Arvio E-maxx Manual de usuario

www.arvio.com.au suppo[email protected] Ph +613 98371050 V5.2 31/8/2018

E-Maxx

THE INSTALLATION GUIDE

INTRODUCTION.......................................................................................................1

SYSTEM DIAGRAM..................................................................................................2

SAFETY....................................................................................................................2

MODELS...................................................................................................................2

UNPACKING & INSPECTION...................................................................................3

MOUNTING...............................................................................................................3

WIRING.....................................................................................................................4

OPERATION.............................................................................................................5

SETUP FOR ALL USER TYPES...............................................................................5

SETUP FOR INSTALLERS & OWNERS...................................................................7

SP PRO PROGRAMMING........................................................................................8

SP PRO ACCESS VIA OPENHAB............................................................................8

SP PRO PROGRAMMING SPECIAL FEATURES.....................................................9

BROWSER VIEW - www.myarvio.com.au...............................................................10

CREATING GRAPHS..............................................................................................10

SETTINGS..............................................................................................................10

SELECTRONIC SP PRO SETTINGS..............................................................................10

GENERIC SETTINGS......................................................................................................11

DEVICES SETTING - NAMING AND VIEWING A SITE .................................................11

SITE ACCESS - CREATING USERS..............................................................................12

ON GOING FEES....................................................................................................13

SECURITY & PRIVACY..........................................................................................14

TROUBLE SHOOTING ...........................................................................................14

SPECIFICATIONS...................................................................................................15

DISCLAIMER ..........................................................................................................16

TERMS & CONDITIONS.........................................................................................16

NOTES....................................................................................................................20

INTRODUCTION

The E-Maxx is a microcontroller for remote monitoring, controlling and configuration

of Selectronic Inverters (SP PRO series 1 or 2).

E-Maxx enables the connection of up to three SP PRO inverters to the internet and

makes them available via an app.

There are four main functions:

1. App. based viewing access via Android or Apple smart devices

2. Generator remote start

3. Remote control of SP PRO outputs

4. Remote programming via SP LINK

The E-Maxx operates without any custom setup of the internet router and reports via

a publicly available app called OpenHAB.

When purchasing an E-Maxx, you need to specify a 1, 2 or 3 phase unit (E-Maxx 1,

E-Maxx 2 or E-Maxx 3) and which power supply option you prefer. Power supply

options are via a 240VAC to 5VDC plug pack or a 12VDC to 5VDC adaptor which

can be powered from the SP PRO’s 12VDC internal supply. Older SP PRO inverters

can be connected with the approved RS232 to USB adaptor from Aten, model US-

232A.

The unit can be configured by the user directly without assistance from the installer

if:

1. The plug pack option is selected (as the SP PRO does not need to be

opened).

2. The customer can proficiently use the www.myarvio.com.au web page and

the relevant app store to set up their account and download and install the

OpenHAB app.

3. An RJ45 internet connection is available near the inverter.

If a hardwired connection is not available, alternate network extender connections

should also work such as EOP (Ethernet Over Power) modem pairs or Ethernet to

WIFI extenders. Arvio cannot assist with ethernet reliability issues associated with

third party ethernet extenders, please choose reputable brands and ensure that they

are reliable in the event of power on/off issues.

Once an E-Maxx is connected, an installer can also be setup to access and program

the SP PRO inverters on sites which are assigned to them via the

www.myarvio.com.au web page using a program called Proxy which works in

conjunction with SP LINK.

Multiple inverters can be accessed remotely and simultaneously and remote access

via the app continues while programming so that there is no down time for the user.

SYSTEM DIAGRAM

www.myarvio.com.au

E-Maxx SP Pro

Plug pack 5VDC output

12VDC to 5VDC converter

As a link between the inverter and any internet enabled modem router, the E-Maxx

creates a gateway to run SP LINK from any location. Expandability with many future

control and automation options is provided.

SAFETY

Avoid the device coming into contact with water and dust as damage caused by

environmental conditions may void the warranty. Do not use another power supply

other than the approved options.

Ensure that there is reasonable ventilation available to the E-Maxx. If installing within

an enclosure, please choose an enclosure which has at least 8 x the volume of the

E-Maxx.

MODELS

Current models include:

E-MAXX 1 –Single phase for one SP PRO

E-MAXX 2 –Dual phase for two SP PROs

E-MAXX 3 –Three phase for three SP PROs

UNPACKING & INSPECTION

Carefully inspect the shipping packaging before beginning the installation.







  

①Control LED

②Ethernet Port

③USB 2.0 Ports

④Mini USB Port

⑤HDMI Port

⑥Power Supply Inlet

MOUNTING

Use the hook and loop fastener strips to attach the E-Maxx to your inverter or near

the inverter. Make sure that all ports of the E-Maxx are accessible. We recommend a

mounting position as shown in the picture. Ensure that the strips are clear from any

screws and that at least 50% of the louvres are free for good ventilation. Create a

strong bonding between the hook and loop fasteners by pressing the hook on the

look side with an appropriate pressure.

Alternatively an enclosure with a clear lid and quick release buckles can be fitted to

the wall with the E-Maxx inside it to provide IP protection and maintain accessibility

and visibility.

WIRING

Plug the USB cable in one of the USB

Ports ③. Connect the other end of the

USB cable to the inverter. For older

inverters use an approved adapter USB-

to-RS232 to establish the connection.

The E-Maxx series can connect to up to

three SP PRO inverters. Ensure that you

purchased the correct model.

It is not recommended that the E-Maxx be

fitted inside the SP PRO as you cannot

view the indicator LEDs and this could

affect the SP PRO warranty.

Insert the LAN cable coming from the internet modem into the Ethernet Port ②of

the E-Maxx. The cable is placed right when you hear a click. Modem configuration

such as port forwarding is not needed for any modem configured with default

settings.

The E-Maxx can be powered by the approved plug pack or approved DC to DC

converter. When using the DC to DC converter, a suitably qualified person should

open the SP PRO front panel and connect the 12VDC feed to the input as labelled

on the SP PRO PCB and converter cables provided. Check polarity before

connecting.

Plug the power feed into the power supply inlet ⑥and establish a connection.

The wiring has been successful if a green LED at the Ethernet Port and a red LED

near the Power Supply Inlet is turned on.

Third party Ethernet extension systems may be used at your discretion. For example

EOP kits or Ethernet to WIFI modules.

Approved USB to RS232 converter is by ATEN model UC-232A.

Approved plug pack is by CISCO model PA100-AU, this also requires a large DC to

small DC jack adaptor lead which is provided with the plug pack if purchased with

the E-Maxx.

OPERATION

No further configuration is required. A red LED indicates that the E-Maxx is hooked

up to 5V power. While booting the E-Maxx a solid blue light will appear. This

changes to a flashing (heart beat) blue light after the booting process is done and the

E-Maxx is running.

A green LED flashes when there is 100 Mbps connectivity. A yellow LED flashes

when there is 1000 Mbps connectivity.

SETUP FOR ALL USER TYPES

Ensure that the SP PRO you are configuring has the default name and password

set. Details other than the SP PRO defaults are not yet possible with E-Maxx, this

feature will be released in a future version.

Using a web browser, login to www.myarvio.com.au.

Create a new user or login with the details provided to you.

There is a serial number printed on the E-Maxx. Within the www.myarvio.com.au

web page, check to see if your E-Maxx serial number is already listed. This may

already have been entered here by your supplier. You may also add a unit manually

by following the prompts.

You can also assign a unique name to each E-Maxx and each inverter here and

configure the unique menu descriptions in the remote control section of the

OpenHAB app if you are planning to use this feature.

Purchaser

Purchaser is the entity who bought the E-Maxx from Arvio.

A purchaser can only register a Principal Installer for an E-Maxx.

By default a purchaser does not have access to do anything with an E-Maxx.

Principal Installer

A principal installer is main entity responsible for the E-Maxx. Besides managing

owners and guests a principal installer can create other installers for a site.

There can only be one principal installer per E-Maxx.

Installer

On top of what an owner is permitted to do, an installer can create owners for a site if

the installer is granted access by Principal installer.

A site can have 0, 1 or many owners.

An installer cannot execute commands, e.g. turning on / off generator, unless

granted access by the owner. This access can be granted by the owner through the

OpenHab app in the settings menu.

Owner

The owner is the person who owns the E-Maxx.

The owner is the only authority who is permitted to execute commands, e.g. turning

on generator, turning lights on / off.

An owner can create guests for a site.

An owner can change settings, e.g. change name of the site

An owner can grant access to execute command to installer.

An owner cannot be a guest at the same time.

Guest

This user is read only user, has no right to create clients or change settings for a

site.

Support / Admin

These roles can impersonate any user and act on their behalf without knowing their

password. This allows support/admin to simulate what a user is experiencing without

knowing their login password.

As an installer, owner or guest you can now access your SP PRO through OpenHAB

on your smart phone or tablet. OpenHAB can be downloaded from App Store (iOS)

and Google play (Android). Enter these details in OpenHAB once opened.

Turn off “Demo mode”

Remote URL https://myarvio.com.au:8444

User name ____________

Password ____________

Turn off “Ignore SSL certificates”

Save

You can access information about your SP PRO inverters, activate remote controls

and view various graphs through OpenHAB depending on the permissions granted

to you.

SETUP FOR INSTALLERS & OWNERS

Download and install the latest version of SP_LINK.msi from

http://www.selectronic.com.au/sppro/SP LINK.htm.

For initial setup, temporarily remove the USB cable from each SP PRO and connect

your PC directly to each SP PRO and configure them using the SP LINK Site

Configuration Wizard. Retain the default user name and passwords. Then

“configure” each SP PRO. Once all SP PRO units are configured, reconnect each

USB cable to the E-Maxx unit and reboot it by unplugging the power lead, waiting 5

seconds and then reconnecting it.

If you want to configure an SP PRO remotely or over the local network via your PC

or view the SP LINK “Quickview” screen you will need to install Proxy. From the

“Download” section in www.myarvio.com.au, download and install “Proxy” (you have

to be logged on to www.myarvio.com.au with your username and password).

Open Proxy and then enter your login details.

Ensure that you have a reliable internet connection at both the E-Maxx site and the

remote site to minimise the risk of a programming or firmware upgrade fault caused

by poor internet connectivity. Ensure that you have reliable power at the remote site

to ensure that your PC remains on during any programming or upgrade.

Within Proxy, select the SP PRO to be accessed from the dropdown menu. Press

“Launch SP LINK”. You effectively have two programs open at one time.

1. Choose an SP PRO in Proxy

2. Press “Launch SP LINK”

3. SP LINK will open and connect to the selected SP PRO through the gateway,

retrieve the configuration and be ready for use

You can open SP LINK multiple times and choose a different SP PRO in Proxy each

time. Take extra care to check which SP PRO you are connected to before pressing

“Configure”after making your setting changes. Note that you will need the SP PRO

password to configure the SP PRO, otherwise you can only retrieve and view.

Configuring an SP PRO should only be completed by a qualified and certified

Selectronic installer. Arvio can take no responsibility for changes made to SP PRO

inverters using the E-Maxx.

Check the www.myarvio.com.au website before upgrading the firmware of an SP

PRO to ensure that the new firmware is supported by the E-Maxx. After an SP PRO

firmware upgrade, the SP PRO will restart and power may be lost from the E-Maxx

power supply and the internet modem temporarily. You may/will need to reconnect to

the site following a reboot. Allow a few minutes before attempting to reconnect.

SP PRO PROGRAMMING

For normal operation, there is no special programming required within the SP PRO

for the E-Maxx to operate.

SP PRO ACCESS VIA OPENHAB

You can select combined graphs and zoom into

each of your site’s SP PRO inverters.

The average AC voltage is calculated by adding

the voltage of each phase and diving by the

number of phases. If one phase if turned off, the

average will reflect this.

SP PRO PROGRAMMING SPECIAL FEATURES

Within OpenHAB, the user has the ability to control up to 6 function switches per SP

PRO which are connected to up to three outputs on that SP PRO.

Outputs

1. Generator Power emulates the Generator

Start function on the SP PRO front panel. For

configuration of the Generator Start feature,

consult your SP PRO installer manual. If the

Generator Start button functions on the front panel

of the SP PRO, then the OpenHAB Generator Start

should function.

2. Schedules 1 to 4. Within SP LINK, there are

four schedules which can be programmed and

assigned to one output which is selectable as a

relay or digital output. The installer can set this up

to perform the function of switching as per the SP

PRO manual. Turning on and off these four

schedules will cause the nominated output to obey

the active schedule or schedules. For example

setting and selecting schedule 1 to be 7am to

10am and schedule 2 to be 2pm to 4pm will turn on

the output during these time periods.

3. Water Pump is simply an on or off output

which can be assigned within SPLINK in the Digital

Control section on the same configuration screen

as the schedule set up as above. This can be used

to switch other equipment if desired.

This programming can be repeated in each SP

PRO connected to the E-Maxx.

Tabla de contenidos

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario