Ariston NIV 320B Manual de usuario
1
NIV 320B lnduction Hob Instruction Manual
2
CONTENTS
IMPORTANT SAFETY INSTUCTIONS
p.3-8
SAFEGUARDING THE ENVIRONMENT
p.8
BEFORE USE
p.8
COOKWAVE
p.8
DESCRIPTIONS OF PRODUCT
p.9
DESCRIPTIONS OF CONTROL PANEL
p.10
INSTALLATION
p.10
ELECTRICAL CONNECTION
p.12-13
INSTRUCTIONS FOR USE
p.13-16
CLEANING
p.17
TROUBLESHOOTING GUIDE
p.17
POWER LEVEL TABLE
p.18
3
IMPORTANT SAFETY INSTUCTIONS
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE USING
YOUR APPLIANCE, AND KEEP IT IN A CONVENIENT PLACE FOR REFERENCE
WHEN NECESSARY.
THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON. YOUR
APPLIANCE MAY NOT HAVE SOME OF THE FEATURES THAT ARE EXPLAINED IN
THIS MANUAL. PAY ATTENTION TO THE EXPRESSIONS THAT HAVE FIGURES,
WHILE YOU ARE READING THE OPERATING MANUAL.
General Safety Warnings
- This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
-WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements. Children less than 8 years of age shall be kept away
4
unless continuously supervised.
-WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire. NEVER try to extinguish a fire
with water, but switch off the appliance and then cover flame e.g.
with a lid or a fire blanket.
-WARNING: Danger of fire: do not store items on the cooking
surfaces.
-WARNING: If the surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
- For induction hobs, metallic objects such as knives, forks,
spoons and lids should not be placed on the hob surface since
they can get hot.
- For induction hobs, after use, switch off the hob element by its
control and do not rely on the pan detector.
- For hobs incorporating a lid, any spillage should be removed
from the lid before opening. And also the hob surface should be
allowed to cool before closing the lid.
- The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
5
- Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the oven door glass and other surface since they can
scratch the surface, which may result in shattering of the glass or
damage to the surface.
- Do not use steam cleaners for cleaning the appliance.
- Your appliance is produced in accordance with all applicable local and international
standards and regulations.
- Maintenance and repair work must be made only by authorized service technicians.
Installation and repair work that is carried out by unauthorized technicians may
endanger you. It is dangerous to alter or modify the specifications of the appliance in
any way.
- Prior to installation, ensure that the local distribution conditions (nature of the gas and
gas pressure or electricity voltage and frequency) and the requirements of the appliance
are compatible. The requirements for this appliance are stated on the label.
- CAUTION: This appliance is designed only for cooking food and is intended for indoor
domestic household use only and should not be used for any other purpose or in any
other application, such as for non-domestic use or in a commercial environment or
room heating.
- All possible security measures have been taken to ensure your safety. Since the glass
6
may break, you should be careful while cleaning to avoid scratching. Avoid hitting or
knocking on the glass with accessories.
- Ensure that the supply cord is not wedged during the installation. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to prevent a hazard.
Installation Warnings
- Do not operate the appliance before it is fully installed.
- The appliance must be installed by an authorized technician and put into use. The
producer is not responsible for any damage that might be caused by defective
placement and installation by unauthorized people.
- When you unpack the appliance, make sure that it is not damaged during
transportation. In case of any defect; do not use the appliance and contact a qualified
service agent immediately. As the materials used for packaging (nylon, staplers,
styrofoam...etc) may cause harmful effects to children, they should be collected and
removed immediately.
- Protect your appliance against atmospheric effects. Do not expose it to effects such as
sun, rain, snow etc.
- The surrounding materials of the appliance (cabinet) must be able to withstand a
temperature of min 100°C.
7
- The temperature of the bottom surface of the hob might rises during the operation.
Therefore, a board must be installed underneath the product.
During usage
- Do not put flammable or combustible materials, in or near the appliance when it is
operating.
- Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on
condition of extreme heating. Never pour water on to flames that are caused by oil.
Cover the saucepan or frypan with its cover in order to choke the flame that has occured
in this case and turn the cooker off.
- Always position pans over the centre of the cooking zone, and turn the handles to a
safe position so they cannot be knocked or grabbed.
- If you will not use the appliance for a long time, plug it off. Keep the main control
switch off. Also when you do not use the appliance, keep the gas valve off.
- Make sure the appliance control knobs are always in the "0" (stop) position when it is
not used.
During cleaning and maintenance
- Always turn the appliance off before operations such as cleaning or maintenance. You
can do it after plugging the appliance off or turning the main switches off.
- Do not remove the control knobs to clean the control panel.
8
TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE RECOMMEND
YOU ALWAYS USE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED
SERVICE AGENTS IN CASE OF NEED.
SAFEGUARDING THE ENVIRONMENT
Scrapping the product
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product.
Energy saving tips
For optimum results, it is advisable to:
-Use pots and pans with bottom width equal to that of the cooking zone.
-Only use flat-bottomed pots and pans.
-When possible, keep pot lids on during cooking.
-Use a pressure cooker to save even more energy and time.
-Place the pot in the middle of the cooking zone marked on the hob.
BEFORE USE
IMPORTANT: The cooking zones will not switch on if pots are not the right size. Only use pots
bearing the symbol “INDUCTION SYSTEM”. Place the pot on the required cooking zone before
switching the hob on.
COOKWAVE
-Use thick cookware with flat and smooth bottom. Cookware with same diameter as the
cooking zone will help reduce cooling times.
-Cookware made of enameled steel or aluminum or copper bottoms can cause a metallic
residue on the glass. Clean the hob after every use.
-Use a magnet to check if the pot is suitable for the induction hob: pots and pans are
unsuitable if not magnetically detectable.
-Cookware must be placed centrally on the cooking zone in order to work property.
-When using certain pans, you may get various noises from the pans, this is due to the
design of the pans and does not affect the performance or safety of the hob.
9
-The minimum cookware diameter that elements can detect are Q110mm for 160mm -
210mm hobs and Q160mm for 290mm hob. Cooking performance improves with the
increase of the diameter.
DESCRIPTIONS OF PRODUCT
Induction heating element
Control panel
10
DESCRIPTIONS OF CONTROL PANEL
INSTALLATION
After unpacking the product, check for any damage during transport. In the event of problems,
contact the dealer or the Whirlpool After-Sales Service.
- The electrical connection of this hob must be carried out by qualified
technician, according to the instructions in this user manual and in
compliance with the local regulations. In the event of any damage that
occurs as a result of improper connection or installation, the warranty will
not be valid.
- This appliance must be earthed.
Installation Safety
- Cookerhood needs to be installed at least 65cm above the hob.
- Extractor fans must be fitted in accordance with the manufacturer’s instructions.
- The wall in contact with the rear of the hob must be made of flameproof material.
Fitting the hob into a work surface
- The hob can be inserted into any worktop provided it is heat resistant up to at least 90°C.
- Induction hob may be built in 25 to 40mm thick worktops.
- Create an opening with the dimension shown in the pictures below.
Otros manuales para NIV 320B
1
Tabla de contenidos
Otros manuales de Quemador de Ariston
Ariston
Ariston PKL 641 D2 Manual de usuario
Ariston
Ariston NIA 641 B Manual de usuario
Ariston
Ariston KIB 644 C E IT Manual de usuario
Ariston
Ariston NIV 320B Manual de usuario
Ariston
Ariston PF750AST Manual de usuario
Ariston
Ariston PCN642IX/A Manual de usuario
Ariston
Ariston HT 60 XA Manual de usuario
Ariston
Ariston PK 644D GH X LPG Manual de usuario
Ariston
Ariston KZT 6424 T F Manual de usuario
Ariston
Ariston PH 960 T GH AUS Manual de usuario
Ariston
Ariston PHN 962 TS/IX/A Manual de usuario
Ariston
Ariston 7HKEC 647 X RU Manual de usuario
Ariston
Ariston NRA 640 E B Manual de usuario
Ariston
Ariston 7HPC 640/HA Manual de usuario
Ariston
Ariston PHN 932 T2/IX/A Manual de usuario
Ariston
Ariston NRA 640 C AUS Manual de usuario
Ariston
Ariston PK 640 R GH AUS Manual de usuario
Ariston
Ariston NIO 844 DO B AUS Manual de usuario
Ariston
Ariston 70 Series Manual de usuario
Ariston
Ariston NRA 640 B Manual de usuario
