Antelope Zenstudio+ Manual de usuario

Portable Thunderbolt™/ USB Audio Interface

Owner’s Manual

Contents

1. Safety Notes 5

2. Introduction 6

3. Features 7

4. Quick Start 8

5. Installation Guide 9

6. Front, Rear and Side Panels Explained

6.1. Front Panel Explained 10

6.2. Rear Panel Explained 12

6.3. Side Panel Explained 13

7. Software Control Panel 14

8. Advanced User Tips 23

9. In the box 23

10.Troubleshooting 24

11. Technical Speciﬁcations 26

12. Antelope Audio Support Resources 27

1. Safety Notes

• To reduce the risk of electrical shocks, ﬁre, and related

hazards:

• Do not remove screws, cover, or cabinet. There are no user

serviceable parts inside. Refer servicing to qualiﬁed service

personnel.

• Do not expose this device to rain, moisture or spillover of liquid

of any kind.

• Should any form of liquid or a foreign object enter the device,

do not use it. Switch off the device and then unplug it from

the power source. Do not operate the device again until the

foreign object is removed or the liquid has completely dried

and its residues fully cleaned up. If in doubt, please consult

the manufacturer.

• Do not handle the power cables with wet hands!

• Make sure the device is switched off when plugging/

unplugging it to/from the power source.

• Avoid placing things on the cabinet or using the device in

a narrow and poorly ventilated place which could affect

its operation or the operation of other closely located

components.

• If anything goes wrong, turn off the device ﬁrst and then

unplug the power. Do not attempt to repair the device yourself:

consult authorized service personnel or your dealer.

• Do not install near any heat sources such as radiators, stoves,

or other apparatus (including ampliﬁers) that produce heat.

• Do not use harsh chemicals to clean your Unit. Clean only with

specialized cleaners for electronics equipment.

• Connect all your devices before powering your Unit.

• Your unit should always be un-racked when traveling or in a

ﬂight case.

2. Introduction

Thank you for purchasing the Zen Studio+

from Antelope Audio.

Zen Studio+ is the successor to Antelope’s

world-renowned professional portable

interface Zen Studio. Its extended analog

and digital connectivity, 12 world-class mic

pres and Antelope’s signature clocking are

now accompanied by an evolving library of

hardware-based vintage effects. With both

Thunderbolt™ and USB connectivity,

Zen Studio+ is a the ultimate and most

versatile mobile recording system.

Zen Studio+ comes with a growing arsenal

of vintage FPGA-based effects, among which

EQs, compressors, guitar amps and cabinets.

The key to the Zen Studio+ modeling power

is its custom FPGA chip. This proprietary

technology makes the interface times more

powerful than similar devices. You can not

only create and maintain multiple mixes, but

also reach the sound of legendary studios and

hardware classics while exclusively working

in-the-box.

The interface features an integrated

Talkback function, allowing easy and fast

communication between recordings artists,

the engineer and the producer. Zen Studio+

offers dedicated Reamp outs, making it a

preferred choice not only for mobile recordists

and traveling artists, but for pro guitarists as

well. This portable interface is also equipped

with a 10MHz Atomic Clock Input for the most

stable type of clocking – all in the name of

reaching the perfect sound.

Zen Studio+ is fully controllable via an

intuitive desktop application for PC and

Mac, offering ﬂexible signal routing and

customizable presets. Users can create up to

four independent, zero-latency mixes, which

are assignable to any output, including the

two independent headphone outputs and the

monitor outputs.

For further information visit:

www.antelopeaudio.com

Enjoy working with Zen Studio+!

All the best,

The Antelope Team

3. Features

• Hardware-based vintage effects: EQs, compressors, guitar amps & cabinets

• Proprietary FPGA with massive modeling capabilities

• Thunderbolt™

• Custom USB 2.0 Type-B Connector

• 12 Class A mic preamps, with individual phantom power

• 2 Reamp outputs

• 4 Hi-Z instrument inputs

• 8 Channels I/O on DB-25

• 2 Monitor channels on TRS

• 2 Individually assignable stereo headphone outputs

• 32 Channels at 192kHz I/O via Thunderbolt™

• 24 Channels at 192kHz I/O via proprietary USB

• 16 Channels I/O via ADAT

• 2 Channels I/O via S/PDIF

• Talkback microphone

• Flexible routing and multiple zero-latency mixing

• Antelope’s renowned 64-bit Acoustically Focused Clocking

• Oven Controlled Oscillator for supreme clocking stability

• Word Clock I/O for sync with other devices

• Five presets for fast and easy recall of setups

• User friendly Windows and OS X compatible desktop app

4. Quick Start

Connect the DC power source on the rear panel.

Windows

1. Connect the USB cable to the USB port on your computer.

2. Download the Zen Studio+ launcher from

http://en.antelopeaudio.com/products/zen-studio-plus/.

3. Start the application, the launcher will automatically download the Software Control Panel.

4. Open your Control Panel by double clicking and follow the device activation procedure.

5. Connect your inputs and outputs of choice to Zen Studio+.

6. Open your preferred DAW and ensure the device is selected as an input and output.

Note: Make sure your Zen Studio+ has the most recent ﬁrmware installed. Check this by selecting

the Info panel and clicking on the Firmware Update button.

Mac OS

1. Connect the Thunderbolt™ (TB) or the USB cable to the TB or USB port on your computer.

2. Download the Zen Studio+ launcher from

http://en.antelopeaudio.com/products/zen-studio-plus/.

3. Start the application, the launcher will automatically download the Software Control Panel.

4. Open your Control Panel by double clicking and follow the device activation procedure.

5. Connect your inputs and outputs of choice to Zen Studio+.

6. Open your preferred DAW and ensure the device is selected as an input and output.

Note: Make sure your Zen Studio+ has the most recent ﬁrmware installed. Check this by selecting

the Options panel and clicking on the Firmware Update button.

Zen Studio+ System Requirements

Computer: Thunderbolt™ equipped Mac or USB 2.0 equipped PC

Processor: Core 2 Duo minimum, Core i3/i5/i7/E5 recommended

Memory: 4 GB RAM minimum, 8 GB RAM recommended

OS X: 10.9.3 or greater

5. Activation Guide

It is essential to activate Zen Studio+ before using it. Once the DC power source is plugged and

the device is connected to your computer via USB or Thunderbolt™ follow the steps below:

1. Navigate to www.antelopeaudio.com/products/zen-tour/.

2. Download the Zen Studio+ Launcher.

3. Start the application (If you are on a PC install the launcher). The launcher will automatically

download the Software Control Panel.

4. You will be greeted by an Activation Screen. If you already have an Antelope Audio account

click on “Use existing Antelope ID”. Enter your information and click Continue.

If you don’t have an Antelope Audio account please enter a user ID, e-mail and password,

then click Done.

Check your email for the activation link mail and click on it. If the email does not appear in

your Inbox, please check your Spam folder.

5. Go back to the launcher and enter the required information. Click Done.

6. You’re good to go!

6. Front, Rear and Side Panels Explained

6.1. Front Panel Explained

1. 2 Reamp outs

These outputs are direct outputs that should be used with guitar ampliﬁers for reamping.

2. 4 Instrument/ Mic Preamp/ Line Inputs

4 Class A mic preamps, with phantom power over Combo input with switchable line/ Hi-Z input.

3.Talkback Button

Press the talkback button to activate the talkback microphone. This can be distributed to the

selected headphones and/or monitors using the software control panel or the touchscreen.

4. Power button

Toggles standby/operation state. Clicking and holding for two seconds allows you to enter sub-

menu of the device.

• Mic Gain Control (rotary controls adjusts Mic Gain Clock Source)

• Sample Rate

• Volume Knob Control (allows you to select between three different monitoring outputs)

• Screensaver Time (allows you to change the time at which the screensaver becomes active)

• Device Info

• Factory Reset

5. Rotary control

Large stepped attenuator for headphone volume and main out volume. Clicking-in the large

volume control allows you to scroll between three different monitoring options: rear monitor

output; headphone output 1 and headphone output 2.

123 4 5

10 9

6 7 8

Tabla de contenidos

Otros manuales de Equipo de grabación de Antelope

Antelope

Antelope Goliath HD Gen. 3 Manual de usuario

Antelope

Antelope Zen Tour Manual de usuario

Antelope

Antelope Isochrone Trinity Manual de usuario

Antelope

Antelope ORION 32+ GEN4 Manual de usuario

Antelope

Antelope Discrete 8 Manual de usuario

Antelope

Antelope Orion 32+ Manual de usuario

Antelope

Antelope ORION STUDIO Synergy Core Manual de usuario

Antelope

Antelope ORION STUDIO Synergy Core Manual de usuario

Antelope

Antelope Galaxy 64 Synergy Core Manual de usuario

Antelope

Antelope Isochrone Trinity Manual de usuario

Antelope

Antelope Galaxy 32 Synergy Core Manual de usuario

Antelope

Antelope Orion Studio HD Manual de usuario

Antelope

Antelope R4S Manual de usuario

Antelope

Antelope DISCRETE 8 PRO Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado

Antelope zenstudio+ Manual de usuario

Manuales populares de Equipo de grabación de otras marcas