AOpen AX59PRO Manual de usuario
AX59PRO
User's Guide
Printed in Taiwan
PART NO.:49.87801.311
DOC. NO.:AX59P-1-E9903G
AX59PRO
Mainboard
User's Guide
Document Number : AX59P-1-E9809F
Model and Revision : For AX59PRO revision 1.xx
Manual Revision : English, revision F
Release Date : Sep 21, 1998
More help for latest information:
Taiwan http://www.aopen.com.tw
USA http://www.aopen-usa.com
http://www.aopenusa.com
http://www.aopenamerica.com
Europe http://www.aopen.nl
ii
Copyright
Copyright ©1998 by this company. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, manual or otherwise,
without the prior written permission of this company.
iii
Disclaimer
This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.
Intel and Pentium are registered trademarks of Intel Corporation.
XT/AT is a registered trademark of International Business Machines Corporation.
AMI is a registered trademark of American Megatrends Inc.
AWARD is a registered trademark of Award Software Inc.
Other brand and product names are trademarks and/or registered trademarks of their
respective holders.
iv
FCC Class B Radio Frequency
Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class
B Subassembly -CPU Board device, pursuant to Part 15 of FCC Rules.
Operation is subject to the following two conditions: 1. This device may not
cause harmful interference, and 2. This device must accept any interference
received, including interference that may cause undesired operation.
Equipment Classification : FCC Class B Subassembly - CPU Board
Type of Product : Intel Pentium PCI/ISA/AGP ATX Motherboard
Chipset(s) : VIA MVP3
AX59PRO
Test To Comply
With FCC Standards
FOR HOME OR OFFICE USE
The limits of FCC Part 15 Class B are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/television technician for help.
v
Notice 1:
The changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Notice 2:
Shielded interface cables, if any, must be used in order to comply with emission
limits.
vi
Organization
Chapter 1, Overview, covers the introduction and specifications of the system
board and special features.
Chapter 2, Hardware Installation, describes hardware jumpers, connectors and
memory configuration. There are user friendly drawings to locate jumper and
connector.
Chapter 3, AWARD BIOS, explains the system BIOS and tells how to configure
the system by setting the BIOS parameters.
Appendix A, Frequently Asked Question, collects most frequently asked
question of this product.
Appendix B, Troubleshooting Guide, includes first aid information you need if
you meet trouble, the WWW address and worldwide service telephone/fax are
also included.
Appendix C, Jumper Table Summary, gives you a tabular summary of the
jumper settings discussed in Chapter 2.
vii
Conventions
The following conventions are used in this manual:
Text entered by user,
default settings,
recommended selections
Represent text input by the user, default
settings and recommended selections
<Enter>, <Tab>,<Ctl>, <Alt>,
<Ins>, <Del>, etc
Represent the actual keys that you
have to press on the keyboard.
Note:
Gives bits and pieces of additional
information related to the current topic.
Warning:
Alerts you to any damage that might
result from doing or not doing specific
actions.
Caution:
Suggests precautionary measures to
avoid potential hardware or software
problems.
Important:
Reminds you to take specific action
relevant to the accomplishment of the
procedure at hand.
Tip:
Tells how to accomplish a procedure
with minimum steps through little
shortcuts.
viii
Contents
Chapter 1 Overview
1.1 Specifications..................................................................3
1.2 Overclocking ...................................................................5
1.3 Zero Voltage Modem Wake Up ......................................8
1.4 System Voltage Monitoring..........................................10
1.5 Fan Monitoring ..............................................................10
1.6 CPU Thermal Protection ..............................................11
chapter 2 Hardware Installation
2.1 Jumper and Connector Locations ................................2
2.2 Jumpers ...........................................................................4
2.2.1 Setting the CPU Voltage...........................................5
2.2.2 Selecting the CPU Frequency ..................................8
2.2.3 DRAM Clock ...........................................................12
2.2.4 Clearing the CMOS.................................................13
2.3 Connectors ....................................................................14
2.3.1 Power Cable ...........................................................14
2.3.2 ATX Soft-Power Switch Connector.........................14
2.3.3 Fan………………………………………………………15
2.3.4 PS/2 Mouse ............................................................15
2.3.5 Keyboard.................................................................16
2.3.6 Serial Devices (COM1/COM2)................................16
2.3.7 Printer .....................................................................17
2.3.8 USB Device.............................................................17
2.3.9 Floppy Drive............................................................17
2.3.10 IDE Hard Disk and CD ROM ................................18
2.3.11 Hard Disk LED ......................................................19
2.3.12 Panel Connector ...................................................20
2.3.13 IrDA Connector .....................................................21
2.3.14 Wake-up Connector..............................................22
ix
2.3.15 LAN Wake-up Connector......................................22
2.4 Configuring the System Memory.................................23
2.5 Windows 98 Installation ...............................................29
chapter 3 Award BIOS
3.1 Entering the Award BIOS Setup Menu .........................2
3.2 Standard CMOS Setup....................................................3
3.3 BIOS Features Setup ......................................................6
3.4 Chipset Features Setup................................................11
3.5 Power Management Setup ...........................................15
3.6 PNP/PCI Configuration Setup......................................20
3.7 Load Setup Defaults .....................................................23
3.8 Load Turbo Defaults .....................................................23
3.9 Integrated Peripherals ..................................................24
3.10 Password Setting........................................................29
3.11 IDE HDD Auto Detection ............................................29
3.12 Save & Exit Setup .......................................................29
3.13 Exit without Saving.....................................................30
3.14 NCR SCSI BIOS and Drivers ......................................30
3.15 BIOS Flash Utility........................................................30
Appendix A Frequently Asked Question
Appendix B Troubleshooting
Appendix C Jumper Table Summary
Tabla de contenidos
Otros manuales de Placa madre de AOpen
AOpen
AOpen AX4PER-G Hoja de datos
AOpen
AOpen AX3S Max Manual de usuario
AOpen
AOpen AK76F-400N Guía de configuración
AOpen
AOpen AX4SPE Max II Guía de configuración
AOpen
AOpen MX4LS Manual de usuario
AOpen
AOpen MX4GE Hoja de datos
AOpen
AOpen AX64 PRO Guía de configuración
AOpen
AOpen ATA Manual de usuario
AOpen
AOpen MX3S-T Guía de configuración
AOpen
AOpen AX6B Plus Manual de usuario
AOpen
AOpen AX4B-533 Tube Hoja de datos
AOpen
AOpen AX45-533 PLUS Guía de configuración
AOpen
AOpen AK76D Hoja de datos
AOpen
AOpen AX4B-G2 Manual de usuario
AOpen
AOpen AX4T II-533 Guía de configuración
AOpen
AOpen AX5T Manual de usuario
AOpen
AOpen MX46LS-V Guía de configuración
AOpen
AOpen AK72 Guía de configuración
AOpen
AOpen MK73LE Guía de configuración
AOpen
AOpen AX6BC EZ Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
