AOpen AX5TC Manual de usuario
AX5TC
User's Guide
Printed in Taiwan
PART NO.:49.87801.211
DOC. NO.:AX5TC-1-E9801A
AX5TC
Mainboard
User's Guide
Document Number : AX5TC-1-E9801A
Model and Revision : For AX5TC revision 1.xx
Manual Revision : English, revision A
Release Date : Jan 13, 1998
More help for latest information:
Taiwan http://www.aopen.com.tw
USA http://www.aopen-usa.com
http://www.aopenamerica.com
Europe http://www.aopen.nl
ii
Copyright
Copyright 1998 by this company. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, manual or otherwise,
without the prior written permission of this company.
iii
Disclaimer
This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs
prove defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.
Intel and Pentium are registered trademarks of Intel Corporation.
XT/AT is a registered trademark of International Business Machines Corporation.
AMI is a registered trademark of American Megatrends Inc.
AWARD is a registered trademark of Award Software Inc.
Other brand and product names are trademarks and/or registered trademarks of their
respective holders.
iv
Organization
Chapter 1, Overview, covers the introduction and specifications of the system
board and special features.
Chapter 2, Hardware Installation, describes hardware jumpers, connectors and
memory configuration. There are user friendly drawings to locate jumper and
connector.
Chapter 3, AWARD BIOS, explains the system BIOS and tells how to configure
the system by setting the BIOS parameters.
Appendix A, Frequently Asked Question, collects most frequently asked
question of this product.
Appendix B, Troubleshooting Guide, includes first aid information you need if
you meet trouble, the WWW address and worldwide service telephone/fax are
also included.
Appendix C, Jumper Table Summary, gives you a tabular summary of the
jumper settings discussed in Chapter 2.
v
Conventions
The following conventions are used in this manual:
Text entered by user,
default settings,
recommended selections
Represent text input by the user,
default settings and recommended
selections
<Enter>, <Tab>,<Ctl>, <Alt>,
<Ins>, <Del>, etc Represent the actual keys that you
have to press on the keyboard.
Note:
Gives bits and pieces of additional
information related to the current topic.
Warning:
Alerts you to any damage that might
result from doing or not doing specific
actions.
Caution:
Suggests precautionary measures to
avoid potential hardware or software
problems.
Important:
Reminds you to take specific action
relevant to the accomplishment of the
procedure at hand.
Tip:
Tells how to accomplish a procedure
with minimum steps through little
shortcuts.
vi
Contents
Chapter 1 Overview
1.1 Specifications.................................................................. 4
1.2 Suspend to Hard Drive.................................................... 6
1.3 0V Modem Wake Up........................................................ 9
1.4 System Voltage Monitoring.......................................... 11
1.5 Fan Monitoring............................................................... 11
1.6 CPU Thermal Protection............................................... 12
1.7 Multi-language BIOS..................................................... 13
1.8 PCI Sound Card connector........................................... 13
Chapter 2 Hardware Installation
2.1 Jumper and Connector Locations................................. 2
2.2 Jumpers............................................................................ 4
2.2.1 Setting the CPU Voltage............................................ 5
2.2.2 Selecting the CPU Frequency ................................... 8
2.2.3 Clearing the CMOS.................................................. 12
2.3 Connectors..................................................................... 13
2.3.1 Power Cable............................................................ 13
2.3.2 ATX Soft-Power Switch Connector.......................... 13
2.3.3 Fan............................................................................14
2.3.4 PS/2 Mouse............................................................. 14
2.3.5 Keyboard ................................................................. 15
2.3.6 Serial Devices (COM1/COM2) ................................ 15
2.3.7 Printer...................................................................... 16
2.3.8 USB Device ............................................................. 16
2.3.9 Floppy Drive............................................................. 16
