ARTHUR HOLM Dynamic3Talk Manual de usuario

User Guide

Danish craftmanship

Mediterranean soul

Technology Serving Design

Dynamic3Talk

HDCP compliant aluminium foldable and rotatable monitors

with integrated independent microphone lift system

TABLE OF CONTENTS

REGULATIONS AND SECURITY 5

SAFETY INSTRUCTIONS 5

SYSTEM DESCRIPTION 7

BEFORE INSTALLATION 12

BEFORE SHIPPING 13

INSTALLATION INSTRUCTIONS 14

CONTROLS 18

OSD MENU 20

ISD MENU 23

INPUT CONNECTORS 29

MONITOR AHnet PROTOCOL 32

DynamicTalk AHnet PROTOCOL 36

VIDEO SIGNALS 38

AHLink 39

INFORMATION ON DISPOSAL 45

WARRANTY TERMS AND CONDITIONS 46

WELCOME

Thank you very much for purchasing an Arthur Holm product.

Please, read these installation and operating instructions carefully and

keep them in a safe place for future consultations.

We remain at your entire disposal if you have any suggestions.

Henrik Holm

General Manager

[email protected]

ABOUT US

The Company

Arthur Holm has its origins in the Danish furniture designer Jorgen Alex

Jensen, who was active during the sixties and the seventies. His design

inspiration and his concept of ergonomics have been continued by his

family, who is the design force behind Arthur Holm product range. The

result of combining Scandinavian design tradition with Mediterranean

creativity, exibility and emotion is a wide product range built on more

than 25 years of craftsmanship.

Arthur Holm oers a professional product range where tomorrow’s

technology is shaped into valued materials with design exibility and

customisation, specially created to enhance communication in reception,

collaboration, conference and meeting areas.

The art of customisation

Arthur Holm oers a range of ingenious products whose designs are based

on quality materials and the latest technology. Products which endow

meeting and conference rooms with silent, ergonomic, innovative and

aesthetic solutions that integrate into the furniture, hang from the walls as

works of art or are used as interactive points of information.

The world of Arthur Holm

Arthur Holm oers a selection of unique, elegant, versatile, exible and

ergonomic products that are being used in meeting and conference

rooms, reception areas, auditoriums and public zones of leading

companies throughout the world.

The numbers speak for themselves! We currently own 33 product patents,

have presence in over 45 countries with products and solutions inmore

than 25,000 installations.

It will be our pleasure to work with you, designing your unique and

personalised environment. Our broadcast electronic engineers will

provide the latest technology while our design team will oer you the most

exclusive appearance.

Our team puts its heart, passion and pride in all our designs.

SAFETY INSTRUCTIONS

Plugs

• Do not dismantle any part of the monitor power connector.

• Disconnect the power plug from the AC outlet when the monitor is not

going to be used for an indenite period of time.

Power and extensions cords

• Use the appropriate power cord with the correct plug type.

• Do not overload wall outlets or power cords.

• Make sure the total ampere passed through an extension cord does not

exceed the maximum allowed by the cable used.

• Do not place anything on the power cord.

• Do not locate this product where a person may walk or trip over the

cord.

REGULATIONS AND SECURITY

ATTENTION: Do not disassemble or modify the device in any way.

This symbol warns of the presence of dangerous un-insulated

voltages inside some of the components, of sucient magnitude

to expose people to risk of electronic shock.

This symbol draws attention to important use and maintenance

instructions in the manual that accompanies the unit.

This symbol indicates that the equipment conforms to the norms

established by the European Community.

This symbol indicates D.C. current.

This symbol indicates that the equipment has some potential

entrapment hazard parts.

Wiring connected to hazardous voltage requires installation by

qualied personnel or the use of ready-made exible cables.

For your security, your equipment must be connected to an

electrical outlet with grounding connection protection.

Since the plug is used to disconnect the device, the operating

electrical outlet must be in an easily accessible place.

Environment

• Install the equipment on an elevated, at surface.

