Antec GX300 Manual de usuario

GX300

PPre0

User Manual

GX300 User Manual

Congratulations on your purchase of the Antec GX300!

Following GX300 is Antec new military style chassis, in addition to continuation GX series of unique, wild,

uninhibited, robust style, GX300 exterior design is sturdy and as powerful and dominating as the tough

warrior. Front panel with plastic and 3D mesh design, tough lines with powerful mechanical sense.

GX300 equipped with one USB3.0, one USB2.0 and one fan with high/ low speed control interface, this

priceless product is unmatched by a similar specification of other enclosures. It comes with 1 x 120mm

fan, both for cooling and silent computing.

At Antec, we continually refine and improve our products to ensure the highest quality. As such, your

new chassis may differ slightly from the description in this manual due to improvements applied for the

optimal building experience. As of November 15, 2014, all features, descriptions, and illustrations in this

manual are correct.

Disclaimer

This manual is intended only as a guide for Antec’s computer

enclosures. For more comprehensive instructions on installing the

motherboard and peripherals, please refer to the manuals that

come with those components.

Table of Contents

Section 1: Introduction

1.1 Getting to Know Your Chassis.........................................................................5

1.2 Chassis Specifications.....................................................................................6

1.3 Toolkit ...........................................................................................................7

1.4 Before You Begin ...........................................................................................8

Section 2: Hardware Installation

2.1 Setting Up......................................................................................................10

2.2 Motherboard Installation...............................................................................10

2.3 Power Supply Installation...............................................................................12

2.4 Internal 3.5” / 2.5” Device Installation ...........................................................13

2.5 Cable Management........................................................................................15

Section 3: Front I/O Ports

3.1 USB 2.0 ..........................................................................................................17

3.2 USB 3.0 ..........................................................................................................17

3.3 HD Audio Ports ..............................................................................................18

3.4 Power Switch / Reset Switch / Hard Disk Drive LED Connectors......................18

3.5 Rewiring Motherboard Header Connections ..................................................19

Section 4: Cooling System

4.1 Included Fans.................................................................................................21

4.2 Optional Fans.................................................................................................21

4.3 Fan Switch Controller ....................................................................................23

4.4 Air Filters .......................................................................................................23

Section 1

Introduction

GX300 User Manual

1.1 Getting to Know Your Chassis

1. 6 x 3.5” / 2.5” drive trays

2. 2 x 120 mm top exhaust fan

3. 1 x 120 mm rear exhaust fan (pre-installed)

4. 2 x 120 mm front intake fan

5. 7 expansion slots

6. Motherboards: Standard ATX, Micro-ATX, Mini-ITX

7. Front ports: USB3.0, USB2.0, Audio I/O

8. CPU cutout

9. Cable routing holes

1.2 Chassis Specifications

Chassis Type

ATX-Tower

Chassis Color

Black

Dimensions

18.89” (H) x 8.26” (W) x 18.89” (D)

480 mm (H) x 210 mm (W) x 480 mm (D)

Weight

11.9 lbs / 5.4 kg

Cooling

Fan mounts:

- 2 x 120 mm top exhaust fan mount

- 1 x 120 mm rear exhaust fan mount

- 2 x 120 mm front intake fan mount

Included Fan:

- 1 x 120 mm rear exhaust fan

Drive Bays

- 6 x 3.5” / 2.5” tool-less HDD bays

- 3 x 5.25”ODD bays

Expansion Slots

Motherboard Size

Standard ATX, Micro ATX, Mini-ITX

Front I/O Panel

- 1 x USB 3.0

- 1 x USB 2.0

- Audio In/Out

1.3 Toolkit

An inventory of all screws and intended usage and quantity is provided here:

A. Front fan screw (8) (6-32x27.5PM)

B. HDD screw (24) (6-32x17.5TM)

C. Motherboard screw (9) (6-32x6CM)

D. Motherboard standoff (1) (6-32x6.35)

E. Power supply screw + VGA (5) (Power +VGA 6-32x6HWM)

F. 2.5”/3.5”tray-mount screw (8) (ODD+SDD M3x5TM)

G. Foot(1)

H. Rubber audio closer(2)

I. Rubber USB port closer(2)

1.4 Before You Begin

In order to ensure that your building experience with the GX300 will be a positive one, please take note

of the following:

While working inside your GX300, keep your chassis on a flat, stable surface. Make sure your

build environment is clean, well-lit, and free of dust.

Antec chassis feature rounded edges that minimize the occurrence of hand injuries. Nonetheless,

exercise caution and control when handling chassis interiors. We strongly recommend taking the

appropriate time and care when working inside the chassis. Avoid hurried or careless motions.

Handle components and cards with care. Do not touch the unshielded components or contacts

on a card. Hold a card by its edges. Hold a component such as a processor by its edges, never by

its pins.

To avoid electrostatic discharge, ground yourself periodically by touching an unpainted metal

surface (such as a connector or screw on the back of this computer) or by using a wrist

grounding strap.

Before you connect a cable, ensure that both connectors are correctly aligned and oriented.

Bent pins can be difficult to fix and may require replacement of the entire connector.

This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult

your motherboard manual for specific mounting instructions and troubleshooting. Before

proceeding, check the manual for your CPU cooler to find out if there are steps you must take

before installing the motherboard.

Do not sit on your chassis. Although it is constructed of heavy-duty steel and internally

reinforced, it is not designed to support the weight of an adult, and may buckle.

Remember to use the right tools for each task. Do not use improvised screwdrivers like coins,

nails or knife blades as they may result in damage to screw threads or even injury. Do not use

your fingernails to separate edges or lift the sides of the chassis, as paint chipping or injury may

occur.

Section 2

Hardware Installation

GX300 User Manual

2.1 Setting Up

Put the case upright on a flat, stable surface so that the side panel

is facing you. To remove the left and right side panels, remove

these thumbscrews first.

Note: Place the panel thumbscrews aside carefully and remember

where they are.

Remove the panel by gripping the end of the panel

at the top & bottom and swinging the panel outward.

Do not pull the panel back toward the rear of the chassis.

CAUTION: Do not use your fingernails to pry or lift the panels. Damage to the panels or

injury to your fingernails may result.

2.2 Motherboard Installation

Before proceeding:

Check the manual for your CPU cooler to find out if there are steps you must do before installing the

motherboard.

Make sure you have the correct I/O panel for your motherboard. If the panel provided with the chassis

isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel.

Make sure you have the correct I/O panel.

Remove the panel by the end of the panel at the top & bottom and

swing the panel outward.

Otros manuales para GX300

Tabla de contenidos

Otros manuales de Recinto de Antec

Antec

Antec NSK 3300 Manual de usuario

Antec

Antec ISK 300-65 Manual de usuario

Antec

Antec Studio Series Take 3 3U Manual de usuario

Antec

Antec NINE HUNDRED TWO V3 User's Manual de usuario

Antec

Antec P160 Manual de usuario

Antec

Antec SX1240 Manual de usuario

Antec

Antec Veris Fusion Remote Max Manual de usuario

Antec

Antec Performance 1 Silent Manual de usuario

Antec

Antec VERIS MX-1 Manual de usuario

Antec

Antec P280 Manual de usuario

Antec

Antec SLK3800B Manual de usuario

Antec

Antec SOLO UCC 13# 0761345-08500-7 EU Manual de usuario

Antec

Antec NSK 6580 Manual de usuario

Antec

Antec Sonata Designer 500 Manual de usuario

Antec

Antec Mini P180 White Manual de usuario

Antec

Antec Veris Fusion Remote Black Guía de inicio rápido

Antec

Antec Veris Fusion Remote Max Guía de inicio rápido

Antec

Antec SLK1650-QE Manual de usuario

Antec

Antec P160 Manual de usuario

Antec

Antec PLUSView1000 AMG User’s Manual de usuario

Antec

Antec Veris Fusion 430 Guía del usuario

Antec

Antec Sonata II 500 Manual de usuario

Antec

Antec Solution SLK2650-BQE User’s Manual de usuario

Antec

Antec Minuet Manual de usuario

Manuales populares de Recinto de otras marcas

SilentiumPC

SilentiumPC Armis AR5 Manual

Pulsar

Pulsar 17/TRP80/DSPR Manual de usuario

Thermaltake

Thermaltake V150 TG Manual de usuario

MSI

MSI MPG SEKIRA 500X Manual de usuario

Nexans

Nexans WTC05 Manual de usuario

Peavey

Peavey DS 1502 Manual de usuario

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manual de usuario

Rosewill

Rosewill RX82-U(JBOD) Manual de usuario

QNAP

QNAP SAS JBOD CLI 1.0 Manual de usuario

GAMDIAS

GAMDIAS Talos P1 Manual de usuario

Auvs

Auvs KR615 Manual de usuario

Digitus

Digitus DA-71114 Manual de usuario

CommScope

CommScope FDH 3000 Manual de usuario

FS FHD-FWME4 Manual de usuario

JBL

JBL CS1215T Manual de usuario

Pulsar

Pulsar ARAD-S4 Manual de usuario

Pulsar

Pulsar AWO454 Manual de usuario

NewerTech

NewerTech Voyager S3 Manual de usuario