ARTHUR HOLM AH1 Series Manual de usuario
AH12TX16GA
AH17TXHDGA
AH19TX16GA
AH22TX16GA
Manually foldable professional monitors
User manual
AH1
3
Table of contents
EC REGULATIONS & SECURITY 6
SAFETY INSTRUCTIONS 7
APPLICATIONS 8
FEATURES 8
BOX CONTENTS 8
CONNECTIONS 9
TROUBLE SHOOTING 9
CONTROLS 10
OSD MENU 11
PRODUCT HANDLING 14
INPUT CONNECTORS 15
INPUT SIGNALS 16
PRODUCT WARRANTY 19
5
Welcome
Thank you for purchasing an ARTHUR HOLM product.
Our product range has been designed to create the perfect meeting room,
where the screens are a part of the interior design as well as essential
communication tools.
Please, read this installation and operating instructions carefully and keep
them in a safe place for future reference.
We remain at your entire disposal if you have any suggestions that would
help us improve our products.
Henrik Holm
General Manager
6
EC Regulations and Security
ATTENTION: Do not disassemble or modify the device in any way.
This symbol warns of the presence of dangerous un-insulated voltages
inside some of the components, of sufficient magnitude to expose people
to risk of electronic shock.
This symbol draws attention to important use and maintenance instructions
in the manual that accompanies the unit.
This symbol indicates that the equipment conforms to the norms
established by the European Community.
Safety instructions
PLUGS
– Do not dismantle any part of the monitor power connector.
– Disconnect the power plug from the AC outlet when the monitor is not
going to be used for an indefinite period of time.
7
Safety instructions
POWER AND EXTENSIONS CORDS
– Use the appropriate power cord with the correct plug type
– Do not overload wall outlets or power cords
– Make sure the total ampere passed through a extension cord does not
exceed the maximum allowed by the cable used
– Do not place anything on the power cord
– Do not locate this product where a person may walk or trip over the cord
Wiring connected to hazardous voltage requires installation by
qualified personnel or the use of ready-made flexible cables.
For your security, your equipment must be connected to an electrical
outlet with grounding connection protection.
The operating electrical outlet must be in an easily accessed place.
ENVIRONMENT
– Install the equipment on an elevated, flat surface
– Install the equipment in a ventilated area
– Avoid exposing the equipment to:
Rain or water
Excessive heat, cold or humidity
Areas exposed to direct sunlight
Dirty areas
Equipment generating strong magnetic fields
– Avoid placing open containers of liquid, near the equipment
– Keep a minimum distance of 30mm in order to have good ventilation
– Never place any sources of flames, such as lighted candles, etc above the
device
– If you are using the device in extreme weather conditions and / or tropical
climates, the equipment should be installed in a room which ensures a
reasonable level of temperature and humidity
8
System Description
APPLICATIONS
The AH1 family consists of a manually foldable monitor in milled aluminium
with anodised finish and dark cast iron base. Flush antiglare protection glass
with elegant black marking.
This TFT-LCD product range is specially designed for desk integration at:
Conference rooms Meeting rooms Board rooms
Auditoriums Information desks Training rooms
FEATURES
– TFT Active Matrix display
AH12TX 16GA 12’’ Widescreen
AH17TX HDGA 17” FULL HD
AH19TX 16GA 19’’ Widescreen
AH22BTX 16GA 22’’ FULL HD
– Manually foldable monitor
– Low power consumption
– Low Radiation
– Quick response time
– Data inputs DVI-D and DVI-I. HDCP compliant
– USB extended connector integrated on the lateral monitor housing
– Optional: capacitive touch screen (no additional drivers needed)
BOX CONTENTS
Before the installation of your monitor, please check the contents of the
shipping box, it must contain the following items:
- Monitor
- Power cord
- Power supply 100-240Vac, 50-60Hz. Output 12V
- User Manual
9
Connections
POWER CONNECTION
1. Plug the power cable from the power supply into an AC socket of
100-240 Vac, 50-60Hz.
2. Plug the 12Vdc cable into the socket on the unit
SIGNAL CONNECTION
1. Use the DVI-I input to connect a DVI-D signal or an analog RGB signal
(VGA).
2. Plug the DVI-D connector to a DVI-D signal.
Use high quality DVI cables with 2m maximum length
Trouble Shooting
The monitor doesn’t turn on:
Check the power connections at the AC plug to the DC plug on the unit
No input signal:
Check the input signal cables
No image is displayed:
Check the status of the brightness, contrast and colour controls
Bad quality image:
Check the input signal cable
Try to auto adjust the image or reset the controller
Other problems:
Please, contact your distributor
10
Controls
OSD MONITOR CONTROL
The OSD buttons, to control or configure the monitor, are located on the
lower body housing of the system
MENU Activates the OSD menu. Exits the OSD menu when is
active
SEL Selects the OSD menu function
DOWN Cursor control down on the OSD menu
UP Cursor control up on the OSD menu
LEFT Cursor control left on the OSD menu
RIGHT Cursor control right on the OSD menu
SOURCE Signal input selection (No function in this model)
LED Indicates operation status
POWER Monitor power on/off
MENU SELECT DOWN UP LEFT RIGHT SOURCE LED POWER
Otros manuales para AH1 Series
1
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Monitor de ARTHUR HOLM
ARTHUR HOLM
ARTHUR HOLM AH15D X2HDGA Manual de usuario
ARTHUR HOLM
ARTHUR HOLM DynamicX2KM Manual de usuario
ARTHUR HOLM
ARTHUR HOLM DB2Share Manual de usuario
ARTHUR HOLM
ARTHUR HOLM Dynamic3 AH15D3HDGA Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH24D Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH10DB2 Manual de usuario
ARTHUR HOLM
ARTHUR HOLM Dynamic2 AH12D216A Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH2 Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH15D X2HDA Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH17D1HDA2F Manual de usuario
ARTHUR HOLM
ARTHUR HOLM RISE AH12RI Wide Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH24DB2 Manual de usuario
ARTHUR HOLM
ARTHUR HOLM Dynamic3Talk Manual de usuario
ARTHUR HOLM
ARTHUR HOLM Dynamic3Reverse Manual de usuario
ARTHUR HOLM
ARTHUR HOLM DB2Share Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH17D3 RHDGA TALK Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH15D X2HDGA Manual de usuario
ARTHUR HOLM
ARTHUR HOLM DynamicX2KM Manual de usuario
ARTHUR HOLM
ARTHUR HOLM AH 18D3 RHDGA RV Manual de usuario
ARTHUR HOLM
ARTHUR HOLM D1Twin Manual de usuario
