmly insert theDIMM into the slot until the retaining clips at both ends fully

snap back in place and theDIMM is properly seated.

EnglishEnglish

English

ASRock K7VT6-C Motherboard

2.3 Expansion Slots (PCI and AGP Slots)2.3 Expansion Slots (PCI and AGP Slots)

2.3 Expansion Slots (PCI and AGP Slots)

There are 5 PCI slots and 1 AGP slot on K7VT6-C motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

AGP slot: TheAGP slot is used to install a graphics card. TheASRockAGP slot has

a special design of clasp that can securely fasten the inserted graphics

card.

Please do NOT use a 3.3VAGP card on theAGPslot of this motherboard!

It may cause permanent damage! For the voltage information of your

graphics card, please check with the graphics card vendors.

Installing an expansion cardInstalling an expansion card

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the bracket facing the slot that you intend to use. Keep the screw

for later use.

Step 3. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 4. Fasten the card to the chassis with screws.

2.4 Jumpers Setup2.4 Jumpers Setup

2.4 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap

is placed on the pins, the jumper is “Open”.

The illustration shows a 3-pin jumper whose

pin1 and pin2 are “Short” when jumper cap

is placed on these 2 pins.

Jumper Setting

FSB Select Jumpers

(FSB_SEL0,

FSB_SEL1,

FSB_SEL2)

(see p.2item 10)

Note: The CPU FSB frequency of this motherboard is determined by jumper-setting. You must

adjust “FSB Select Jumpers” according to the FSB of your AMD CPU. Please follow the

figures above to set the CPU FSB frequency.

Short Open

EnglishEnglish

English

1010

10 ASRock K7VT6-C Motherboard

PS2_USB_PWR1 Short pin2, pin3 to enable

(seep.2 item 1) +5VSB (standby) for PS/2 or

USB wake up events.

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power

supply.

JR1 / JL1 Jumpers

(seep.2item20)

Note: If JR1 and JL1 Jumpers are short, both the front panel and the rear panel audio

connectors can work.

Clear CMOS Jumper

(CLRCMOS2)

(seep.2item19)

Note: CLRCMOS2 allows you to clear the data in CMOS. The data in CMOS includes system

setup information such as system password, date, time, and system setup parameters. To

clear and reset the system parameters to default setup, please turn off the computer and

unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper

cap to short the Clear CMOS jumper for 5 seconds. After shorting the Clear CMOS jumper,

please remove the jumper cap. However, please do not clear the CMOS right after you

update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS,

you must boot up the system first, and then shut it down before you do the clear-CMOS

action.

J1 Jumper

(FID0, FID1, FID2, FID3, FID4)

(seep.2item26)

Note: The set of J1 Jumper allows users to adjust the multiplier of CPU. See page 14 of User

Manual in the Support CD for details. However, the system will work well without the

adjustment of multiplier. You do not have to adjust the multiplier for normal usage.

2-pin jumper

EnglishEnglish

English

Otros manuales para K7VT6-C

Tabla de contenidos

Idiomas:

Otros manuales de Placa madre de ASROCK

ASROCK

ASROCK Z690 Phantom Gaming 4 Manual de usuario

ASROCK

ASROCK M3A UCC - Manual de usuario

ASROCK

ASROCK P43D1600TWINS Manual de usuario

ASROCK

ASROCK K7S41GX2 Manual de usuario

ASROCK

ASROCK 770iCafe Manual de usuario

ASROCK

ASROCK H87E-ITX/ac Manual de usuario

ASROCK

ASROCK P55DE PRO - Manual de usuario

ASROCK

ASROCK A790GX 128M - V1.0 Manual de usuario

ASROCK

ASROCK H55 PRO - V1.0 Manual de usuario

ASROCK

ASROCK K8NF4G-VSTA Manual de usuario

ASROCK

ASROCK P55 DELUXE - V1.1 Manual de usuario

ASROCK

ASROCK Q170M vPro+ Manual de usuario

ASROCK

ASROCK Z97M OC Formula Manual de usuario

ASROCK

ASROCK H97M Anniversary Manual de usuario

ASROCK

ASROCK P67 TRANSFORMER - Manual de usuario

ASROCK

ASROCK G41C-GS Manual de usuario

ASROCK

ASROCK H61M-VS R2.0 Manual de usuario

ASROCK

ASROCK IMB-A1300 Manual de servicio

ASROCK

ASROCK Z390M Pro4 Manual de usuario

ASROCK

ASROCK D1541D4U Series Manual de usuario

ASROCK

ASROCK 880GMH USB3 R2.0 Manual de usuario

ASROCK

ASROCK X99 Extreme6/3.1 Manual de usuario

ASROCK

ASROCK WOLFDALE1333-DVI Manual de usuario

ASROCK

ASROCK Z97 OC Formula Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario