AnyTone BT01 Manual de usuario
A1.221121
www.anytone.net
BT01
User Guide
Bluetooth Microphone
Precautions
Please read the following regulations carefully before using this
product. The following regulations will help you understand and
fulfill your obligations in the warranty terms.
1. Without permission, please do not try to disassemble or modify
the BT01 Bluetooth Microphone. The handling of the Bluetooth
Microphone by non-professionals may cause damage.
2. Please don't put the Bluetooth Microphone in a dusty or damp
place.
3. Please abide by the walkie-talkie usage rate of 1 minute
for transmission and 4 minutes for reception. Long-term
transmission or continuous use in high-power mode will cause
the AT-D578UV mobile radio to heat up.
4. Please charge the BT01 Bluetooth Microphone before using it.
5. Do NOT insert a micro SD card into the SD-card slot. BT01
microphone doesn't support the SD card use.
Thank you for purchasing the Anytone BT01 Bluetooth Microphone
.
This product uses a dedicated master-slave Bluetooth module
to realize wireless talk and wireless operation settings for all
functions of the AT-D578UV DMR mobile radio. Combined with
the noise reduction function, it can effectively reduce background
noise and ambient noise to achieve high-definition intercom.
When you receive the BT01 microphone, please access the AT-
D578UV Menu-Setting-Device Info to check the version first,
make sure the radio is upgraded to the latest version to get the
BT-01 microphone working correctly. Reset must be done to the
radio after the firmware upgrade.
Latest firmware is available for download on https://www.anytone.
net/download page.
APPLICABLE MODELS
BT MODE CABLE MODE
AT-D578UV/
AT-D578UVIII
No GPS, No BT
AT-D578UV PRO/
AT-D578UVIII PRO
With GPS and BT
AT-D578UV PLUS/
AT-D578UVIII PLUS
With GPS and BT
Model
Name Firmware SCT3258 BT module
Software
APRS+BT
board
AT-D578UV/
AT-D578UVIII
No GPS, No BT
D578UV Ver1.17
or higher
V2.01.07BF
or higher N/A N/A
AT-D578UV PRO/
AT-D578UVIII PRO
With GPS and BT
D578UV Ver1.17
or higher
V2.01.07BF
or higher
ET12_AQQX_
V10043
or higher
N/A
AT-D578UV PLUS/
AT-D578UVIII PLUS
With GPS and BT
D578UVII Ver2.04
or higher
V2.01.07BF
or higher
ET12_AQQX_
V10043
or higher
V1.06
or higher
CONTENTS
1.Accessories ..................................................................... 1
1.1 Supplied Accessories ................................................................ 1
1.2 Optional Accessories ................................................................. 1
2.Charge The Battery ......................................................... 1
3. Getting Started................................................................ 2
Indicator Instructions ....................................................................... 2
4. Basic Operation.............................................................. 3
4.1 Power ON .................................................................................. 3
4.2 BT MODE connect to AT-D578UV ........................................... 3
4.3 CABLE MODE connect to AT-D578UV .................................... 4
4.4 Power Off ................................................................................... 4
4.5 Adjust The Volume .................................................................... 4
4.6 Set Up VFO Frequency ............................................................. 5
4.7 Select a Channel ....................................................................... 5
4.8 Select a Zone ............................................................................ 6
4.9 Make a Call ................................................................................ 6
4.10 Receive a Call ......................................................................... 6
4.11 Noise Reduction function ......................................................... 6
4.12 Menu Operation ....................................................................... 7
4.13 Programmed Key ..................................................................... 8
5.Technical Specications............................................... 12
EU DECLARATION OF CONFORMITY ............................ 13
1
1.Accessories
2.Charge The Battery
Charging Instructions
1. Insert the USB plug of the charging cable into the power
adapter.
2. Plug the power adapter into the AC power outlet.
3. Insert the other end of the charging cable into the charging/
upgrade interface of the radio.
4.
The red charging indicator of the BT01 Bluetooth Microphone is on.
5. When the red charging indicator of the BT01 Bluetooth
microphone goes out, the charging is completed.
Belt Clip
WWZZ-0005
4m Cable
SMX-0037
User's Manual
Adaptor 5V/1A
KGDY-0106
Cigarette lighter charger
(output 5V/1A, input 12V-48V)
CC-0026
USB-C charge cable
QT-0046
»USB Adaptor and Cigarette light charger must be 5V voltage
and ≥1A current output.
1.1-Standard Accessories
1.2-Optional Accessories
2
3.Getting Started
Indicator Instructions
Indicator Color Status
Left light red Transmit
Right light red Charge the battery
Right light green Receive
Right light red blinking Battery voltage is low
PTT
P2
P1
P3 MIC
Headset Jack
USB charge/
Firmware upgrade
Speaker
RJ45 connector
Indicator
UP POW DN
3
»In BT mode, DO NOT attach the 4meter cable to connect the
radio and BT01 microphone, it might cause strange behaviour.
4.Basic Operation
4.1-Power ON
Press the top [POW] button on microphone, the right green indicator
light on, later the screen displays "Select Port", press or to
choose the connect mode:
BT MODE: Connect the BT01 microphone to AT-D578UV mobile
radio through Bluetooth.
CABLE MODE: Connect the BT01 microphone to AT-D578UV
mobile radio through 4m cable.
Click on "confirm" to select the connect mode.
4.2-BT MODE connect to AT-D578UV
After select "BT MODE
"
on microphone, it will display BT NAME and
"NO DEVICE CONNECTED" when no radio is connected. In this
state, the BT pairing shall be done on AT-D578UV.
a.
Enter into AT-D578UV radio Menu Bluetooth BT On/Off, set
it ON.
b.Switch to AT-D578UV radio Menu Bluetooth BT Pairing,
select "Seek BT".
c.AT-D578UV radio displays "Seeking BT", it will take some time
to do the pairing.
d.AT-D578UV radio displays "ALL DATA CHECKING", the display
content of the AT-D578UV radio will be mapped to the Bluetooth
microphone.
e.AT-D578UV radio displays "EXTERNAL BT MODE" on the
screen, the pairing is done. BT icon is showed on the BT01
display to indicate it is at BT mode.
4
»Once the BT pairing is done, the BT microphone will
automatically connect to AT-D578UV radio after reboot.
»In BT mode, the cross band repeater function is not available,
as the audio path is occupied by the BT function.
»In CPS Optional Setting BT BT shutdown RF, if you
set this function ON. AT-D578UV radio will be powered off/on
automatically when BT microphone is off/on.
4.3-CABLE MODE connect to AT-D578UV
After select "CABLE MODE" on microphone, it will display "NO
DEVICE CONNECTED" when no radio is connected.
Use the 4m cable to connect the microphone to radio, AT-D578UV
displays "ALL DATA CHECKING", the display content of the AT-
D578UV radio will be mapped to the Bluetooth microphone.
AT-D578UV radio displays "EXTERNAL CABLE MODE" on the
screen, BT01 microphone is able to access the radio menu and do
communications now.
In Cable mode, the BT01 microphone is being charged when the
channel is free.
4.4-Power Off
Press and hold the top [POW] button on microphone to turn off the
microphone.
4.5-Adjust The Volume
In standby state, press the top [POW] button to switch the [CH-]/[CH+]
button for volume adjust use.
When screen shows "UpDn Key: Vol Set
"
, press [CH-] to reduce
the volume, press [CH+] to increase the volume.
The [VOL] or [CH] icon shows the current setting.
BT01 microphone is able to access the radio menu and do
communications now.
Otros manuales para BT01
1
Tabla de contenidos
Otros manuales de Micrófono de AnyTone
