ASI UT40II2 Manual de usuario


i
Preface
Copyright 2013
All Rights Reserved.
The information in this document is subject to change
without prior notice in order to improve reliability, design
and function and does not represent a commitment on
the part of the manufacturer.
In no event will the manufacturer be liable for direct,
indirect, special, incidental, or consequential damages
arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such
damages.
This document contains proprietary information
protected by copyright. All rights are reserved. No part
of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior
written permission of the manufacturer.
Limitation of Liability
While reasonable efforts have been made to ensure the
accuracy of this manual, the manufacturer and
distributor assume no liability resulting from errors or
omissions in this manual, or from the use of the
information contained herein.
Conventions of This Manual
Use this manual will help you get the most from your
computer.
If you are an experienced user of computers and/or
Microsoft’s Windows operating systems, you might find
it useful to read the Quick Start Guide that comes along
with your accessories.

ii
If you are a less experienced user, you should go
through the manual carefully before using your system.
Whether or not you are an experienced user, you
should consult the Troubleshooting Chapter if you
encounter any problems with your computer.

iii
Table of Content
Things you must remember before working on your computer 10
Welcome to your Ultrabook .......................................................................... 13
Front View 13
Right View 15
Left View 16
Basic Layout 19
Basic function 19
Connecting to a Power Source ...................................................................
Powering up the Ultrabook Computer .................................................... 3
LCD Care 24
Turning wireless devices on or off 24
Using a WLAN 24
Using Bluetooth wireless devices 25
External cards and devices ........................................................................... 5
Universal Serial Bus 3.0 (USB) ..................................................................... 8
Removing a USB device 28
Hot Key Controls................................................................................................. 31
Entering the BIOS Setup Screen 34
Leaving the BIOS Setup Screen 34
BIOS Action Keys 34
Modifying the BIOS Settings ........................................................................ 35
Main Setup 36
Intel Rapid Storage Technology 39
Adding users, changing settings ................................................................ 47
Functions 47
Screen 48

iv
Keyboard 49
Turning the machine off ................................................................................. 50
Checking Cables and Connections ............................................................. 5
Detailed Specifications .................................................................................... 55

1

2
This section is designed to assist you in identifying
potentially unsafe conditions while working with this
product. Required safety features have been installed in
the computer to protect you from injury. However, you
should use good judgment to identify potential safety
hazards:
Please read these safety instructions carefully.
1.
Please keep this User's Manual for later reference.
2.
Please disconnect this equipment from AC outlet
before cleaning. Don't use liquid or sprayed
detergent for cleaning. Use moisture sheet or cloth
for cleaning.
3.
For pluggable equipment, that the socket-outlet
shall be installed near the equipment and shall be
easily accessible.
4.
Please keep this equipment from humidity.
5.
Lay this equipment on a reliable surface when
installed. A drop or fall could cause injury.
6.
Make sure to use the right voltage for the power
source when connecting the equipment to the
power outlet.
7.
Place the power cord in such a way that people can
not step on it. Do not place anything on top of the
power cord.
8.
All cautions and warnings on the equipment should
be noted.
9.
If the equipment is not used for a long time,
disconnect the equipment from the main power
outlet to avoid being damaged by transient
overvoltage.
10.
Never pour any liquid into the opening, this could
cause fire or electrical shock.

3
11.
Never open the equipment. For safety reasons, the
equipment should only be opened by a qualified
service personnel.
12.
If on the following situation arises, get the
equipment checked by a service personnel:
The Power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to
moisture.
The equipment has not worked well or you
cannot get it work according to the user's
manual.
The equipment has dropped and damaged.
If the equipment has obvious signs of
breakage.
13.
Do not leave this equipment in an environment
unconditioned, storage temperature above 60°C
(140°f), it may damage the equipment.
14.
The unit can be operated at an ambient temperature
of max. 5°C ~ 35°C.
15.
The sound pressure level of the operator's position
according to IEC 704-1: 1982 is equal or less than
70 dB(A).
16.
Power Cord Requirements
The power cord set used with the AC adaptor must
meet the requirements of the country where you use
the AC adaptor, whether it is 100-240 Vac. The
following information explains the requirements for
power cord set selection.
17.
The cor
d set must be approved by the country in
which it is used.

4
18.
The appliance coupler must have a configuration for
mating with
a CEE7/EN60320/IEC 320/NEMA/ JIS C
8303 appliance inlet.
For U.S. and Canada:
The cord set must be UL Listed and CSA Certified.
The minimum specifications for the flexible cord are
No. 18 AWG, (2) Type SPT-2, and (3) 2-conductor.
For Japan:
All components of the cord set must bear a “PSE”
mark and in accordance with the Japanese Dentori
Law.
The minimum specifications for the flexible cord
are .75m ㎡conductors, (2) Type VCTR or VCTFK,
and (3) 2-conductor.
The cord set must have minimum rated current
capacity of 7 A.
The attachment plug must be a two-pole, grounded
type with a Japanese Industrial Standard C8303 (15
A, 125 VAC) configuration.
For Other Countries:
The cord set fittings must bear the certification mark
of the agency responsible for evaluation in a
specific country.
The flexible cord must be of a HAR (harmonized)
type H03VVH2-F.
The cord set must have a current capacity of a least
2.5 Amperes and voltage rating of 125 or 250 Vac.
MODEL UT40IIx (X=0~9) IS DESIGNED TO USE
WITH THE FLLOWING AC ADAPTER MODEL ONLY 40W
ADP:

5
Automatics Voltage adjustment between 100 and
240VAC 50/60Hz,LV5, 19V, 40 Watts, 2 Pin
Delta type: 19V/2.1A, ADP-40PH AB.
Huntkey type: 19V/2.1A, HKA03619021-8C
Automatics Voltage adjustment between 100 and
240VAC 50/60Hz,LV5, 19V, 40 Watts, 3 Pin
Delta type: 19V/2.1A, ADP-40PH BB
19.
When using your telephone equipment, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons.
These precautions include the following:
20.
Do not use this product near water, for example,
near a bathtub, washbowl, kitchen sink or laundry
tub, in a wet basement or near a swimming pool.
21.
Use only the power cord and batteries indicated in
this manual. Do not dispose of batteries in a fire.
They may explode. Check with local codes for
possible special instructions.
22.
Do not use the AC adapter near open water or other
liquids. Never spill liquid into the AC adapter.
23.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of
used batteries according to the manufacturer's
instructions. Never remove the battery pack while
the power is on as this may result in data loss when
the system loses power.
24.
The input receptacle is used as the main
disconnecting device.
25.
Be sure to unplug the AC adapter or remove the
power supply before repairing or changing the
battery by an experienced technician.
Tabla de contenidos
Otros manuales de Computadora portátil de ASI



















