Antenex Vu+ DUO 4K SE Guía de inicio rápido
English │Slovensky │Polski │Česky
English
HDD BRKT
What's included ?
Easy Setup Guide HDMI
Cable
Power
Cord
Power
Adapter
RCURCU Battery
HDD
Screw
11
Front Panel
Mini TV
Displays TV streaming, graphic logo of channels
and uploaded user`s favorite images on 3.5”LCD.
Door
open
USB Host
Connects to the USB memory stick
or external HDD.
Smartcard reader slot
One Smartcard slots are provided.
Touch Button
CI Module slot
Two CI module slots are provided.
Standby LED Indicator
Channel / v
Touch button for
navigating through
channel list.
Volume + / -
Touch button for adjusting the audio volume.
v
22
Rear Panel
RS232
2x USB 3.0
S/PDIF
Connects to a digital audio
system using S/PDIF cable.
HDMI In/Out
Connects to TV by HDMI Cable
for both audio and video signals, also for using
other devices connected to HDMI In port.
On/O Switch
Power Adaptor Input
Enables you to enjoy with variety channels up to 16 signals.
(Supports FBC DVB-S/S2X or FBC DVB-C/C V2 or Dual DVB-T2(MTSIF).)
FBC Pluggable Tuner Slots
Detachable 2.5”
HDD BRKT (15mm)
Gigabit Ethernet
Use CAT6 FTP(STP) Ethernet cable.
33
Remote Control
TV Power
Navigation Keys
Navigates up/down and left/right
on the menu options.
Up/down keys are used to call up
the channel list.
Teletext
Displays the teletext information of
the current channel if the channel
provides subtitles.
Subtitle
Displays the subtitle of
the current channel
if the channel provides subtitle.
AV
This button is used
when selecting video source of TV.
EPG
Displays the Electronic Program
Guide (EPG) information
if provided.
CHANNEL+/-
Color Keys
• Red – mainly used for REC,
Cancel, etc.
• Green – mainly used for OK
• Yellow
• Blue
Volume+/-
EXIT
Numeric Keys
STB Power
Mute
44
Precaution!!!
1. Connecting Power
• This product operates only in the range of AC100-240V and 50Hz/60Hz. Please check rst your power
supply to see if it ts this range.
• Please be noted that you need to disconnect from the mains before you start any maintenance or
installation procedures.
• Make sure that the power cord is placed in a position where it is easy to unplug it from the mains in an
emergency.
2. Overloading
• Do not overload a wall outlet, extension cord or adapter as this may cause electrical re or shock.
3. Liquid
• This product is not water-proof and should not be exposed to dripping, splashing, or any type of liquid.
• No objects lled with liquid such as base shall be placed on the product.
• Please do not clean the product with wet cloth, which may cause a short circuit.
• No wet objects should be placed near the product.
4. Ventilation
• Allow a sucient space between the product and other objects to make sure air ventilation of the product.
• Do not block the top or rear of the product with an object, which will close the ventilation holes and lead to
a high temperature of the system. This may cause a failure of the product.
• Do not stack other electronic devices on top of the product.
• Do not insert any kind of pointed objects like screw, gimlet, etc. into the ventilation holes of the product.
This will damage the product.
5. Connecting the Satellite Cable.
• Disconnect the power of the product before you connect the satellite cable to the product.
Otherwise, it may cause damage to the LNB.
6. Grounding
• The LNB must be earthed to the system earth for the satellite dish.
7. Location
• Place the product indoor.
• Do not expose the product to rain, sun or lightening.
• Do not place the product near any heat appliances as a radiator.
• Ensure that there is more than 10 cm distance from any electrical devices and wall.
8. Lightening, Storm or Not In Use.
• Unplug the product and disconnect the antenna cable during a thunderstorm or lightening, especially
when left unattended and unused for a long period of time. This will prevent possible damages from
power surges or lightening.
9. Replacement of Parts
• Unauthorized part replacements, especially by one who is not a qualied technician may result in
damage to the product.
• Ensure that when part replacements are necessary qualied technicians perform the task using the
components specied by the manufacturer.
10. Hard Disk Drive
• Do not move the product or turn the power o suddenly while the Hard Disk Drive (HDD) is still running.
This may result in damage to the HDD and thus the system.
• The company shall not be liable for any corruption of data on the HDD caused by careless use or misuse of users.
11. Battery
• There is danger of explosion if batteries are incorrectly replaced.
• Replace batteries only with the same or equivalent type.
This Product has been designed and manufactured in compliance with EU consumer safety requirements (CE).
Please read the following safety precautions carefully.
55
Connecting Cable
2. Connect DUO 4K SE to the TV
One HDMI cable is included in the accessory box. Connect one end of the cable to the HDMI
input of TV. Connect the other end to the HDMI output of DUO 4K SE.
1. Connect Satellite/Cable/Terrestrial Signal cable to DUO 4K SE
Vu+ DUO 4K SE has pluggable FBC tuner slot which you can choose FBC-S2X or
FBC-C/C V2 or Dual T2(MTSIF) tuner.
1) Combination FBC-S2X Tuner
2) Combination FBC-C/C V2 Tuner
3) Combination Dual T2(MTSIF) Tuner
66
Connecting Cable
DC input condition
• 12V 5A
NOTE
3. Power Up
A power cord and an adapter are provided in the accessory box.
Plug the round end of the adapter power cord into the power input of DUO 4K SE.
77
Run First Time Installation
Step 1. Video Input Selection
HDMI
Video input selection
Please press OK if you can see this page on your TV or
select a dierent input port.
The next input port will be automatically probed in 20 seconds.
Step 2. Video Mode Selection
720p
1080i
1080p
2160p
576p
480p
576i
Video mode selection
88
Tabla de contenidos
Idiomas:
