Anker PowerConf Manual de usuario
Anker PowerConf
User Manual
English 01
Deutsch 09
Español 17
Français 25
Italiano 33
Português 41
Pусский 49
日本語 57
묻펂 65
皍⡤⚥俒 73
籖넒⚥俒 81
Δϳ˶Α˴έ˴όϟ 89
ʺʩ ʑ
ʸʡ 97
EN 01
At a Glance
4 6
8 9 107
2 31 5
131211
1Multi-function button 8Power button
2
Volume down button
9
Bluetooth button
3Mute button 10 Bluetooth LED
4Phone call button 11 USB port (Type-A) for charge out
5Volume up button 12 Audio output port
6
Status LED
13
USB port (Type-C) for charge in
7Power LED
02 EN
Connecting
a) Connect to your computer by using a USB cable.
b) Connect to your computer or mobile device via
Bluetooth pairing.
Power on this product for the first time, it will automatically enter the
Bluetooth pairing mode.
Anker PowerConf
EN 03
1SFTT &OUFS#MVFUPPUIQBJSJOHNPEF
Flashes blue Bluetooth pairing
Steady blue Bluetooth connected
• Each time you power on the product, it will automatically connect with
the last successfully connected device if available.
• To disconnect Bluetooth, press the Bluetooth button again.
Powering On/Off
Press and hold the power button for 2 seconds to power on. The status LED
will light on clockwise and then fade out. To power off, press and hold the
power button for 2 seconds.
04 EN
Power LED behavior
Steady white Power on
Light off Power off
• Once connected to your computer, it will automatically power on.
• It will automatically power off after 30 minutes of inactivity or no source.
Button Controls
Press or press and hold Volume up / down
Press Answer / End a call
Press and hold for 2 seconds Reject a call
Press Mute or restore the
microphone
Press Play / Pause music
EN 05
Status LED behaviors
Lights up white for 2 seconds USB connected to computer
Breathes green Coming call
Lights up blue partly Sound direction detected
Lights up blue clockwise or
counterclockwise Increase or decrease volume
Turns red Muted
Lights up green Press Power button to check the battery level
Charging
a) Charging this product
06 EN
Power LED behavior
Steady red Being charged
Steady white Fully charged
Flashes red Low battery
b) Charging an external device
• When powered off or being charged, it won’t charge out.
• When the remaining battery is less than 30%, the charge out current will
be 5V 1A; if less than 10%, it won’t charge out.
EN 07
Audio Output
Connect an external speaker to the AUX jack of this product by using an AUX
cable (not provided). The audio will be played through the speaker.
Soundcore App
Download the Soundcore app for the software updates.
Soundcore
Apple and the Apple logo are trademarks
of Apple Inc.
Google Play and the Google Play logo are
trademarks of Google Inc.
08 EN
Specifications
5RGEKƂECVKQPUCTGUWDLGEVVQEJCPIGYKVJQWVPQVKEG
Charge input 5V 2A
Charge out 5V 2.1A
Rated output power 3W RMS
Battery capacity 6700 mAh
Charging time 4 hours
Talktime 24 hours
Driver size 1 x 1.75” (full range)
Frequency response 20 Hz - 20 kHz
Bluetooth version V 5.0
Bluetooth range 10 m / 33 ft
Otros manuales para PowerConf
3
Tabla de contenidos
Idiomas:
Otros manuales de Teléfono de Anker
Anker
Anker PowerConf Manual de usuario
Anker
Anker PowerConf S3 Manual de usuario
Anker
Anker A3301 Manual de usuario
Anker
Anker PowerConf S500 Manual de usuario
Anker
Anker PowerConf+ Manual de usuario
Anker
Anker PowerConf S500 Manual de usuario
Anker
Anker PowerConf S3 Manual de usuario
Anker
Anker PowerConf Manual de usuario
Anker
Anker PowerConf S330 Manual de usuario
Anker
Anker PowerConf+ Manual de usuario
