ArcTiv Technologies Server Racks Manual de usuario
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
1
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
USER MANUAL
SERVER RACKS
NETWORK RACKS
Server & Network Racks
™
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
2
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
TABLE OF CONTENTS
PRODUCT OVERVIEW ……………………………………………………………………………………………………………………………………….
3
SAFETY INSTRUCTIONS …………………………………………………………………………………………………………………………………….
4
COMPONENT IDENTIFICATION ………………………………………………………………………………………………………………………..
5
PACKAGING …………………………………………………………………………………………………………………..………………………………..
6
ASSEMBLY ……………………………………………………………………………………………………………………………………………………….
7
CONFIGURATION ……………………………………………………………………………………………………………………………..……………..
11
WARRANTY ..………………………………………………………………………………………………………………………….………………………..
12
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
3
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
PRODUCT OVERVIEW
ArcTiv Server and Network Racks offer greater capacity, load rating and cable & airflow accessories to manage your
critical IT systems. The Server Racks are compatible with ArcTiv Aisle Containment and PDU’s for fast installation
and reliable operation. The key features of the product line include:
Curved Door with
130oRadius
Heavy Duty Castors &
Leveling Feet
Multi-Bay
Compartments
Server Racks
Split Locking
Side Panels
High Airflow, Vented
Locking Doors
Adjustable
Mounting Rails
Top Cable Entry
Access Holes
Tool-less iPDU
Mounting
Network Racks
Vertical Cable
Management
Network & Power
Cable Separation
750 & 800mmW
Options
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
4
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
SAFETY INSTRUCTIONS
•Keep the Server Racks in a controlled indoor environment, away from moisture, temperature extremes,
flammable liquids and gasses, conductive contaminants, dust and direct sunlight.
•Leave adequate space at the front and rear of the racks for proper ventilation. Do not block, cover or insert
objects into the external ventilation openings of the enclosure.
•The Server and Network Racks are heavy, use caution when handling. Do not attempt to unpack, move or
install it unassisted. Use a mechanical device such as a forklift or pallet jack to move the system in the shipping
container.
•Do not place any object on the enclosures, especially containers of liquid, and do not attempt to stack the
enclosures.
•Inspect the shipping container and the enclosure for shipping damage. Do not use the system if it is damaged.
•Leave the Server and Network Racks in the shipping container until it has been moved as close to the final
installation location as possible.
•Install the enclosures and containment system in a structurally sound area capable of handling the load, or on
a level floor that is able to bear the weight of the enclosure, all equipment that will be installed in the
enclosure and any other enclosures and/or equipment that will be installed nearby.
•Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered
by the warranty.
•Save all packing materials for later use. Repacking and shipping the enclosures and containment system
without the original packing materials may cause product damage that will void the warranty.
•Do not reship the enclosures and containment with additional equipment. The combined weight of the
enclosure and installed equipment must not exceed the load capacity of the pallet. ArcTiv Technologies is not
responsible for any damage that occurs during reshipment.
•The enclosure casters are designed for minor position adjustments within the final installation area only. The
casters are not designed for moving the enclosure over longer distances.
•When rolling the enclosure on its casters, always push it from behind; never pull it toward you.
•A rolling enclosure can cause personal injury and property damage if not properly supervised. If rolling the
enclosure down a ramp is required, use extreme caution. Do not attempt to use ramps that have a slope
steeper than 1:12.
•Use of this equipment in life support applications where failure of this equipment can reasonably be expected
to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not
recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen
or nitrous oxide.
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
5
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
COMPONENT IDENTIFICATION
Item
Component
Quantity
1
Front vented door with lock
1
2
Rear door
2
3
Top cover
1
4
Side panel
4
5
Vertical rail
4
6
Horizontal beam
6
7
Cable management rail
2
8
Door frame
2
9
Leveling feet
4
10
2” heavy duty castor
4
Important: Bottom Plate Installation Instruction (Optional)
It is better to install the optional bottom plate during steps 4 and step 5. Secure the bottom plate to the corner
bracket with M4*8mm self-tapping screws (4pcs), the bottom plate is tightened to the enclosure with M8*25mm
hexagon headed bolt.
Note: Refer to the mounting instructions
before installing the bottom plate.
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
6
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
PACKAGING
The flat-pack concept allows shipped enclosures to reduce
space, which can save container and transportation costs.
CARTON A -19" FRONT & REAR DOOR KITS
Carton A
Parts List
Quantity
(1)
Front door assy
1
(2)
Top cover
1
(3)
Rear doory assy
1
(4)
Bottom plate
1
CARTON B-19" RAILS & BEAM KITS
Carton B
Parts List
Quantity
(5)
Horizontal beam
1
(6)
Vertical rail, left
1
(7)
Cable mgmt. rail
1
(8)
Vertical rail, right
1
CARTON C-19" SIDE PANELS KITS
Carton C
Parts List
Quantity
(9)
Side panel assy
1
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
7
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
ASSEMBLY
Step 1: Connect corner brackets to the lower beams with 2 screws.
Step 2: Connect each of 6 beams to the rear door with 2 screws.
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
8
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
Step 3: Fasten each of 6 beams in Step 2 to the front door with 2 screws
Step 4: Fasten corner brackets in Step1 to the front with 2 screws
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
9
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
Step 5: Install the cage nuts to the required square openings in the mounting beams, one for each beam where you
plan to install the cable management rails. Use M6 washers and mounting screws to secure the cable management
rails, one for each side. Place M6 washers between the screws and the equipment mounting rails.
Step 6. Install the cage nuts to the desired square openings as step 5. Fasten the rails to the mounting beams with
3 screws and M6 washers, two rails for each side.
USER MANUAL: ARCTIV SERVER & NETWORK RACKS
10
© 2021 ArcTiv Technologies, LLC ATSVR-NWR-MANUAL-01
Step 7. While holding the top cover, arrange the 2 pins near the rear of the top cover into the holes in the enclosure
frame. Pull the roof panel downward until it’s close to the enclosure frame.
Step 8. Open side panel latch by sliding it downward, then install side panels into the frame.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
