AS WL-530gV2 Manual de usuario
User Manual
Pocket Wireless Router
E4265 / October 2008
WL-530gV2
(For 802.11g/b Wireless Clients)
®
Manufacturer Contact Information
ASUSTeK COMPUTER INC. (Asia-Pacic)
Company address: 15 Li-Te Road, Beitou, Taipei 11259
Telephone: +886-2-2894-3447
Fax: +886-2-2890-7798
Web site: http://www.asus.com.tw
ASUS COMPUTER INTERNATIONAL (America)
Company address: 800 Corporate Way, Fremont, CA 94539, USA
General (tel): +1-510-739-3777
General (fax): +1-510-608-4555
Web site address: http://usa.asus.com
Technical support
General support: +1-502-995-0883
Support (fax): +1-502-933-8713
Online support: http://vip.asus.com/eservice/techserv.aspx
ASUS COMPUTER GmbH (Germany & Austria)
Company address: Harkortstr. 21-23, 40880 Ratingen, Germany
General (tel): +49-02102-95990
General (fax): +49-02102-959911
Web site address: http://www.asuscom.de
Online contact: http://www.asuscom.de/sales
Technical support
Components: +49-02102-95990
Fax: +49-02102-959911
Online support: http://vip.asus.com/eservice/techserv.aspx?SLanguage=de-de
Global service center: http://support.asus.com/service/service.aspx?SLanguage=en-
us
FAQ: http://support.asus.com/faq/faq.aspx?SLanguage=en-us
Online technical support: http://support.asus.com/techserv/techserv.
aspx?SLanguage=en-us
WL-530gV2 Pocket Wireless Router User Manual
1
Table of contents
Specications summary ..........................................................................2
1. Package contents ................................................................................3
2. Connecting ADSL modem and wireless router.................................3
1) Cable connection ...............................................................................3
2) Status indicators ................................................................................4
3. Getting started .....................................................................................5
1) Wired connection ...............................................................................5
2) Wireless connection...........................................................................5
3) Setting IP addresses for wired or wireless clients .............................5
4) Conguring the Wireless Router........................................................6
5) Quick setup .......................................................................................7
4. Wireless router features.................................................................... 11
1) Setting up wireless encryption ........................................................ 11
2) Setting up virtual server in your LAN ...............................................12
3) Setting up virtual DMZ in your LAN .................................................13
4) Setting up DDNS .............................................................................13
5. Setting up using ASUS utility................................................................ 17
1) Utility Installation for WL-530gV2.....................................................17
2) Device Discovery .............................................................................18
3) Firmware Restoration ......................................................................19
6. Troubleshooting.................................................................................20
7. Appendix.............................................................................................22
WL-530gV2 Pocket Wireless Router User Manual
2
WAN 1 x RJ-45 10/100Mbps port for 10/100 BaseT
Supports both Ethernet and 802.3
Supports the auto-crossover function (MDI-X)
LAN 4 x RJ-45 10/100Mbps ports for 10/100 BaseT
Support both Ethernet and 802.3
Support the auto-crossover function (MDI-X)
Protocol Network: TCP/IP, DHCP Server and Client, PPPoE,
NAT, ICMP, UDP
Routing: Static Routes, NAT (one-to-many)
Management Remote management
Save/Restore conguration les and upgrade via web
browser
Device discovery: Discover all ASUS routers in a
network and help users enter web pages.
Firmware Restoration Utility: Restore your device after
a rmware upgrade fails.
Network protocol DHCP Server, WAN DHCP Client
Enable/Disable accessing router’s UI from WAN
Static WAN IP support
NTP support
Reset button Press this button for 5 seconds to restore the default
factory settings
Applications UPnP, Exposed Host (DMZ), Port Range Forwarding
Firewall NAT and SPI
Operating frequency 2.4-2.5GHz
Data rate 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11b: 1, 2, 5.5, 11Mbps
Range Indoor 130ft (40m), outdoor (LOS, Light-of-Sight) 330ft
(100m) at 11Mbps
Indoor 80ft (25m), outdoor (LOS, Light-of-Sight) 200ft
(60m) at 54Mbps
Output power 12-15 dBm
Wireless security 64/128-bit WEP, WPA-PSK, WPA2-PSK
Other security Logging: dropped packet, security event, syslog
Filtering: port, IP packet, URL key word
Access Control List
Power AC Input: 100V-240V (50-60Hz)
DC Output: 5V with max. 2A
Dimensions 129mm (L) x 44mm (W) x 29mm (H)
* All specications are subject to change without notice.
Specications summary
WL-530gV2 Pocket Wireless Router User Manual
3
2. Connecting ADSL modem and wireless router
1. Package contents
• WL-530gV2 Pocket Wireless Router x1
• Power adapter x1
• Support CD x1
• RJ45 cable x1
• Quick Start Guide x1
• Warranty card x1
1) Cable connection
1
Modem
Wall Telephone Outlet
Wall Power Outlet
Phone
Power
2
Wall Power Outlet
ASUS Wireless Router
ASUS Wireless Router
3
Modem
Wall Telephone Outlet
Wall Power Outlet
Phone
Power
Power
LAN
Power
WAN
LAN
Note:
• Use only the power adapter included in the package. Using other power adapters
may damage the device.
• Illustrations are for reference only. Refer to the package for the real device.
If any of the above items is damaged or missing, contact your retailer immediately.
WL-530gV2 Pocket Wireless Router User Manual
4
2) Status indicators
POWER
AIR
ETHERNET
POWER
Off No power
On System ready
Flashing Reset to the default mode
AIR (Wireless Network)
Off No power
On Wireless system ready
Flashing Transmitting or receiving wireless data
ETHERNET
Off No power or no physical connection
On Has physical connection to an Ethernet network
Flashing Transmitting or receiving data through an Ethernet cable
WL-530gV2 Pocket Wireless Router User Manual
5
The ASUS WL-530gV2 Pocket Wireless Router meets various working scenarios with proper
conguration. The default settings of the wireless router may change to meet your individual
needs. Thus, before using the wireless router, check the basic settings to ensure that they all
work in your environment.
Note: We recommend wired connection for the initial conguration to avoid possible
setup problems due to wireless uncertainty.
1) Wired connection
An Ethernet cable is bundled with your WL-530gV2 package. The wireless router has an
integrated auto-crossover function. Use either a straight-through or a crossover cable for
wired connection. Plug one end of the cable to the LAN port at the rear panel of the router
and the other end to the Ethernet port on your PC.
2) Wireless connection
For establishing wireless connection, you need an IEEE 802.11g/b compatible WLAN card.
Refer to the user manual of your WLAN card for the wireless connection procedures. By
default, the SSID of the wireless router is “default” (in lower case), encryption is disabled, and
open system authentication is used.
3) Setting IP addresses for wired or wireless clients
To access the WL-530gV2 Pocket Wireless Router, you must have the correct TCP/IP
settings on your wired or wireless clients. Set the IP addresses of the clients within the same
subnet of WL-530gV2.
Getting an IP address automatically
The WL-530gV2 Pocket Wireless Router integrates the DHCP server functions, thus, your
PC gets an IP address automatically.
Note: Before rebooting your PC, switch ON the
wireless router and ensure that the router is ready.
Assigning an IP address manually
To manually assign an IP address, you need to know the
default settings of WL-530gV2:
• IP address: 192.168.1.1
• Subnet Mask: 255.255.255.0
3. Getting started
WL-530gV2 Pocket Wireless Router User Manual
6
To set up a connection with a manually assigned IP
address, the address of your PC and the wireless
router must be within the same subnet:
• IP address: 192.168.1.xxx (xxx can be any
number between 2 and 254. Ensure that the IP
address is not used by another device.)
• Subnet Mask: 255.255.255.0 (same as WL-
530gV2)
• Gateway: 192.168.1.1 (IP address of WL-
530gV2)
• DNS: 192.168.1.1 (WL-530gV2), or assign a
known DNS server in your network.
Default settings
User name: admin Password: admin
Key in the following address in the
address bar of your web browser:
192.168.1.1
After logging in, the ASUS Wireless Router home page is displayed.
The homepage displays quick links to congure the main features of the wireless router.
1
2
4) Conguring the Wireless Router
Follow the steps below to enter the web conguration interface of WL-530gV2.
3
WL-530gV2 Pocket Wireless Router User Manual
7
1. Select your time zone and click Next.
5) Quick setup
To start the quick setup, click Next to enter the Quick Setup page.
Follow the instructions below to set up your WL-530gV2.
2. The ASUS wireless router supports three
types of ISP services: cable, PPPoE, and
static WAN IP. Select your connection type
and click Next to continue.
Cable or dynamic IP user
If you are using services provided by
cable ISP, select Cable Modem or other
connection that gets IP automatically. If
your ISP provides you with the host name,
the MAC address, and the heartbeat
server address, ll these information into
the boxes on the setting page; if not, click
Next to skip this step.
PPPoE user
If you are using PPPoE services, select
ADSL connection that requires
username and password. It is known as
PPPoE. You need to key in the username
and password provided by your ISP. Click
Next to continue.
WL-530gV2 Pocket Wireless Router User Manual
8
Static IP user
If you are using ADSL or other connection
type that uses static IP address, select
ADSL or other connection type that
uses static IP address. Key in the
IP address, subnet mask, and default
gateway provided by your ISP. You
can specify DNS servers, or get DNS
information automatically.
3. After the connection type setting is
completed, set up your wireless interface.
Specify to your wireless router an
SSID (Service Set Identier), which is
a unique identier attached to packets
sent over WLAN. This identier emulates
a password when a device attempts to
communicate with your wireless router via
WLAN.
If you want to protect transmitted data, select either of the Security Level below to enable
the encryption methods:
Medium: Only users with the same WEP key settings can connect to your wireless router
and transmit data using the 64bits or 128bits WEP key encryption.
High: Only users with the same WPA pre-shared key settings can connect to your wireless
router and transmit data using the TKIP or AES encryption.
4. Key in four sets of WEP keys in the WEP
Key elds (10 hexadecimal digits for WEP
64bits, 26 hexadecimal digits for WEP
128bits). For system-generated keys,
key in a Passphrase. Take note of the
Passphrase and WEP keys, then click
Finish.
For example, if you select the WEP
64bits encryption mode and key in 11111
as the Passphrase, the WEP Keys are
generated automatically.
6. To connect the wireless router from a wireless client, you can use Windows®Wireless
Zero Conguration service to set up the connection. If you use an ASUS WLAN card on
your computer, you can use the One Touch Wizard utility supplied in the WLAN Card
Support CD for wireless connection.
5. Click Save&Restart to restart the wireless
router and activate the new settings.
Only ASUS WLAN cards support the
Passphrase function.
Tabla de contenidos
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad