ARTHUR HOLM AH17S HDGA Manual de usuario

User manual

AH17S HDGA

17’’ professional widescreen monitor with manually tilt adjustment

Table of contents

EC REGULATIONS & SECURITY 6

SAFETY INSTRUCTIONS 7

FEATURES 8

BOX CONTENTS 8

CONTROLS 9

OSD MENU 10

INPUT CONNECTORS 13

INPUT SIGNALS 13

PRODUCT WARRANTY 15

Welcome

Thank you for purchasing an ARTHUR HOLM product.

Our product range has been designed to create the perfect meeting room,

where the screens are a part of the interior design as well as essential

communication tools.

Please, read this installation and operating instructions carefully and keep

them in a safe place for a future consultation.

We remain at your entire disposal if you have any suggestions

that would help us to improve our products.

Henrik Holm

General Manager

EC Regulations and Security

ATTENTION: Do not disassemble or modify the device in any way.

This symbol warns of the presence of dangerous un-insulated voltages

inside some of the components, of sufﬁcient magnitude to expose people

to risk of electronic shock.

This symbol draws attention to important use and maintenance instructions

in the manual that accompanies the unit.

This symbol indicates that the equipment conforms to the norms

established by the European Community.

Safety instructions

PLUGS

– Do not dismantle any part of the monitor power connector.

– Disconnect the power plug from the AC outlet when the monitor is not

going to be used for an indeﬁnite period of time.

POWER AND EXTENSIONS CORDS

– Use the appropriate power cord with the correct plug type

– Do not overload wall outlets or power cords

– Make sure the total ampere passed through a extension cord does not

exceed the maximum allowed by the cable used

– Do not place anything on the power cord

– Do not locate this product where a person may walk or trip over the cord

Wiring connected to hazardous voltage requires installation by qualiﬁed

personnel or the use of ready-made ﬂexible cables.

For your security, your equipment must be connected to an electrical

outlet with grounding connection protection.

The operating electrical outlet must be in an easily accessed place.

ENVIRONMENT

– Install the equipment on an elevated, ﬂat surface

– Install the equipment in a ventilated area

– Avoid exposing the equipment to:

Rain or water

Excessive heat, cold or humidity

Areas exposed to direct sunlight

Dirty areas

Equipment generating strong magnetic ﬁelds

– Avoid placing open containers of liquid, near the equipment

– Keep a minimum distance of 30mm in order to have good ventilation

– Never place any sources of ﬂames, such as lighted candles, etc. above the device

– If you are using the device in extreme weather conditions and/or tropical

climates, the equipment should be installed in a room which ensures a

reasonable level of temperature and humidity

- To prevent damage the equipment must be ﬁrmly anchored to the surface,

as shown in the installation instructions

System Description

FEATURES

- 17" TFT Active Matrix display, widescreen format, FULL HD

- Low power consumption

- Low radiation

- Quick response time

- Signal input: HDMI HDCP compliant

- Manually tilt adjust from 0º to 25º

- Monitor housing made of solid mechanized aluminium in anodized ﬁnish and

front glass

BOX CONTENTS

Before the installation of your monitor, please check the contents of the

shipping box, it must contain the following items:

- Monitor unit

- Power cord

- Power supply 100-240Vac, 50-60Hz. Output 12V

- User Manual

Controls

REMOTE CONTROL

Use the IR remote control to access the monitor conﬁguration:

POWER Switch ON/OFF the monitor

MENU Activates the OSD menu on screen

DOWN Cursor control down on OSD menu. When the

OSD menu

is not active on screen, selects the input

source

UP Cursor control up on OSD menu

LEFT Cursor control left on OSD menu

RIGHT Cursor control right on OSD menu

OK Selects the function on OSD menu

ACCESSING THE MENU SYSTEM

– With the OSD off, push the MENU button to activate the main OSD menu

– Press the UP and DOWN button to move from one function to another.

As you move from one icon to another, the function name changes

to reﬂect the function or group of functions represented by that icon.

Please refer to the following sections below to view a complete list of

all the functions available for the monitor

– Press the OK button to enable the item

– When a function is selected, press the LEFT and RIGHT buttons in order to

change the parameter of the function

OSD menu

Press the Menu button to access to the main menu:

PICTURE

CSM Conﬁguration of the image colour

Cool

Normal

Warm

User (manually adjustment of red, green and blue colours)

PSM Conﬁguration of the bright image

Dynamic

Standard

Mild

Game

User (manually adjustment of brightness and contrast)

Contrast Image contrast adjustment

Brightness Image brightness adjustment

Tabla de contenidos

Otros manuales de Monitor de ARTHUR HOLM

ARTHUR HOLM

ARTHUR HOLM D1Twin Manual de usuario

ARTHUR HOLM

ARTHUR HOLM Dynamic3 AH15D3HDGA Manual de usuario

ARTHUR HOLM

ARTHUR HOLM DynamicX2 AH22DX216DGA Manual de usuario

ARTHUR HOLM

ARTHUR HOLM Dynamic2 AH12D216A Manual de usuario

ARTHUR HOLM

ARTHUR HOLM Dynamic3 Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH1 Series Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH1 Series Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH22DRM Manual de usuario

ARTHUR HOLM

ARTHUR HOLM Dynamic DB2 Manual de instrucciones de instalación

ARTHUR HOLM

ARTHUR HOLM AH15D X2HDGA Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH10DB2 Manual de usuario

ARTHUR HOLM

ARTHUR HOLM Dynamic3Talk Manual de usuario

ARTHUR HOLM

ARTHUR HOLM DB2Share Manual de usuario

ARTHUR HOLM

ARTHUR HOLM Dynamic 3 Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH19D X2HDGA Manual de usuario

ARTHUR HOLM

ARTHUR HOLM DB2Twin Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH2 Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH17 NTTHD Manual de usuario

ARTHUR HOLM

ARTHUR HOLM DB2 Series Manual de usuario

ARTHUR HOLM

ARTHUR HOLM Dynamic3Reverse Manual de usuario

ARTHUR HOLM

ARTHUR HOLM DynamicX2KM Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH10 DA Manual de usuario

ARTHUR HOLM

ARTHUR HOLM DynamicX2 AH22DX216GA Manual de usuario

ARTHUR HOLM

ARTHUR HOLM AH12TX16GA Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación