ArcVision ARC-1493DR Manual de usuario
USER MANUAL
HI-RES. OSD CAMERA
Contents
1. SAFETY PRECAUTIONS.................................................................................. 2
2. INTRODUCTION............................................................................................... 3
3. FEATURES ......................................................................................................... 4
4. PACKAGE LIST ................................................................................................. 5
5. NAME and FUNCTION of EACH PART .......................................................... 6
6. INSTALLATION................................................................................................. 8
6.1 Native Keyboard Installation................................................................... 9
6.2 PELCO Keyboard (or compatible) Installation....................................... 9
7. OPERATION..................................................................................................... 10
7.1 Operating Procedure.............................................................................. 10
7.2 Native Keyboard Operation................................................................... 10
7.3 PELCO Keyboard (or compatible) Operation....................................... 11
8. SYSTEM SETUP .............................................................................................. 12
8.1 OSD (On Screen Display) Main Menu Description................................... 12
8.2 Sub Menu Description........................................................................... 13
9. CAMERA CONTROL PROTOCOL ................................................................ 19
10. SPECIFICATION ............................................................................................ 22
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information herein.
1
VER.: 1.0, P/N: 040117/2
1. SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN!
CAUTION :
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT OPEN COVERS (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
It is advised to read the Safety Precaution Guide through carefully before operating the
product, to prevent any possible danger.
WARNING: Alert the user to the presence of un-insulated “dangerous voltage”.
CAUTION: Alert the user the presence of important operating and maintenance
(Servicing) instructions in the literature accompanying the appliance.
Please be extra careful not to shake the product.
Please avoid places where frequent vibrations or shocks.
Do not install the product in extreme temperature conditions.
Only use the camera under conditions where temperatures are between -10℃and +50℃.
Be especially careful to provide ventilation when operating under high temperatures.
Do not install the product in an environment where the humidity is high.
Unless the product is waterproof or weatherproof, otherwise it can cause the image quality
to be poor.
Never keep the product to direct strong light or sunlight.
It can damage the product.
Do not spill liquid of any kind on the product.
If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that
corrode the electronic components.
When any abnormal occurs, make sure to unplug the unit, and contact your local dealer.
2
2. INTRODUCTION
This digital image camera uses a high sensitive color 1/3” interline transfer Charge
Coupled Device (CCD) image sensor, featuring approx.: NTSC = 380,000/ PAL = 440,000
effective pixels, producing pictures reaching 550 TVL of horizontal resolution.
Built-in ICR module provides excellent low lux effect. Remote control is available via
RS-485/ RS-422 or RS-232 (optional) interface.
3
3. FEATURES
High sensitivity, low smear, high anti-blooming, and high S/N ratio.
Mechanic IR cut-filter driving unit with AE/ Illumination Detector (sensor),
provides change from color to B&W mode automatically for day and night
24-hour surveillance.
OSD (On Screen Display) Setup Menu.
Camera tile setup of up to 16 alphanumeric letters.
Privacy image masking with free position.
Camera control via either RS-422/RS485 or RS232 interface.
Supports PELCO (D and P) Protocol/ NATIVE Protocol/ LG Protocol.
Supports AES (Automatic Electronic Shutter), AI ( Auto Iris), GC (Gain
Control), WB (White Balance), and BLC (Back Light Compensation).
Provides flickerless mode, color rolling suppression, and line-lock function.
The camera accepts 2 types of auto iris lenses Video type (Video-Drive) and DC
type (DC-Drive).
Performance: Positive/ negative image, mirror function (left/ right).
Under low lux environment camera with Hi-Res.+ Ex-view function has better
ability to work in low-light conditions (more sensitive to light) than camera
with Hi-Res. function.
4
4. PACKAGE LIST
Check and make sure all the items shown below are included in your product package.
If something is missing, contact your dealer as soon as possible.
No. Item Picture Quantity
1 Camera
1
2 Manual
1
3
Auto Iris Lens Plug
Mounting Block
Fixed Screws
L-Wrench
1
5
5. NAME and FUNCTION of EACH PART
Side View
Front View
Rear View
6
1. Video Output: Composite Video 1Vp-p, 75 Ohms, BNC.
Function
2. Key Control:
No. Name
1 SUp (S)
2 T(T)Down
3 (+)/►Increase Value (＋)
4 (-)/◄Decrease Value (－)
5 Menu Enter or Exit Setup Menu
3. rotocol / NATIVE/ PELCO
e Function
P : AUTO / LG
4. Baud Rates: 2.4K/ 4.8K/ 9.6K/ 19.2K BPS
RS-232:
No. Nam
1 RX RS-232 Interface RX
2 GND GND
3 TX RS-232 Interface TX
4 GND GND
S-485/ RS-422:
e Function
R
No. Nam
1 R+ RS-485/RS-422 Interface R+
2 R- RS-485/RS-422 Interface R-
3 T+ RS-485/RS-422 Interface T+
4 T- RS-485/RS-422 Interface T-
7
6. INSTALLATION
1
2
3
RD
TD
GND
1
2
3
4
5
6
7
8
9
1 Frame GND
2 RD
3 TD
4 DTR
5 Signal GND
6 DSR
7 RTS
8 CTS
9 RI
Camera
RS-232 Interface
RS-232C D-Sub Connector
4
GND
Figure 6-1
1
2
3
4
R+
T-
T+
R-
R+
R-
T+
T-
Camera
RS-422 Interface 232 to 422 Converter
RD
TD
To PC or
Controller
Figure 6-2
1
2
3
4
R+
T-
T+
R-
D+
D-
Camera
RS-485 Interface 232 to 485 Converter
RD
TD
To PC or
Controller
D-
D+
Figure 6-3
8
6.1 Native Keyboard Installation
RS-485 interface is used for communicating native keyboard. Refer to Figure
only be adjusted
tion Setting
6-3; connect R+ and T+ of the camera together; connect R+ and T+ of the
camera to D+ of the native keyboard. Connect R- and T- of the camera together;
connect R- and T- of the camera to D- of the native keyboard.
User may adjust Camera ID, Protocol, Speed and Parity should
via rear panel keys.
Communica
CAMERA ID 1 - 127
PROTOCOL AUT VEO/ NATI
SPEED 9600
PARITY NONE
The speed of native keyboard is fixed (9600), and the adjusted function is only effective,
.2 PELCO Keyboard (or compatible) Installation
gure
r panel keys or via remote commands.
after exiting the OSD setup menu.
6
RS-422 interface is used for communicating PELCO keyboard. Refer to Fi
6-2; connect R+ of the camera to T+ of the PELCO keyboard. Connect R- of the
camera to T- of the PELCO keyboard.
User may adjust Camera ID via rea
Protocol, Speed and Parity should only be adjusted via rear panel keys.
Communication Setting
0 - 25 tocol3 for P pro
CAMERA ID 1 - 255 for D protocol
PROTOCOL AUTO/ PELCO
SPEED 2400/ 4800/ 9600/ 19200
PARITY NONE
The speed of c ould be the same as the speed of the keyboard, and the
NOTE: Maximum cable distance for RS-422/ RS-485 communication over 24-gauge
amera sh
adjusted function is only effective, after exiting the OSD setup menu.
wire is 4,000 feet (1,219 m). Recommend using shielded twisted pair cable that meets
the basic requirements for EIA RS-422 / RS-485 applications.
9
Tabla de contenidos
Otros manuales de Cámara de seguridad de ArcVision