2.3.10 IDE Hard Disk and CD ROM................................. 17
2.3.11 Hard Disk LED....................................................... 18
2.3.12 Panel Connector.................................................... 19
vii
2.3.13 IrDA Connector...................................................... 20
2.3.14 SB-LINK................................................................. 21
2.3.15 Wake-up Connector .............................................. 22
2.4 Configuring the System Memory................................. 23
Chapter 3 Award BIOS
3.1 Entering the Award BIOS Setup Menu.......................... 2
3.2 Standard CMOS Setup.................................................... 3
3.3 BIOS Features Setup....................................................... 6
3.4 Chipset Features Setup................................................ 11
3.5 Power Management Setup............................................ 17
3.6 PNP/PCI Configuration Setup....................................... 24
3.7 Load Setup Defaults...................................................... 28
3.8 Load TurboDefaults...................................................... 28
3.9 Integrated Peripherals................................................... 29
3.10 Password Setting........................................................ 34
3.11 IDE HDD Auto Detection............................................. 34
3.12 Save & Exit Setup........................................................ 34
3.13 Exit without Saving..................................................... 35
3.14 NCR SCSI BIOS and Drivers....................................... 35
3.15 BIOS Flash Utility......................................................... 35
Appendix A Frequently Asked Question
Appendix B Troubleshooting
Appendix C Jumper Table Summary
1-1
Chapter 1
Overview
The AX5TC is a high-performance Pentium¿ø»~! '|¥…'w‚q ¯¡C -based
system board that utilizes the PCI/ISA architecture and ATX form factor. It
integrates the Intel 82430TX PCIset, an Ultra I/O controller, and a PCI mode 4
enhanced IDE controller with bus master and Ultra DMA/33 to enhance system
performance. It has 512KB pipeline-burst second-level cache onboard and
support three Dual in-line memory modules (DIMM) that allow to mix EDO
and SDRAM memory and expansion up to a maximum of 256MB. AX5TC uses
2M bit Flash ROM BIOS to reserve for future new functions.
Not only above features, AX5TC implements most advanced technology such
as High-quality DIP switch, CMOS and RTC battery-less backup, Synchronous
switching regulator, CPU thermal protection, Fan monitoring, System voltage
monitoring, Modem Wake Up and Suspend to Hard Drive.
In addition, AX5TC also implements many special features as following.
Suspend To Hard Drive "Immediately" turns on system and goes back to the
original screen before power down. You can resume your original work directly
from hard disk without go through the Win95 booting process and run your
application again. Suspend to Hard Drive saves your current work (system
status, memory image) into hard disk. Note that you have to use VESA
compatible PCI VGA, Sound Blaster compatible sound card with APM driver,
for Suspend to Hard Drive to work properly.
0V Modem Card Wake-up In conjunction with ATX soft power On/Off, it is
possible to have system totally power off and wakeup to automatically answer a
phone call such as answering machine or to send/receive fax. The most
important break through is not only external box modem but also internal
modem card can be used to support Modem Wake Up. The AX5TC and MP56
internal modem card implement special circuit (patent applied) to make sure
the modem card work properly without any power.
Tabla de contenidos
Otros manuales de Placa madre de AOpen
AOpen
AOpen DX34R-U Hoja de datos
AOpen
AOpen AX4GE Tube-G Manual de usuario
AOpen
AOpen AX4GER Guía de configuración
AOpen
AOpen MX4GE Guía de configuración
AOpen
AOpen AK77-400N Guía de configuración
AOpen
AOpen AX45-8X Max Hoja de datos
AOpen
AOpen AK77-8X Guía de configuración
AOpen
AOpen Fortress 7000 Manual de usuario
AOpen
AOpen MX4L Guía de configuración
AOpen
AOpen AK77-8X Hoja de datos
AOpen
AOpen i945GTm-VHL Manual de usuario
AOpen
AOpen AP5VM Manual de usuario
AOpen
AOpen MX46U2-GN Guía de configuración
AOpen
AOpen MX4GR Guía de configuración
AOpen
AOpen AX4T 2-533 Hoja de datos
AOpen
AOpen MX4B-533 Manual de usuario
AOpen
AOpen AX45 PRO-533 Guía de configuración
AOpen
AOpen AK86-L Guía de configuración
AOpen
AOpen AX4B-533 Plus Hoja de datos
AOpen
AOpen AX6B Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