• Install the equipment in a ventilated area.

• Avoid exposing the equipment to:

 Rain or water

 Excessive heat, cold or humidity

 Area exposed to direct sunlight

 Dirty areas

 Equipment generating strong magnetic elds

• Avoid placing open containers of liquid, near the equipment.

• Keep a minimum distance of 30 mm in order to have good ventilation.

• Never place above the device any sources of ames such as lighted

candles, etc.

• If you are using the device in extreme weather conditions and/or

tropical climates, the equipment should be installed in a room which

ensures a reasonable level of temperature and humidity.

• To prevent damage the equipment must be rmly anchored to the

surface, as shown on the installation instructions.

SAFETY INSTRUCTIONS

SYSTEM DESCRIPTION

General

Arthur Holm Dynamic3Talk is a motorised product range that provides

different working positions and includes an independent lift for

“gooseneck” microphones. The aluminium monitor housing rises and

leans, has an additional 180° rotation movement, and retracts inside

the work surface in 2 different positions: with the monitor oriented up

or down. The movement can be stopped at 90° in order to share the

display with the person located at the opposite side of the desk. The

screen’s lifting system automatically activates the elevation of a tray

where a keyboard and mouse can be placed.

The integrated independent lift system for microphones provides a

rounded microphone coverlid and it not only makes the microphone

disappear within the desk surface, but it also provides a pleasant light

to indicate its status.

This patented, protective lighting ring stores safely the microphones,

making meeting and conference spaces more flexible and versatile.

Highlights

• Aluminium foldable and rotatble monitor with an independent

microphone lift

• Opens, folds down and rotates 180°

• 2 working positions: vertical and horizontal (with screen facing up)

• Automatic image ip

• Synchronised tray lift movement

• Milled aluminium housing and cover plate

• Front double sided anti-reecting coating 3 mm black edged glass

• Flotating security sensor

• AH-AMMC Auto Mechanical Movement Calibration

• Microphone lift compatible with 3 pin XLR 500 mm “gooseneck”

microphones

• Patented 360° LED lighting ring indicates microphone status

• PA and Conference working modes

• Wireless connectivity for setup and control

SYSTEM DESCRIPTION

Available Models

MODEL DESCRIPTION

AH17D3RHDGATalk

HDCP compliant 17,3" Full HD foldable monitor with horizontal and

vertical working positions including an independent lift for “gooseneck”

type microphones. Can work in a horizontal position levelled with the

desk surface or in a vertical position with 20˚ of variable inclination.

The monitor can rotate 180˚ and can be folded with the screen facing

down. Both the monitor housing and cover plate are made of anodised

aluminium. The monitoris protected by a 3 mm. double-sided anti-

reective black edged glass. DVI-I and DVI-D inputs. Interactive Setup

Display allowing the control, setup and diagnose of the monitors.

Monitors provide RS-422 I/O allowing the remote control of movements,

speeds, safety settings, brightness, contrast and backlight. The monitors

are equipped with AH-AMMC: an auto mechanical movement

calibration system.

AH17D3HDGATalk

HDCP compliant 17,3" Full HD foldable monitor with vertical working

position including an independent lift for “gooseneck” microphones.

Can work in a in a vertical position with 20˚ of variable inclination.

The monitor can be folded with the screen facing down. Both the

monitor housing and cover plate are made of anodised aluminium. The

monitor is protected by a 3 mm. double-sided anti-reective black

edged glass. DVI-I and DVI-D inputs. Interactive Setup Display allowing

the control, setup and diagnose of the monitors. Monitors provide RS-

422 I/O allowing the remote control of movements, speeds, safety

settings, brightness, contrast and backlight. The monitors are equipped

with AH-AMMC: an auto mechanical movement calibration system.

SYSTEM DESCRIPTION

Available Models

MODEL DESCRIPTION

AH19D3RHDGATalk

HDCP compliant 18,5" Full HD foldable monitor with horizontal and