Array electronic TC-Pro480 Series Manual de usuario
Ver:3.0
1
Multifunction LCD Digital Timer
Multifunction LCD Digital Timer
TC-Pro480×××
Highly visible display with backlit negative transmissive LCD
Visual alert when output status changes
PNP/NPN switchable DC-voltage input
Finger-safe terminals(screw terminal block models)
Three-language instruction manual
Applied to connect PC and HMI
Contents
Model Number Structure....................................................2
Specifications.....................................................................3
Nomenclature.....................................................................5
Connection.........................................................................6
Operating Procedures........................................................7
Timer Function .................................................................10
Twin Timer Function.........................................................13
2-Stage Timer Function....................................................15
Sequence Charts .............................................................18
Dimensions ......................................................................23
Installation & Accessories ................................................24
Input Connections ............................................................25
Safety Precautions...........................................................27
Additional Information ......................................................29
List of Settings .................................................................30
■
■
■
■
■
■
2
Multifunction LCD Digital Timer/Counter/Tachometer
Model Number Structure
List of Models
Output type Supply voltage
Model
Standard Communication
Contact output 100~240 VAC TC-Pro480SRA (-D) TC-Pro480CRA (-D)
24 VDC/24 VAC TC-Pro480SRD (-D) TC-Pro480CRD (-D)
Transistor output 100~240 VAC TC-Pro480STA (-D) TC-Pro480CTA (-D)
24 VDC/24 VAC TC-Pro480STD (-D) TC-Pro480CTD (-D)
Note: The model with communication must be used with cable.
Model Number Legend
TC-Pro 480 -
1 2 3 4
Accessories (Order Separately)
Name Models
9-pin Female D-sub cable for RS-232 connector, 1.5m Cable CAB-090A232
9-pin Female D-sub cable for RS-485 connector, 1.5m Cable CAB-090A485
9-pin Female D-sub cable for RS-422 connector, 1.5m Cable CAB-090A422
9-pin male D-sub adapter for
CAB-090A232/CAB-090A485/CAB-090A422 ADP-090401
9-pin Female D-sub cable for RS-232 connector, 1.5m Cable CAB-090B232
9-pin Female D-sub cable for RS-485 connector, 1.5m Cable CAB-090B485
9-pin Female D-sub cable for RS-422 connector, 1.5m Cable CAB-090B422
Mounting Track 0F-A
Panel Protective Cover SVF-A
Communication Protective Cover TTL-11
Note：CAB-090A232/485/422 is used for Flush mounting products
CAB-090B232/485/422 is used for DIN track mounting products
■
■
■
1. Communication
S: Standard (no communication)
C: Communication
2. Output type
R: Contact
T: Transistor
3. Supply voltage
A: 100V~240VAC
D: 24VDC、24VAC
Mounting method
None: Flush mounting
D: DIN track mounting
4.
0
0
3
Multifunction LCD Digital Timer
Specications
Ratings
Item TC-Pro480□□□-□
Classication Digital timer
Rated supply voltage 100~240VAC (50/60Hz), 24VAC (50/60Hz), 24VDC (permissible ripple: 20% (p-p) max.)
Operating voltage
range 85% to 110% rated supply voltage(24VDC; 90% to 110%)
Power consumption
Approx. 6.2VA at 264VAC,
Approx. 5.1VA at 26.4VAC,
Approx. 2.4W at 24VDC
Mounting method Flush mounting, DIN track mounting
External connections Screw terminals
Terminal screw
tightening torque 0.5 N•m Max.
Display
7-segment, LCD display
Present value: 9-mm-high characters, white
Set value: 4-mm-high characters, white
Digits 6 digits, PV/SV (-99,999~999,999)
Time range
999.999s (0.001-s unit), 9999.99s (0.01-s unit), 99999.9s (0.1-s unit)
999999s (1-s unit), 9999min59s (1-s unit), 99999.9min (0.1-min unit),
999999min (1-min unit), 9999h59min (1-min unit), 99999.9h (0.1-h unit), 999999h (1-h unit)
Timer mode Elapsed time (UP), Remaining time (down) (selectable)
Input signals Signal, reset, gate
Input method
No-voltage input/voltage input (switchable)
No-voltage input
ON impedance: 1kΩ max. (leakage current: 5~20 mA when 0Ω)
ON residual voltage: 3V max.
OFF impedance: 100kΩ min.
Voltage Input
High(logic) level: 4.5 to 30 VDC
Low(logic) level: 0 to 2 VDC
(Input resistance: approx. 4.7 kΩ)
※
◆
◆
Signal, Reset, Gate Minimum input signal width: 1 or 20 ms (selectable, same settingfor all inputs)
Power reset Minimum power-opening time: 0.5 s (except for A-3, b-1 and F mode)
Reset system Power reset (execpt for A-3, b-1and F mode), external and manual reset
Sensor waiting time Approx. 250 ms (control output is turned OFF and no input is accepted during sensor waiting
time)
Output modes A, A-1, A-2, A-3, b, b-1, d, E, F, Z, ton or toff etc.
One-shot output time 0000.01~9999.99s
Output method Contact / transistor output
Control output
SPDT contact output: 5A at 250 VAC, resistive load (cosФ=1)
Minimum applied load: 10 mA at 5 VDC (failure level: P, reference value)
Transistor output: NPN open collector, max. 100mA at 30 VDC
Residual voltage: 1.5 VDC max. (approx. 1V)
Output category according to EN60947-5-1 for timers with Contact outputs
(AC-15; 250V 3A / AC-13; 250V 5A / DC-13; 30V 0.5A)
Output category according to EN60947-5-2 for timers with Transistor outputs
(DC-13; 30V 100 mA)
NEMA B300 Pilot Duty, 1/4 HP 5-A resistive load at 120 VAC, 1/3 HP 5-A resistive load at 240
VAC
External power supply 12VDC (15%), 80mA
Key protection Yes
Memory backup EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min.
Ambient temperature Operating: -10 to 55°C (with no icing or condensation)
Storage: -25 to 65°C (with no icing or condensation)
Ambient humidity 25% to 85%
Case color Flush mode: black, DIN track mode: gray-black
Attachments Waterproof packing, ush mounting adapter
■
4
Multifunction LCD Digital Timer
Characteristics
Item TC-Pro480□□□-□
Life expectancy Mechanical: 10,000,000 operations min.
Electrical: 100,000 operations min. (5 A at 250 VAC, resistance load)
EMC
(EMI)
Emission Enclosure:
Emission AC mains:
(EMS)
Immunity ESD:
Immunity RF-interference:
Immunity Conducted Disturbance:
Immunity Burst:
Immunity Surge:
Immunity voltage Dip/interruption:
EN61326
EN55011
EN55011
EN61326
EN61000-4-2
EN61000-4-3
EN61000-4-6
EN61000-4-4
EN61000-4-5
EN61000-4-11
Weight Approx. 168g
■
5
Multifunction LCD Digital Timer
Nomenclature
Reset Indicator
Control Output Indicator
Present Value (character height: 9 mm)
Time Unit Display (If the time range is 0 min,
0.0 min, 0 h, 0.0 h, 0h0 min, this display ashes
to indicate timing operation)
Set Value (character height: 4 mm)
The First Setting Key
The Second Setting Key
The Third Setting Key
The Fourth Setting Key
The Fifth Setting Key
The Sixth Setting Key
Reset Key (resets present value and output)
Mode Key (changes modes and setting items)
Key Protection Indicator (the preset value is
OFF)
Set Value (Range) A, B Display
6
Multifunction LCD Digital Timer
Connection
Block Diagram
Output circuit
Basic isolation
Display circuit
Key switch circuit
Input circuit Internal control circuit
Power supply circuit
Basic isolation
I/O Functions (Timer/Twin Timer)
Input
Start signal Stops timing in A-2 and A-3 (power ON delay) modes
Starts timing in other modes
Reset
Reset present value (In elapsed time mode, the present value returns to 0; in
remaining time mode, the present value returns to the set value)
Count inputs are not accepted and control output turns OFF while reset input
is ON.
Reset indicator is lit while reset input is ON.
Gate Inhibits timer operation
Outputs Control output
(OUT)
Outputs take place according to designated operating mode when timer
reaches corresponding set value.
I/O Functions (2-Stage Timer)
Inputs
Start signal Starts timing
Reset
Resets present value (the present value returns to 0)
Timing inputs are not accepted and control output turns OFF while
reset input is ON.
Reset indicator is lit while reset input is ON.
Gate Inhibits timer operation
Outputs
Forecast
value
setting
Control output
(OUT2) Turn ON when the present value reaches the set value.
Forecast output
(OUT1)
Turn ON when the present value reaches the forecast value.
The forecast value=set value-forecast set value
Absolute
value
setting
Control output 2
(OUT2) Turn ON when the present value reaches the set value 2.
Control output 1
(OUT1) Turn ON when the present value reaches the set value 1.
Note: Two control outputs can be used.
■
■
■
7
Multifunction LCD Digital Timer
Operating Procedures
Timer/Twin Timer/2-stage Timer Selection Mode
Power ON
Note: when the mode is changed to timer/twin timer/2-stage timer
selection mode, the present value is reset and output turns OFF.
See note
3s min.
See note
3s min.
Timer setting mode
(See Run Mode on page 10)
Twin Timer setting mode
(See Run Mode on page 13)
Twin Forecast setting mode
(See Run Mode on page 15)
Run Mode
Timer / Twin Timer / 2-Stage Timer Selection Mdoe
■
8
Multifunction LCD Digital Timer
Communication Format Function Selection Mode
Power ON
See note
3s min
See note
3s min
Note: Timer will reset when changing into the communication
format setting mode during operation
Transmission
Speed
Parity Check
Date bit
Stop bit
Station
address
Communication
on/off
Set the transmision speed with key
Set the parity check with key
Set the date bit with key
Set the stop bit with key
Set the Station address (HEX) with key
Set communication on/off with key
Transmission speed:1200,2400,4800,9600,14400,19200,28800,38400,57600bps
(NONE) (ODD) (EVEN)
(8 bit) (7 bit)
(1 bit) (2 bit)
(01) (FF)
(ON) (OFF)
Note: The communication format function is not performed for the model without the
communication function.
Run mode
Communication Format Function Selection Mode
■
9
Multifunction LCD Digital Timer
Key Protection Setting Mode
Power ON
Note: the forecast setting value is not changed if the mode is
switched to K/P setting mode and returned to Run Mode
during operation.
When key protection switch is set to ON, it is
possible to prevent setting errors by prohibiting
the use of certain operation keys by specifying
the key protection level (KP1 to KP-5). The key
protection indicator is lit while the key protection
switch is set to ON.
See note
3s min.
See note
3s min.
K/P ON
Setting mode
K/P OFF
Setting mode
Run Mode
K/P Setting Mode
Level Meaning Changing mode
(see note)
Switching display
during operation Reset key Up/down key
KP- 1
(default setting) No Yes Yes Yes
KP- 2 No Yes Yes Yes
KP- 3 No Yes Yes No
KP- 4 No Yes No No
KP- 5 No No No No
Note: Changing mode to Timer/Twin Timer/2-Stage Timer selection mode ( 3 min.), Communication
Format Function Mode( 3min.),and Basic Function setting ( 3s min.)
■
Este manual sirve para los siguientes modelos
16
Tabla de contenidos
Otros manuales de Minutero de Array electronic
