AOpen H800 Manual de usuario
Introduction
1
Copyright
Copyright © 2000 by AOpen Inc. All rights reserved.
No part of this document may be copied or reproduced in any form or by any means without
the prior written consent of AOpen Inc.
AOpen makes no warranties with respect to this documentation and disclaims any implied
warranties of merchantability, quality, or fitness for any particular purpose. The information
in this document is subject to change without notice. AOpen reserves the right to make
revisions to this publication without obligation to notify any person or entity of any such
changes.
AOpen®is a registered trademark of AOpen Inc. Other trademarks or brand names mentioned herein
are trademarks or registered trademarks of their respective owners.
Table of Contents
1. Introduction........................................................................... 1-1
1.1. Configuration.....................................................................................1-2
1.2. Features ............................................................................................1-3
2. Parts Description..................................................................2-1
2.1. Front Cover and Front Panel.............................................................2-2
2.1.1. Front Cover............................................................................2-2
2.1.2. Front panel.............................................................................2-3
2.2. Back Panel ........................................................................................2-4
2.2.1. Power Supply.........................................................................2-4
2.2.2. I/O Ports.................................................................................2-5
2.2.3. Expansion Slots......................................................................2-5
2.2.4. Housing Fans.........................................................................2-5
2.3. Main Body .........................................................................................2-6
2.4. Cooling System .................................................................................2-7
2.5. Security Device..................................................................................2-8
2.6. Power Supplies..................................................................................2-9
2.6.1. Standard ATX 12V power supply ...........................................2-9
2.6.2. Redundant 337W Power Supply.........................................2-13
2.7. Drive Bays.......................................................................................2-18
3. Installation............................................................................. 3-1
3.1. Opening Chassis...............................................................................3-1
3.2. Installing Motherboard into Chassis...................................................3-2
3.3. Fastening Slide Rails to FDD and 5.25” CD-ROM.............................3-3
3.4. Installing FDD and 5.25” CD-ROM into Chassis................................3-4
3.5. Installing HDD Cage into Chassis......................................................3-5
3.6. Final Assembly..................................................................................3-6
3.7. Rack Mount Placement .....................................................................3-7
3.8. Explosive View, parts and icon..........................................................3-8
3.8.1. Explosive view........................................................................3-8
3.8.2. parts......................................................................................3-8
3.8.3. accessory box.....................................................................3-10
3.8.4. icon .....................................................................................3-10
4. Optional Parts Lists.............................................................. 4-1
4.1. WH (wheels and Handle) kit (Optional) .............................................4-1
4.2. Rack Mount Assembly kit ..................................................................4-2
5. Technical Support ................................................................5-1
5.1. How to Get Technical Support...........................................................5-1
5.2. How to contact us..............................................................................5-1
Introduction
1-1
1. Introduction
The H800 is a user-friendly server chassis that has been tested and found to be complied
with the restrictions for a Class B device of the FCC Rules, CE, C tick and all EMC
requirements. Any accessing, upgrading and maintenance operation to the system can be
easily performed and done.
This server chassis supports the motherboard form factor of Baby AT, Full ATX & AT, and
SSI defined which can be integrated into a standalone or standard 19” rack mount, thus
greatly enlarge its working field.
This server chassis combines affordability, reliability, and expendability that totally meet
your professional needs. The 1.0mm heavy-duty zinc-plated steel is robust and can
effectively protect all components inside. The security system forbids all unauthorized
intrusions. One standard 8cm powerful cooling fan (expandable to two 8cm fans) provides
excellent ventilation to the chassis.
User’s Guide
Introduction
1-2
1.1. Configuration
Dimension:
(H x W x D) Front panel, foot stand excluded:
16.93 x 8.58 x 21.65 in. (430 x 218 x 550 mm),
Front panel, foot stand included:
17.72 x 8.58 x 23.43 in. (450 x 218 x 595 mm)
Motherboard
Size:
(W x L)
Support to 12 x 13 in. (305 x 330 mm)
Baby AT, Full ATX & AT, and SSI M.B.
Drive Bays: Nine external 5.25” drive, one FDD, one HDD cage.
