Apex Tool Group Cleco Torque Analyzer Manual de usuario
Operators Manual
P2599BA-EN
2022-10
TORQUE ANALYZER
1
P2599BA-EN | 2022-10
Apex Tool Group
2
3
4
5
5
6
7
8
8
9
9
11
12
12
13
14
15
16
17
18
CONTENTS
Table of Contents
Compliance
About this Manual
Packing list
Spares & Accessories
Features & Dimensions
Specifications
Hardware
Technical Features
Icons
Start Up
Fixed Icons
Input
Powering your Torque Analyzer
Measurement Screen
Deletion
Settings
AutoPrint Settings
Readings List
Statistics
2
P2599BA-EN | 2022-10
Apex Tool Group
This can be used on all the Cleco tightening tools, except impact wrenches.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
particular installations. If this equipment does cause harmful interference to radio or television reception
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
INTENDED USE
COMPLIANCE
Changes or modifications to the Cleco Torque Analyzer not expressly approved byCleco Production Tools
could void the user’s authority tooperate the equipment.
3
P2599BA-EN | 2022-10
Apex Tool Group
ABOUT THIS MANUAL
Copyright © Apex Tool Group, 2022
No part of this document may be reproduced in any way or in any form, in whole or in part, or in a natural or machine-readable
language, or transmitted on electronic, mechanical, optical, or other media, without the express permission of the Apex Tool Group.
Disclaimer
Apex Tool Group reserves the right to modify, supplement, or improve this document or the product with-out prior notice.
Trademark
Cleco Production Tools is a registered trademark of Apex Brands, Inc.
Manufacturer
Apex Tool Group
670 Industrial Drive
Lexington, SC 29072
USA
Crane Electronics Ltd
3 Watling Drive
Sketchley Meadows
Hinckley, Leicestershire LE10 3EY
Importer
Apex Tool Group GmbH
Industriestraße 1
73463 Westhausen
Germany
Manuals, brochures and other product materials are available for download at www.ClecoTools.com.
This manual covers the Cleco Torque Analyzer.
Actual screen shots represented in this manual may differ slightly from those on the actual torque tester unit,
depending on the version.
4
Apex Tool Group
4
P2599BA-EN | 2022-10
Apex Tool Group
The following Items are supplied with the Cleco Torque Analyzer dependent on model specification
purchased.
1 x Cleco Torque Analyzer (with standard rundown adapter)
1 x Calibration Certificate (12 months)
1 x Quick Start Guide
1 x Power Supply
3 x Regional Power Cords
All contents are supplied packaged in a box.
Please ensure all items are present and notify Cleco immediately of any shortages.
PACKING LIST
SPARES ANDACCESSORIES
5
Apex Tool Group
5
P2599BA-EN | 2022-10
Apex Tool Group
FEATURES AND DIMENSIONS
6
Apex Tool Group
6
P2599BA-EN | 2022-10
Apex Tool Group
Measurement Modes:
Track – Real time torque
Peak – Capture of the highest torque
Pulse – Special measurement algorithm for use with impulse tools, incorporating pulse count
Click – Capture of peak torque before click mechanism operates to limit
Measurement Units:
Torque - Nm, lbft, lbin, Ncm, kgcm, kgm, ozin
Physical Measurements:
Auto Bi-directional torque; pulse count; cycle time duration.
Data Storage:
999 readings in storage mode.
Basic Statistics:
Count, range, mean, min, max, standard deviation.
AutoPrint / Data Output:
Easy selectable output to AutoPrint of all results. Interface to simple PC package that outputs the print data to
an Excel spreadsheet.
Cycle Status Indication:
LED HI/OK/LO torque status. User definable limits.
Operating Languages:
English, Czech, French, German, Italian, Hungarian, Spanish, Swedish, Polish, Turkish.
SPECIFICATIONS
7
Apex Tool Group
7
P2599BA-EN | 2022-10
Apex Tool Group
Construction:
High strength injection moulding. Steel base with mounting bars.
Display:
White OLED screen - 79mm x 21mm
Keypad:
Easy clean keypad. 11 keys including 5 function keys, 5 directional keys and on/off key.
Power:
Universal 5V PSU or USB.
Power Management:
User selectable auto power-off: User definable between 0-200 minutes.
Batteries:
Compatible with both Alkaline and NiMH “C” cells (LR14)
Input/output ports:
Micro USB (2.0) for power and export.
5V DC power port for use with mains power DC PSU.
Zero Stability:
<± 0.02% FSD/ °C.
Static Accuracy:
± 0.25% FSD.
Operating Environment:
Temperature: -20 to +50 °C.
Humidity 10-75% non-condensing.
Ingress protection rating: IP45.
Torque Measurement
Display up to 5 significant figures. Sample every 20 micro seconds.
Warranty:
12 months parts and labour against faulty workmanship or materials.
HARDWARE
TECHNICAL FEATURES
8
Apex Tool Group
8
P2599BA-EN | 2022-10
Apex Tool Group
Fixed soft-key Icons:
On-screen Icons - Measurement Modes:
Turning on your Torque Analyzer:
Turn on by pressing the On/Offbutton situated below the arrowed keypad.
The first screen you will see is as below.
ICONS
Peak
Click
Track
Pulse
START UP
Measurement
Modes
Delete
Readings
Statistics
Settings
9
Apex Tool Group
9
P2599BA-EN | 2022-10
Apex Tool Group
The screen will then change to:
It confirms the serial number of the Torque Analyer you have and its calibration due date. TMisthe
latest software version of the torque module and KB represents the latest version of the keyboard.
The unit will then enter measure mode, showing the last measurement mode used is automatically displayed.
10
P2599BA-EN | 2022-10
Apex Tool Group
Tabla de contenidos
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario