Arbor Technology PC1015 Manual de usuario
I
2017.07
PC1015
10.1” Price Checking Terminal
User's Manual
Version 1.1
P/N: 4018101500110P
- II -
This page is intentionally left blank.
- i -
Revision History
Version Release Time Description
1.0 2017.03 Initial release
1.1 2017.07
1.5 Specifications: Update LCD display section
2.2 Connection: Add notes about not to use PoE
and DC power at the same time.
- ii -
Copyright
Copyright © 2017 ARBOR Technology Corp. All Rights Reserved.
This document contains proprietary information protected by copyright. No
part of this manual may be reproduced by any mechanical, electronic, or other
means in any form without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
About This Manual
This user’s manual provides the general information and installation
instructions for the product. The manual is meant for the experienced users
and integrators with hardware knowledge of personal computers. If you are not
sure about any description in this manual, consult your vendor before further
handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing ARBOR
products.
- iii -
Contents
Contents
Preface..........................................................................................................iv
Declaration of Conformity .....................................................................................iv
CE..................................................................................................................iv
FCC ...............................................................................................................iv
RoHS .............................................................................................................iv
SVHC / REACH ..............................................................................................v
Symbols Descriptions ...........................................................................................vi
Important Safety Instructions................................................................................vi
General Cleaning Tips ........................................................................................ viii
Cleaning Tools ...............................................................................................ix
Recommended Cleaning Procedures............................................................ix
Disposing of the Equipment...................................................................................x
Additional Information & Technical Support ..........................................................xi
Warranty .............................................................................................................. xii
Chapter 1 Introduction................................................................................1
1.1 Product Highlights............................................................................................2
1.2 Package Contents ...........................................................................................2
1.3 Ordering Information........................................................................................2
1.4 Dimensions......................................................................................................3
1.5 Specications...................................................................................................4
1.6 Barcode Scanner Specications......................................................................6
Chapter 2 Getting Started...........................................................................7
2.1 Getting to Know the Terminal...........................................................................8
2.2 Connection.......................................................................................................9
2.3 Attaching to a VESA Mount............................................................................12
2.4 Powering on/off the Terminal .........................................................................13
Chapter 3 Using the Terminal...................................................................15
- iv -
Preface
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from ARBOR. Please contact
your local supplier for ordering information.
FCC
This device complies with Part 18 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modications not expressly approved by the guarantee of this
device could void the user’s authority to operate the equipment.
RoHS
ARBOR Technology Corp. certies that all components in its products are
in compliance and conform to the European Union’s Restriction of Use
of Hazardous Substances in Electrical and Electronic Equipment (RoHS)
Directive 2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main purpose
of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that
exceed a maximum concentration value of 0.1% by weight or for cadmium
Preface
- v -
Preface
exceed 0.01% by weight, per homogenous material. Homogenous material
is dened as a substance or mixture of substances with uniform composition
(such as solders, resins, plating, etc.). Lead-free solder is used for all
terminations (Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the
earth we live, ARBOR hereby conrms all products comply with the restriction
of SVHC (Substances of Very High Concern) in (EC) 1907/2006 (REACH
--Registration, Evaluation, Authorization, and Restriction of Chemicals)
regulated by the European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)
- vi -
Preface
Symbols Descriptions
The tables below describe the symbols that may appear in the product.
This symbol of “CAUTION”indicates that there is a danger
of injury to the user or a risk of damage to the product,
should warning notices be disregarded.
This symbol indicates electrical warning.
Refer to the user manual for more information.
Important Safety Instructions
Read these safety instructions carefully:
1. Read all cautions and warnings on the equipment.
2. Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage
3. Make sure the correct voltage is connected to the equipment.
4. To avoid risk of electric shock, this equipment must only be connected to a
supply mains with protective earth.
5. For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
6. Keep this equipment away from humidity.
7. Disconnect this equipment from the A/C outlet before cleaning it. Use a
moist cloth. Do not use liquid or sprayed detergent for cleaning.
8. To fully disengage the power to the unit, please disconnect the power from
the AC outlet.
9. Do not scratch or rub the screen with a hard object.
10. Never use any of the solvents, such as Thinner Spray-type cleaner, Wax,
Benzene, Abrasive cleaner, Acid or Alkaline solvent, on the display. Harsh
chemicals may cause damage to the cabinet and the touch sensor.
- vii -
Preface
11. Remove dirt with a lightly moistened cloth and a mild solvent detergent.
Then wipe the cabinet with a soft dry cloth.
12. The openings on the enclosure are for air convection and protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
13. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
14. If the equipment will not be used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
15. Never pour any liquid into openings. This may cause re or electrical
shock.
16. Never open the equipment. For safety reasons, the equipment should be
opened only by qualied service personnel.
17. No modication of the equipment is allowed.
18. Only personnel authorised by the manufacturer may carry out technical
operations on the equipment.
19. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
17. The sound pressure level at the operator’s position, according to IEC 704-
1:1982, is no more than 70dB(A).
18. Keep this User’s Manual for later reference.
19. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW
-20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE
EQUIPMENT.
- viii -
Preface
Do not use the power adapter that isn’t made for the equipment.
Supplying the equipment with inappropriate voltage may cause harm to
the battery (if any) or, even worse, burn the equipment.
Risk of explosion if RTC (Real-Time Clock) battery is replaced by an
incorrect type. Dispose of used batteries according to the instructions.
To prevent possible hearing damage, do not listen at high volume
levels for long periods
General Cleaning Tips
You may need the following precautions before you begin to clean the device.
When you clean any single part or component for the device, please thoroughly
read and understand the details below.
1. We strongly recommended that you should shut down the system before
you start to clean any single components.
2. When you need to clean the device, please rub it with a piece of dry cloth.
3. Be cautious of the tiny removable components when you use a vacuum
cleaner to absorb the dirt on the oor.
4. Never drop the components inside the device or get circuit board damp or
wet.
5. Be cautious of all kinds of cleaning solvents or chemicals when you
use it for the sake of cleaning. Some individuals may be allergic to the
ingredients.
6. Try not to put any food, drink or cigarette around the device.
Tabla de contenidos
Otros manuales de Terminal táctil de Arbor Technology