(2*5.25” can support 3 HDD)
Expansion Slots: 7 slots
Power Supply: 350W/400W ATX12V power supply, or redundant 337W
(with or without 2nd power)
Security: Chassis intrusion alarm
Mechanical key lock on front panel (locking all
components with one key)
Thermal Solution: One built-in 8 cm fan on back panel (one optional 8cm fan
is available)
One optional 8 cm fan on front side (installed along with
HDD cage)
Rack Mounting: 5U Supporting
Air Filter Support one air filter on front panel
I/O port bracket Support one I/O port bracket for standard ATX M.B.
FDD Support 1 FDD with FDD cable
Long card Guide Support 2 sets of long card guide
Optional Hand set & Wheel
Rack mount accessory kit
BPL6: support 6 pcs Hot swap SCSI HDD
H800 Server Chassis
Introduction
1-3
1.2. Features
User’s Guide
Introduction
1-4
Redundant power supply: 337W (with or without 2nd power)
Standard ATX 12V power supply: 350 / 400W ATX power supply
Rack mount assembly kit (optional)
Support 5U rack mount accessories
Hot swap HDD cage (optional)
BPL6: Support 6pcs Hot swap SCSI HDD (4 x 5.25” changeable to 6 x
3.5” HDD)
Chassis key lock and Key set
Support key lock solution to provide security solution
Air filter
Supporting air filtering
HDD cage for three 3.5” HDD and one optional 8 cm fan
2 x 5.25” is spacious enough to support 3 x HDD and 1 optional 8cm fan
with slide rails solution
Disk drive bay installed by screw or slide guide
10pcs slide guides for the installation of 5.25” devices (including HDD
cage)
Optional wheel and hand set makes it incredibly mobile
One built-in 8 cm fan (one more optional 8cm fan available)
H800 Server Chassis
Parts Description
2-1
2. Parts Description
The H800 is designed to maximize the extension ability of the system for you to access,
upgrade, and maintain it.
The H800 is consist of:
Front Cover and Front Panel
Back Panel
Main Body
Cooling System
Security Device
Power Supplies
Drive Bays
User’s Guide
Parts Description
2-2
2.1. Front Cover and Front Panel
The H800 is designed with a key lock on the door to protect against inadvertent access to
the power button, reset button, and disk drives.
Behind the door are mountings for nine 5.25” and one 3.5” drive bays, one Power button,
one Reset button, one Intrusion Alarm Detector, and three LED indicators.
2.1.1. Front Cover
Key Lock:
Ke
y
This is a mechanical key lock,
which lock all components inside
the door. The H800 provides one
set key & key lock function for
system security to ensure the
safety of high-end system
components inside.
Key
Air Filter:
This air-filter screen is being attached to the inner
side of the front cover to avoid the short circuit of
system components caused by dusts.
Air filter
H800 Server Chassis
Parts Description
2-3
2.1.2 Front panel
Drive Bays:
Reset Knob
HDD LED
System Status LED
Power LED
Power Knob
3.5-inch Drive Bays
The H800 is designed with nine
5.25” drive bays and one 3.5”
drive bays. You can occupy the
space of two 5.25” drive bays
with one standard HDD cage;
and the space of HDD cage can
be occupied with three 3.5” IDE
HDD likewise. The Drive Bays
can be easily arranged based on
your needs to have the best
system performance.
5.25-inch
Drive Bays
HDD Cage
Power Knob:
Press the power knob to boot the system.
Reset Knob:
Press the Reset knob to reset the system.
LEDIndicators:
There are three LED on the lower right side of the front panel indicating the status of
(1) Power LED - green, (2) Hard Disk Drive - orange, and (3) System Status - yellow.
Intrusion Alarm Detector:
This micro switch is used to detect the opening of front cover and only works when
connected to motherboard. Please check you MB manual then install this connector into
MB.
P/N: 50.93301.001
Intrusion Alarm
User’s Guide
Parts Description
2-4
2.2. Back Panel
There are four components available to be installed on the back panel of H800: (1) Power
Supply, (2) I/O Ports, (3) Expansion Slots, and (4) Housing Fans.
2.2.1 Power Supply
The H800 provides 2 solutions:
1. Standard ATX 12V 350W/400W power supply : you have to assemble this standard ATX
12V power together with the power bracket before installed to chassis.
b
Power Bracket
Standard ATX 12V
350/400W
2. Redundant 337W power supply (with or without 2nd power)
337W Redundant
Power Cage
337W main power 2n
d
redundant 337W power
(optional)
H800 Server Chassis
Tabla de contenidos
