APEC CCTV ADR-5008 Manual de usuario
Preface
Notice
The information in this manual was current when published. The manufacturer
reserves the right to revise and improve its products.
All specifications are therefore subject to change without notice.
Trademarks
ADR5008 ® is a registered trademark of APEC CCTV Inc.
Microsoft, Windows, Internet Explorer ® are registered trademarks of Microsoft
Corporation. Netscape, Navigator, Communicator ® are registered trademarks of
Netscape Corporation. Other brand and product names referred to in this manual
are trademarks or registered trademarks of their respective holders.
Trademarked names are used throughout this manual. Rather than place a symbol at
each occurrence, trademarked names are designated with initial capitalization.
Inclusion or exclusion is not a judgment on the validity or legal status of the term.
Warning
To reduce risk of electric shock, do not remove cover. No user service-able parts
inside. Refer servicing to qualified service personnel.
Do not expose this appliance to rain or moisture.
Do not install this product in hazardous areas where highly combustible or
explosive products are stored or used.
Severe impact or vibration may cause malfunction.
Do not move this product when ADR5008 is working.
Position it in an open space with flat surface, and also maintain at least 15 cm
between the left and right sides of the body and the wall.
The lightning flash/arrowhead symbol, within and equilateral triangle, alerts the
user to the presence of a shock hazard within the product’s enclosure.
CE Warning
This is a Class A product, in a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
FCC Warning
GUARANTEE
ʳ
Every care has been taken in the preparation of this manual; if you detect any
inaccuracies or omissions, please inform APEC CCTV, INC. in Walnut, CA or
your local distributor. APEC CCTV cannot held responsible for any technical
or typographical errors and reserves the right to make changes to the products
and manuals without your prior notice. APEC CCTV makes no warranty of any
kind with regard to the material contained within this document, including,
but not limited, the implied warranties of merchantability and fitness for a
particular purpose. APEC CCTV shall not be liable nor responsible for
incidental or consequential damages in connection with the furnishing,
performance or use of this material.
Important information
Before proceeding, please read and observe all instructions and warnings contained
in this manual. Retain this manual with the original bill of sale for future reference
and, if necessary, warranty service.
When unpacking your ADR5008 unit, check for missing or damaged items. If any item
is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS
PRODUCT. Contact your dealer or us for assistance.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Table of Contents
Overview ....................................................................................................1
Introduction ....................................................................................................................... 1
Features ............................................................................................................................. 2
System req uirements ......................................................................................................... 2
The Local GUI............................................................................................4
Introduction.........................................................................................................................4
Surveillance screen panel....................................................................................................4
PLAY button.......................................................................................................................4
LIVE button........................................................................................................................5
I/O button............................................................................................................................5
GO TO button.....................................................................................................................6
STATUS button..................................................................................................................6
VIDEO................................................................................................................................7
PTZ panel............................................................................................................................8
Play panel............................................................................................................................8
Setup..................................................................................................................................10
System setup......................................................................................................................10
Record Setup.....................................................................................................................22
Alarm.................................................................................................................................24
Motion detection...............................................................................................................30
ADR5008 network operation............................................................................................32
Introduction.......................................................................................................................32
Connecting........................................................................................................................32
Surveillance screen panel.................................................................................................34
Play button........................................................................................................................35
PTZ panel.........................................................................................................................36
System Setup....................................................................................................................36
System information..........................................................................................................37
Camera setting..................................................................................................................37
Set time and date..............................................................................................................38
Set NTP server.................................................................................................................38
System configuration........................................................................................................39
Set names and on-screen display......................................................................................40
Set user’s authority...........................................................................................................40
Record schedule..................................................................................................................41
Motion detection.................................................................................................................42
Playback..............................................................................................................................43
Back to home page..............................................................................................................44
View video without plug-ins...............................................................................................45
Advance Network .....................................................................................46
Connecting to the network.......................................................................................................47
Configuring the ADR5008......................................................................................................... 48
Using xDSL or cable Internet.....................................................................................................49
Using dial-up Internet................................................................................................................50
Remote access using dial-up....................................................................................................51
1. Introduction
The ADR-5008 package includes a system which supports up to 8cameras.
The DVR System is a high performance digital video recorder with built-in mini
web server and real-time video capturing capability. The video is grabbed and
compressed for faster transmission to your PC through 10/100Mbps Ethernet. The
video also can display through local VGA output . Besides, ADR-5008 supports digital
recording function. It can record / playback / browse video simultaneously and save
video data by cyclic recording to PC hard disk.
ADR-5008 supports full motion live video and audio through Internet, Intranet
connection.
When power up, the ADR5008 starts local DVR functions such as monitoring through
VGA output and recording to hard disk if it is configured to do that. For remote
monitoring or access to historical data, you will have to set up the LAN or Internet
environments and configure ADR-5008 IP information. When all these installation
are done successfully, ADR-5008 delivers real-time full-motion audio/video
transmission to anywhere anytime. A PC with Internet browser and our proprietary plug-ins
software can do that. The camera can be remotely controlled to zoom in and out (with a
PTZ camera), and the unit can be triggered to initiate certain events. Configuration of
ADR-5008 can be done by an IR remote control unit (default) or a mouse . A sample
configuration is shown as below.
1
Figure1.1.1 ADR5008 Network Configuration
1.1 Main Features for ADR-5008
9Video & audio recording
Up to 8 camera inputs (color or B/W)
Up to 30 fps on each camera for local monitoring
Record / display / playback simultaneously
Built-in QUAD / Multiplexes functions for local monitoring
Local playback of recorded video on VGA or TV monitor
Remote playback from PC browser
Query recorded data by date, time & events
Control well-known brand PTZ Cameras
9High video quality and low data rate
Up to 200:1 video compression
Multiple video compression engines: H.263, JPEG, M-JPEG, MPEG4
9Network
Dynamic IP support for Internet access
Direct Dial-up available
9Backup
Removable Hard Drives
2
Optional CD Writer
9Easy to use
Plug and play, non-Windows embedded real-time OS
Easy configuration via keyboard, Home Page or RS-232
port
Standard web browser as the client application
9Alarm function
Motion detection / Event trigger / Schedule / Pre-alarm recording
E-Mail & FTP alarm notification
Optional GPI/O for alarm control
9Customization
Supports HTML file upload for home page customization
Supports FTP Server upload for customization
3
4. The Local GUI
4.1 Introduction
The ADR5008 can be used and configured using either the optional remote
control unit or with the standard keyboard and mouse. This chapter covers mouse
operation. The ADR5008 must be in Mouse running mode for the mouse to
function. See Running modes to learn how to switch to Mouse control and
I/R Remote contrtoller.
4.2 Surveillance screen panel
The Surveillance Screen Panel enables you to define which live images are
displayed on screen.
Figure 4.2 Surveillance Panel, Viewing live images on the ADR5008.
4.3 PLAY button
Click the PLAY button to display a list of all the recordings stored on the
ADR5008
The alarm condition which caused the file to be recorded is indicated in the
list. For instance, in the screen shot shown here, the letter Mnext to a file
indicates that the file was recorded after motion was detected by the camera.
Pick a recording from the displayed list and click OK to play. The recording
will play on screen. Click the LIVE button to return to live images from the
connected cameras.
PLAY button
Lock file
backup icon
5
4.4 LIVE button
Click the LIVE button to display live images on screen from the cam-
eras connected to the ADR5008.
Click the left mouse button twice to switch to full screen display.
4.5 I/O button
Click the I/O button to display the I/O panel.
When an alarm has been triggered, the GPI and GPO that are con-
nected will show the status of the input or output device. GPI devices
will show NC (normally closed) or NO (normally open) as the status
of the switch while GPO devices will show On or Off as their status.
I/O button
Current triggers
Previous triggers
LIVE button
Tabla de contenidos
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario