Apera Instruments LabSen 763 Manual de usuario

LabSen® 763 Blade Spear pH/Temp. Electrode

User Manual

LabSen® pH electrodes are made with proprietary sensor technologies and key components from

Switzerland. LabSen® 763 Blade Spear pH Electrode adopts a spear glass membrane with titanium blade

sheath, which can easily pierce into solid medium while protecting the sensor. This probe is designed for

pH measurement of raw/frozen meat and fish.

Features(

• LabSen® S-type spear sensor tip featured with high firmness and fast response, designed for

direct measurement of solid samples

• Built-in temperature sensor for automatic temperature compensation (ATC)

• Food-grade titanium blade sheath, easily piercing into hard samples while providing strong

protection to the sensor

• Open&Ceramic double-junction with Polymer electrolyte. No more junction clogs.

• Long life reference system improves the stability of the reference system and extends the

electrode’s service life.

• Blue gel inner solution - does not flow and will not generate air bubbles

Technical(Specifications(

Measuring Range

0 – 14 pH

Temperature Range

0 – 80 °C

Body Material

Food-Grade Titanium

Temperature Sensor

NTC 30KΩ

Reference

Long Life

Junction

Ceramic + Single Pore

Reference Solution

Polymer

Soaking Solution

3M KCL

Electrode Dimension

Electrode (Φ12×115) mm

Measuring Tip (Φ6×50) mm

Connector

BNC/RCA

Cable

Φ3×1m

How(to(use(

1. Insert the blue BNC connector of the electrode to the BNC socket of your pH

meter while twisting clockwise until it’s locked.

2. Insert the black RCA connector of the electrode to the RCA socket directly.

3. Before measuring, twist off the storage bottle cap (see graph on the right), pull

out the electrode and rinse it off with distilled or deionized water.

4. Perform at least a two-point calibration before measuring after connecting the

new electrode to your pH meter.

5. After using, put the electrode back into the storage bottle and twist on the

bottle cap.

Maintenance(

1. When not in use, the electrode should be soaked in the storage bottle containing 3M KCL soaking

solution to keep the glass membrane and junction in a healthy condition. Clean the bottle and replace

the soaking solution if it gets contaminated. The electrode should never be stored in pure water such

as deionized or distilled water.

2. The electrode is only as accurate as it is clean. Always thoroughly rinse off the probe before and after

each measurement with pure water in a container or with a wash bottle.

3. The transparent polymer gel electrolyte will inflate and ooze out a bit when it’s soaked in KCL solution.

This will not affect the measurement of the electrode, and it will happen more frequently with newer

electrodes. This is a “self-clean” situation especially when the junction gets contaminated. Just wipe

off the inflated gel with clean tissue and continue to use the electrode as normal.

4. When piercing meat (especially frozen meat), avoid bending the spear tip. Wash the electrode and

the titanium sheath with soap water after measurement, the titanium blade can be screwed off and

cleaned separartely if necessary.

5. The connector of the electrode should be kept clean and dry. If contaminated, please clean it with

medical cotton and absolute alcohol and blow dry to prevent the short circuit of the electrode and

slow reaction of electrode.

6. For tough contaminants, soak the electrode in Apera cleaning solution (AI1166) for 30 minutes. Then

use a soft brush to remove the contaminants. Afterwards, soak the electrode in 3M KCL soaking

solution for at least 1 hour. Rinse it off, then re-calibrate it before using again.

7. The connector of the electrode should be kept clean and dry. If contaminated, please clean it with

medical cotton and isopropyl alcohol and blow-dry it to prevent short circuit of the electrode or slow

response of the electrode.

8. The electrode should avoid testing strong acid and strong alkali solutions, as well as dehydrating

media such as absolute ethanol and concentrated sulfuric acid. If testing such solutions, the

immersion time should be minimized and the electrode should be carefully cleaned after use.

9. Every pH electrode will eventually age and fail. The typical service life of Apera pH electrodes is 12-

24 months depending on the frequency of usage and how well you keep it clean and properly stored.

We recommend replacing your electrode every 12-18 months to ensure the best accuracy.

Warranty(

We warrant this electrode to be free from defects in material and workmanship and agree to repair or

replace free of charge, at option of APERA INSTRUMENTS, LLC, any malfunctioned or damaged product

attributable to responsibility of APERA INSTRUMENTS, LLC for a period of SIX MONTHS from the

delivery.

This limited warranty does NOT cover any damages due to:

Accidental damage, transportation, storage, improper use, failure to follow the product instructions or to

perform any preventive maintenance, unauthorized repair or modifications, normal wear and tear, or other

external causes or actions beyond our reasonable control.

To get the fastest warranty fulfillment, go to support.aperainst.com and click “New Support Ticket” on

the upper right corner. Type your email in the requester field, “Warranty” in the Subject field, and then

input the following information in the description field:

• Your full name

• Product model that needs warranty fulfillment

• Serial number of the product (can be found on the back sticker of the tester body)

• What problem or issue you had experienced with the product

• Attach a photo of your proof of purchase

• Attach a photo of the problematic product

Then click Submit. One of our customer care specialists will help you fulfill the warranty within one

business day.

APERA INSTRUMENTS, LLC

Address: 6656 Busch Blvd, Columbus, OH 43229 Phone: 1-614-285-3080

Website: aperainst.com Email: [email protected]

Tabla de contenidos

Otros manuales de Instrumento de medición de Apera Instruments

Apera Instruments

Apera Instruments 2401T-F Manual de usuario

Apera Instruments

Apera Instruments PH60Z-MS Manual de usuario

Apera Instruments

Apera Instruments LabSen 803 Manual de usuario

Apera Instruments

Apera Instruments Gro Star AI104G Manual de usuario

Apera Instruments

Apera Instruments DO8500 Manual de usuario

Apera Instruments

Apera Instruments LabSen 821 Manual de usuario

Apera Instruments

Apera Instruments SX823-B Manual de usuario

Apera Instruments

Apera Instruments LabSen 753 Manual de usuario

Apera Instruments

Apera Instruments MP511 Manual de usuario

Apera Instruments

Apera Instruments PH60Z-PW Manual de usuario

Apera Instruments

Apera Instruments LabSen 851-1 Manual de usuario

Apera Instruments

Apera Instruments EC700 Manual de usuario

Apera Instruments

Apera Instruments LabSen 851-H Manual de usuario

Apera Instruments

Apera Instruments Premium Series Manual de usuario

Apera Instruments

Apera Instruments SX736 Manual de usuario

Apera Instruments

Apera Instruments EC950 Manual de usuario

Apera Instruments

Apera Instruments PC60 Manual de usuario

Apera Instruments

Apera Instruments LabSen 853-H Manual de usuario

Apera Instruments

Apera Instruments EC400 Manual de usuario

Apera Instruments

Apera Instruments SX823-B Manual de usuario

Apera Instruments

Apera Instruments SX716 Manual de usuario

Apera Instruments

Apera Instruments GroStar AI101G Manual de usuario

Apera Instruments

Apera Instruments WS200 Manual de usuario

Apera Instruments

Apera Instruments TN400 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario