Anran Wireless Security NVR Series Manual de usuario
Wireless Security NVR Kits
Quick Installation Guide
2pcs/4pcs/6pcs/8pcs
720P/960P/1080P Wireless Security NVR Kits
Content
1. Thanks--------------------------------------------------------------------------------------------------2
2. Safety tips----------------------------------------------------------------------------------------------2
3. What else do you need-----------------------------------------------------------------------------2
4. Know the hardware----------------------------------------------------------------------------------3
5. Things to check before installation--------------------------------------------------------------3
5.1 Package Includes--------------------------------------------------------------------------------3
5.2 A test run------------------------------------------------------------------------------------------3
6. Setup the System for Live View-------------------------------------------------------------------4
6.1 Preparation---------------------------------------------------------------------------------------4
6.2 Steps to setup the system---------------------------------------------------------------------4
7. Network setting -Get the system ONLINE------------------------------------------------------5
8. Viewing the Camera on Smart Phone-----------------------------------------------------------6
8.1 View on mobile APP----------------------------------------------------------------------------6
8.2 Playback on mobiles----------------------------------------------------------------------------8
9. Viewing Camera on Computer or Laptop by IE-----------------------------------------------8
10. Record Video---------------------------------------------------------------------------------------10
10.1 System with preinstalled hard drive-----------------------------------------------------10
10.2 System without preinstalled hard drive------------------------------------------------11
10.3 Record Modes--------------------------------------------------------------------------------11
11. Playback video-------------------------------------------------------------------------------------14
12. Backup videos to USB storage ----------------------------------------------------------------14
13. Device Manage------------------------------------------------------------------------------------15
13.1 Add camera 一Match code----------------------------------------------------------------15
13.2 Delete channel--------------------------------------------------------------------------------17
13.3 Name cameras -------------------------------------------------------------------------------18
13.4 Change camera sequence -----------------------------------------------------------------18
14. Email notification---------------------------------------------------------------------------------18
15. FAQs--------------------------------------------------------------------------------------------------21
1. Thanks
Thank you for purchasing Anran products!
This is a quick user’s guide explaining how to set the system up and get it running. If
you need customer support, please email us at support@anran-cctv.com. You can
expect a response within 24 hours
2. Safety Tips (Please Follow)
1. Do not put any item containing fluid on the product.
2. Use the product in ventilated area and avoid blocking the vents.
3. Use the included power supply with the product to prevent damage.
4. Use the product within its standard working temperature and humidity range.
5. Obey your local regulations and policies during installation.
3. What else do you need?
①The NVR(Network Video Recorder--the main box), you only need a display for it.
Tips: display could be a PC monitor or a TV, with either VGA or HDMI video input
port.
②Give it memory. Adding a SATA hard drive to the NVR will add memory to the
system so you can record, playback videos and copy the videos when needed. (If you
purchased the item with HDD preinstalled, the system will automatically record if
HDD was formatted.)
Tips: The SATA hard drive installation instruction please refer to FAQ#Q1.
③Internet connection. Like a PC, you can use it without Internet; but with an
Internet connection you can have the system's full capabilities. Hardwire the NVR via
a network cable to your router to get online.
4. Know the hardware (NVR)
①Wi-Fi Antennas: Wi-Fi connection with cameras.
②VGA Port: For viewing on VGA monitor
③HDMI Port: For viewing on HDTV
④WAN/ LAN Port: Connect your NVR to the Internet, or data transmission with
cameras.
⑤USB Ports: For mouse and data backup
⑥Power supply
5. Things to check before installation
①Package includes
After the item is received, please check all products and accessories according to
vendor's Package Includes description. If anything is missed or damaged, please
contact us.
②A test run
The cameras require mounting and power cabling in some situations. To save your
time and make sure all devices work well, we suggest a test run of all devices IN THE
SAME PLACE before installation. Follow the steps in section 6 to run the system. If
everything works well, you can then go ahead and mount cameras to where you
want. If there is any exception, please contact ANRAN support or your vendor.
6. Setup the System for Live View
①Preparation:
1. The ANRAN wireless camera system.
2. A monitor or a TV.
3. A VGA cable or an HDMI cable. (Many monitors/ TVs have them as standard
accessories)
4. A router for Internet connection.
②Steps to setup the system
Please connect the wireless camera system as pictured below.
1. Screw on antennas to cameras.
2. Connect the monitor/ TV to the NVR via its HDMI or VGA port
3. Connect the NVR and cameras to power (bigger 12V 2.5A or 12V 3A power
adapter for NVR, smaller 12V 1A or 12V 2A for cameras).
4. See FAQ #Q2 if you don't get any display on the screen; skip to 5 if you get
display.
5. About 1-2 minutes, you should see cameras' images on the screen.
6. Connect the NVR's WAN port to your router with a network cable.
7. Plug the mouse (included) into a USB port on back of NVR. You should then be
able to operate the system.
7. Network setting -Get the system ONLINE
Without Internet connection, the system will still allows you to do everything locally.
However, getting the system ONLINE makes it capable of doing more remotely using
your smart phone or PC.
When you have finished connecting and see the cameras' images on the screen,
please click “ok”to continue.
Default ID: admin
Password: none (means leaving the password empty, just click OK)
Tips: To protect your privacy, please set your password at your earliest convenience.
Right click→go to System Setup→System Admin→User to set password. Password
should be no more than 10 letters or numbers.
To learn more information about the network status, right click, go to System setup
→Network setup, you will see Cloud ID is ONLINE and Network status is Healthy
Network.
If not, please make sure the boxes next to DHCP and Enable (next to Net Diagnose
Info) are checked. Within minutes you should see the NVR obtain the IP address and
will go ONLINE automatically, Click OK.
8. Viewing the Camera on Smart Phone
①View on mobile APP
Step1.Download the APP and install it on your phone.
----Please search “ARCCTV”in Google play or Apple store and install it on your phone.
Step2. Run the ARCCTV APP and register an account (for first time using) and then
login.
Step3. Click “+”, then click “Add a video recorder”.
Step4.
Cloud ID: you can find it in the NVR's Network Setting
User Name: default user name is "admin"
Password: Default password is nothing. Leave blank.
Tips: If you have already set the password for your NVR, please enter it. Remember it
is the NVR system's password, not APP's password.
Step5. On your device list, click it to view the cameras.
②Playback on mobiles
In the ARCCTV App, while viewing live video through the system, click Playback. You
will enter the remote playback menu. The App will automatically playback camera1.
You can switch channels by choosing the CH.
9. Viewing Camera on Computer or Laptop by IE.
You can view camera on computer or Laptop by IE in locate or remotely.
Step1. Open IE browser on your computer or Laptop, go to "www.dvr163.com". (If
you don't have IE browser, please download it first)
Step2. Choose English first, Click User name login→Input your username and
password →click login. If this was the first time that you use it, please click “New
account”to apply an account.
Tips: If you have an account on your phone APP, then you can use the same account
to login.
Step3. Input the following information and click “Add’’ to add the camera systems.
Cloud ID: Please input your Cloud ID (find it in the NVR's Network Setting, or right bottom
corner of the screen).
Device set name: Name it yourself.
Device user name: This is NVR system’s default user name, if you hadn't changed it, it should
be admin.
Device password: This is NVR system’s default password, if you hadn't changed it, it should
be blank. If you have modified the password, please enter the password which you
had set.
Step4. Click Live Online and Click install Update Controls. When you install the plug-in
file, please choose the English language.
Tabla de contenidos
Otros manuales de Sistema de seguridad de Anran
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario