Antari Mobile MB-20 Manual de usuario

MB-20X MOBILE

FOG MACHINE

User Manual

- ENGLISH

- ENGLISH-

Safety Information

Please read the following safety information carefully before operating the

machine. This information includes important safeguards about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

․ Keep this device dry.

․ Always connect to a grounded circuit to avoid risk of electrocution.

․ Do not operate if power cord is damaged. If power cord is damaged, replace it

immediately with a new one of same power rating.

․ Remove the machine from battery or power adaptor before servicing and when not in

use.

․ This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

remove machine from battery or power adaptor and clean with a damp cloth. If fluid is

spilled onto electronic parts, immediately unplug the machine and contact your local

Antari dealer for advice.

․ No user serviceable and modifiable parts inside. Never try to repair this product, an

unauthorized technician may cause damage or malfunction to the machine.

․ For adult use only. Never leave the machine running unattended.

․ For persons with reduced physical, sensory or mental capabilities or lack of experience

and knowledge, supervision or instruction must be given concerning use of applicance

in a safe way and understand the hazards involved.

․ Install the machine in a well-ventilated area. Provide at least 50 cm space around the

machine.

․ Never add flammable liquid of any kind to the machine.

․ Make sure there are no flammable materials close to the machine while operating.

․ Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

․ If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for advise.

․ Before transporting the machine, make sure the fluid tank is completely drained.

․ Fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it securely.

In case of eye contact or if fluid is swallowed, immediately look for medical advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check the content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retain the

packing material for inspection.

What is included: 1 x MB-20X Fog Machine

1 x Battery base

1 x Battery charger

1 x FLM-05P water-based liquid

1 x User Manual

1 x Flightcase

Product Dimensions

Product Overview

293 mm

238 mm

108 mm

Main Power Switch

Lock lever

Charger Input

Output Level Adjustment Knob

Wireless Receiver Socket

Wire Remote Socket

XLR 3-Pin DMX Connector

ON / OFF Switch Control

Fog Output Nozzle

Dip Switch

MB-20S Power Base (Optional)

Setting Up

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm

of open space around the machine.

Step 2: Fill the fluid tank with Antari FLM-05P fluid.

Step 3: Charge the battery by plugging the charger adaptor into a grounded electrical

outlet. Yellow light on the adaptor indicates charging, when it turns green then the charge

complete. Please note the battery requires 3 hours charge time. A fully charged battery can

run the machine for roughly 12 minutes.

Plug in the charger

Red indicates charging

Green indicates charging

complete

Power Input

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Connect the battery base or power base to the machine. Turn on the machine to

start operation.

Pull to release locking lever

Align and insert head unit to base

Step 5: To start making fog, locate the rotary knob on the back for output level adjustment,

and press the button to start making fog, release to stop.

Step 6: To turn off the machine, disconnect the machine from the battery base or power

base.

Operation

Control Panel Operation

The machine can be operated with the On/Off button and output level control knob located

on the rear. When using On/Off Mode press and hold the button to make fog, release to

stop. In Continuous Mode, press button once to produce fog, press again to stop.

Dip Switch 12

Function

OFF

On/Off Mode

Continuous Mode

Rotary Knob

Function

SMOKE

Turn fog on/off, adjust output volume from 0~100%

DMX Connector Pin Assignment

The machine provides 3-pin XLR connectors for DMX connection. The diagram below

indicates pin assignment information.

Function

Ground

Data-

Data+

DMX Operation

Making the DMX Connection – Connect machine to a DMX controller or to one of the

machines in the DMX chain. The machine uses a 3-pin XLR connector for DMX connection,

the connector is located on the rear of the machine.

Address Setup – Use the DIP switch located on the rear of the machine to set the DMX

address. The machine occupies 1 control channels. The starting address is defined as the

first channel from which the machine will respond to the controller. Always double check to

make sure there are no overlapping channles in order to control the machine correctly.

DMX Channel Function

Channel 1

DMX Value Range

Function

Fog

0 – 4

5 – 255

Fog Off

Output 1-100%

Z-3 Remote Control Operation (Optional)

To operate the machine by remote control, connect the remote to the microphone jack

located on the rear of machine. Use the switch to turn fog on/off, and use the rotary knob to

adjust the output volume from 0~100%.

WTR-20 Wireless Operation (Optional)

Wireless remote control system WTR-20 consists of a transmitter equipped with four buttons to

activate, deactivate, increase and decrease fog output and an onboard receiver attached to the

rear panel of MB-20X fog machine.

W-2 Wireless Transmitter

Press [A] button to emit fog.

Press [B] button to stop.

Press [C] button to increase output volume.

Press [D] button to decrease output volume.

In a an unobstructed open space the effective distance is 50 meters, usage depending on

obstacle level has an effective distance is 10-25 meters.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Máquina de niebla de Antari

Antari

Antari M-9 RGBAW Manual de usuario

Antari

Antari X-510PRO Manual de usuario

Antari

Antari II Series Manual de usuario

Antari

Antari F-6 Manual de usuario

Antari

Antari HZ-500 Manual de usuario

Antari

Antari PM-1 Manual de usuario

Antari

Antari Z-1000X MK3 Manual de usuario

Antari

Antari MOBILE MB-1 Manual de usuario

Antari

Antari FT-200 Manual de usuario

Antari

Antari F-2 Fazer Manual de usuario

Antari

Antari FT-20 Manual de usuario

Antari

Antari X FAZER Manual de usuario

Antari

Antari M-1 Manual de usuario

Antari

Antari Z Series Manual de usuario

Antari

Antari MOBILE MB-55 Manual de usuario

Antari

Antari X-310PRO Manual de usuario

Antari

Antari F-80ZY Manual de usuario

Antari

Antari Z-1500II Manual de usuario

Antari

Antari SFX-1000 Manual de usuario

Antari

Antari M-11 Manual de usuario

Antari

Antari Z-Stream Manual de usuario

Antari

Antari Fazer X-310 PRO Manual de usuario

Antari

Antari S-500 Manual de usuario

Antari

Antari FT-200 Manual de usuario

Manuales populares de Máquina de niebla de otras marcas

Boost

Boost BOOST-FOG400LED-BK Manual de usuario

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manual de usuario

EuroLite

EuroLite ZEITGEIST FOG-1200 Manual de usuario

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manual de usuario

PROEL

PROEL DRAGO HEAVY PLFD150HY Manual de usuario

Sparklyn

Sparklyn Y846 Manual de usuario

Magicfx

Magicfx CO2 Gun Manual de usuario

Ibiza

Ibiza LSM500LAS Manual de usuario

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manual de usuario

High End

High End F-100 Manual de usuario

Chauvet

Chauvet ARENA 2100 FLEX Manual de usuario

Beamz

Beamz F1600 Manual de usuario

Sagitter

Sagitter SG ARS900C Manual de usuario

KISANKRAFT

KISANKRAFT KK-STF-480 Manual de usuario

Orion

Orion OT-U250PP Guía

Beamz

Beamz S2500 Manual de usuario

American DJ

American DJ Dyno-Fog II Manual de usuario

JB Systems

JB Systems FX 1700 Manual de usuario