apivio MWP1100N Manual de usuario
VoIP MWP1100N
User Manual
2
Basic Instructions
Basic Instructions
Please read the instructions carefully to protect yourself and others
from personal injury or damage to property.
User Precautions
· Please avoid installing in excessively hot, cold, dusty or humid
places.
· Please avoid exposure to strong vibrations or direct sunlight.
· Because the phone generates heat when it operates, please do
not install it in locations with low heat tolerance.
· To prevent fire or risk of electric shock, please do not use with a
damaged cord or plug, or touch the power outlet with wet hands.
· Please do not place on an unstable surface to avoid injury or
breakage if dropped or fallen.
Precautions when installing
· Please do not touch the phone with wet hands.
· Please do not use the phone for other than its intended purpose.
· Please do not pull on the power plug and adapter when unplugging
the phone.
· If the phone emits an unusual noise or smell, or if you see smoke
coming from the phone, please unplug the adapter and cable
immediately.
· Please do not place the phone in an area that is wet or dusty.
· Please do not place anything heavy on top of the phone.
· Please do not put any foreign material inside the product or charger.
· Please do not place the phone near or in areas of extreme heat,
such as in direct sunlight or beside a heater.
· Please do not place the product close to magnetic objects such as a
magnet, TV, monitor or speaker.
· Please back up your valuable data on the phone, as a precaution.
· Please note that the phone and battery can get heated up during a
lengthy call.
· Do not modify or disassemble the phone, or use any other
manufacturer's firmware to upgrade the phone.
· Failure to comply with the precautions in this section will void any
applicable warranty.
Precautions when using
· Please use a dry, soft cloth when you clean the phone.
· Please do not use harsh chemicals such as benzene or thinner to
clean the phone.
· Please wipe the power plug with a dry, soft cloth if it is wet or
dusty, as this may be a fire or electric shock hazard.
Precautions when cleaning
3
Basic Instructions
Basic Instructions
User Precautions
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population.
The guidelines are based on safety standards previously set by both
U.S. and international standards bodies:
· American National Standards Institute (ANSI) IEEE. C95.1-1992.
· National Council on Radiation Protection and Measurement (NCRP).
Report 86.1986.
· International Commission on Non-Ionizing Radiation Protection
(ICNIRP) 1996.
· Ministry of Health(Canada). Safety Code 6.
The standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phone employs
a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC is 1.6W/kg.
FCC SAR Compliance Statement
· Please don’t use this phone with a battery from another
manufacturer, as this could damage the device.
· Replace the battery if it appears swollen, as there is a risk of
explosion.
· Use only the specified manufacturer's charger to charge the
phone.
· Keep the phone and battery away from children and pets.
· Do not place the phone or battery near firearms or unlicensed radio
products.
· Do not submerge the phone or get the battery wet.
· Do not store or use the phone inside a car during the summer, or
in steam rooms, or other areas with high temperature and humidity.
· Do not continuously use the phone for long periods of time.
· Do not place the phone directly on blankets, electric blankets, or
carpeted areas.
· Do not allow metallic objects to come into contact with the battery
terminals.
· Do not disassemble, crush, or puncture the phone or battery, as
there is a risk of explosion and electric shock.
· Do not incinerate the battery. Dispose of it or recycle it in
accordance with local regulations.
· Normal battery life should continue for at least 6 months from date
of purchase.
· Before first time use, and after using the phone for a long period
of time without charging, please charge the battery fully by placing
the phone in the cradle.
Precautions when using battery
4
Basic Instructions
Basic Instructions
User Precautions
· This device is for indoor use, only in the 5150~5250Mhz frequency
range.
· This device was tested for typical body-worn operations.
· To comply with RF exposure requirements, keep at least 1.5cm (0.5
inches) between the user's body and the headset, including the
antenna.
· Do not use third-party belt clips, holsters, or other accessories that
contain metallic components.
· Avoid use of body-worn accessories that do not meet the above
criteria, as they may not comply with RF exposure requirements.
‧ User manual specifications and the IP Phone software version may
be changed by the manufacturer without any notice.
Warnings
5
Basic Instructions
Basic Instructions
Contents
Components ..................... 06
HD Voice Features ............. 06
About the Phone ............... 07
LCD Status ....................... 08
Insert the Battery ............... 09
Install the Adapter .............. 09
Wi-Fi connection ............... 10
Basic Instructions
Useful Functions ................ 15
Display .............................. 17
Setting .............................. 18
System info ....................... 19
Extra Functions
Troubleshooting ................. 20
Treatment before
Disposal ............................ 21
Warranty ............................ 21
Damage Compensation .... 22
Specifications .................... 23
Supplements
Make a Call / Hang Up ..... 11
Answering a call ................ 11
Call History ........................ 11
Transfer ............................. 12
Pick Up ............................. 12
Mute ................................. 12
Adjust Volume ................... 12
Ring Type .......................... 12
Phone Book ...................... 12
CFA ................................... 13
Message ........................... 14
Basic Functions
User Precautions ................ 02
6
Basic Instructions
Basic Instructions
6
Please check to ensure the components pictured below
are in the box after purchase. Please contact the retail
store where you purchased the device, if there are any
missing items.
Components
·This device uses high-end speakers and receivers to
support HD Voice capability.
·This device deploys HD Voice clarity similar to an HD TV.
·This device outputs a higher voice quality than the
standard Internet phone.
HD Voice Features
<Voice quality comparison between standard phone voice technology,
and HD Voice technology>
Battery User manualPower adapter
Body Charger
7
Basic Instructions
Basic Instructions
7
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Volume : Adjust the sound volume.
Menu : Access the phone menu.
Search : Search your registered Wi-Fi networks.
Wireless line : Search Wi-Fi networks.
Phone book : Access the phone book.
System info : Access system information.
Message : SMS (Texting is not supported at this time).
OK : Select the item.
Mute : Mute your current call.
Back : Cancel the selected item or return to the previous menu.
Call : Receive or end a call.
End : Power on/off.
Number/ Text : Input numbers or text.
#/Lock : Long press the [#] button to lock/unlock the keypad.
Pick up : Pick up a call from another phone on your account.
Transfer : Transfer to another phone on your account.
About the Phone
8
Basic Instructions
Basic Instructions
Time, Date
Indicates the time and
date.
LCD Status
Left menu
Press to run
the menu.
Status Icon
Indicates phone status.
Please refer to the icon
legend on the right, for
details.
Right menu
Press to search the phone
book to search contacts.
Indicates battery status.
Fully charged Good Poor Charge
Indicates the battery is charging, and the charging status.
Indicates the phone call function is unavailable.
Indicates the phone call function is available.
Indicates the alarm has been set.
Indicates you have unread messages.
Indicates the answering machine function has been set.
Indicates that the phone is in locked mode.
Strong signal Weak signal
Indicates Wi-Fi signal strength.
9
Basic Instructions
Basic Instructions
Connect the adaptor
to the rear connector.
Connect the charger plug into a power outlet.
Place the Wi-Fi phone
on the charging cradle
to charge.
Please use the included battery. If you need to exchange
or purchase another battery, please contact an authorized
service centre.
(1)
Push down on the battery cover,
as shown at left, and
pull down (2) to separate.
Insert the battery with the
charging pins aligned with
the grooves (1) and push
down on (2).
Replace the battery cover
bottom first, at (1) direction
and push down, sliding up
toward (2) until you hear a
click.
Install the adaptorInsert the battery
Push
Pull
Fit up
Push
Pull
Fit up
You can check the charging status with the indicated
icon on the top display.
10
Basic Functions
Select the desired
network, Press [OK],
and enter applicable
password.
You will be connected
and can begin using
your device.
Wi-Fi Connection
Press and hold the [End]
button for 3 seconds to
power on the phone.
Press to search
for available Wi-Fi
connections
Tabla de contenidos
Otros manuales de Teléfono IP de apivio
