ANCEL V6 Manual de usuario
Table of Contents
1 Statement............................................................................................... 1
1.1 Agreement.....................................................................................1
1.2 Copyright information...................................................................1
1.3 Disclaimer......................................................................................2
1.4 Safety Information.........................................................................2
1.4.1 Inspection Precautions.......................................................3
2 Product description............................................................................... 6
2.1 Product Overview..........................................................................6
2.2 The front view of Ancel V6 tablet................................................. 7
2.3 The top view of Ancel V6 tablet....................................................8
2.4 The back view of Ancel V6 tablet..................................................9
2.5 The product specifications............................................................ 9
3 Product software introduction........................................................... 11
3.1 Diagnosis..................................................................................... 11
3.2 Hot function................................................................................ 15
3.3 Update......................................................................................... 15
3.4 Data Manager..............................................................................17
3.5 Quick Support..............................................................................17
3.6 DTC Query....................................................................................18
3.7 Feedback......................................................................................19
3.8 Settings........................................................................................ 20
4 Product activation................................................................................24
5 Cleaning and maintenance and warranty....................................... 26
5.1 Cleaning and maintenance..........................................................26
5.2 Warranty......................................................................................27
1
1 Statement
You must carefully read the instruction manual, especially the
safety instructions, before you can connect, commission and
operate the products of OBDSPACE TECHNOLOGY CO., LTD.,
Ltd. (hereinafter referred to as “OBDSPACE”).
1.1 Agreement
Once the product is used, it is an endorsement of the following:
(1) Please refer to the packing list of the random distribution for the
configuration equipment of this product, whichever is the actual
product;
(2) The functions and pictures described in this manual are subject
to the actual software. All information, specifications and
illustrations in the manual are the latest information at the time of
publication. The company reserves the right to change it without
notice.
1.2 Copyright information
It cannot be copied or stored in any form(electronic, mechanical,
photocopying, recording or otherwise) without prior written
permission being secured from OBDSPACE. Software and data are
owned by technology and protected by copyright laws, international
2
contract law, and other national laws. It is strictly forbidden to copy
or transfer the data and software or some of the contents. If there is
any violation, the technology will be held legally responsible
according to law.
1.3 Disclaimer
(1) This manual only provides the operation and operation
methods for Ancel V6. The company does not assume any
responsibility for the consequences caused by using the operation
methods for other equipment operations.
(2) The company shall not accept any responsibility for accidents
caused either by the user personally or anyone else, or costs and
expenses due to equipment damages including equipment loss
caused by the user’s abuse or misuse, arbitrary changes or repairs
or operation of the equipment in a manner not in accordance with
the manual requirements.
1.4 Safety Information
For the safety of yourself and others, and to avoid damage to
equipment and vehicles, all personnel handling the equipment must
read the safety precautions mentioned in the manual.
3
1.4.1 Inspection Precautions
(1) Ancel V6 can only be connected to a safety outlet that is
grounded. Before connecting, check and confirm that the diagnostic
circuit is in good condition. Otherwise, it is not necessary to test to
avoid damage to the main unit. If necessary, use a multimeter to
measure the diagnostic seat voltage.
(2) Use only the power cord supplied with the OBDSPACE
diagnostics or detected power line.
(3) Pay special attention to the effects or damage caused by
environmental factors such as acid and alkali, poison gas, and
heavy pressure.
(4) Exhaust gases from the engine contain a variety of toxic
compounds and should be avoided. Park the vehicle in a well
ventilated area before operation.
(5) Do not place the device on the vehicle's power distribution unit.
Strong electromagnetic interference can cause damage to the
equipment.
(6) After the equipment is installed successfully, before starting the
engine, make sure that the parking brake is pulled and the speed
lever is placed in the neutral or parked position to avoid accidents
when the vehicle is started.
(7) When the engine is running at a high temperature, avoid
4
contact with high temperature components such as the water tank
and the exhaust pipe. At the same time, be careful of the voltage
generated by the components such as the ignition coil, the
distributor cover, the ignition circuit and the ignition plug during
engine operation.
1.4.2 Notes on the use of the instrument
(1) This instrument is a precision electronic instrument. Do not
drop it. Handle it as gently as possible, away from heat and
electromagnetic fields.
(2) Ensure that the instrument and diagnostics are well connected
so that signal interruptions do not affect the test.
(3) Use screws as much as possible when using the cables and
connectors to avoid disconnecting and damaging the connectors
when moving. Hold the front end of the connector when pulling the
connector, and avoid pulling the rear cable to avoid damage to the
diagnostic interface.
(4) When the electrical components are energized, the circuit
cannot be disconnected to prevent self-inductance, mutual
inductance and current sensors and the vehicle ECU.
(5) The operation of this instrument requires a certain basis for
vehicle inspection and maintenance, and has a certain
understanding of the electronic control system of the vehicle under
test.
1.4.3 Operating car ECU considerations
5
When performing diagnostic operations on a vehicle equipped with
a computer control system, the following should be noted:
(1) Do not place magnetic objects such as radio speakers close to
the computer, as the magnetic properties of the speakers can
damage the circuits and components in the ECU.
(2) When the ignition switch is turned on, the internal electrical
equipment of the car must not be disconnected. Due to the
self-inductance of the coil when disconnected, a high instantaneous
voltage will be generated, which will cause damage to the sensor
and ECU;
(3) When performing repairs near a computer or sensor, special
care should be taken to avoid damage to the ECU and sensor;
(4) When carrying out maintenance work on or near the
ECU-controlled digital meter, be sure to wear a metal strap with one
end clamped to the body and the other end wrapped around the
wrist;
(5) When performing welding work on a car, the ECU system
power should be turned off beforehand;
(6) Do not use test lights to test ECU-related electrical devices to
prevent damage to the ECU or sensor unless specifically stated;
(7) Test ECU and sensors cannot be tested with a pointer-type
ohmmeter, unless otherwise specified in the test procedure, but
should be tested with a high-impedance digital meter.
6
2 Product description
2.1 Product Overview
Ancel V6 is a proffessional efficient and convenient diagnistic tool
for passenger car.
Powerful quad-core Cortex-A53 2.0GHz processor with faster
2GB LPDDR4 and reliable 32GB On-board memory
Android 10.0 OS running on 8.0 inch IPS Multi-touch
capacitive touch screen
Unique ergonomic design with rubberized outer protection and
a rugged internal housing
Built-in rechargeable lithium-polymer battery for up to 10 hours
of continuous operation
OE-Level full-systems coverage for more than 80 vehicle
makes
Supporting 15 most commonly used service Reset Functions,
more to cover soon
Remote Technical Support via Teamviewer
7
2.2 The front view of Ancel V6 tablet
No.
Name
Description
①
Power Indicator
Lights on green when power on and the
battery is higher than 20%
Lights on red when power on and the
battery is lower than 20%
Lights on blue when it is charging
Lights on green when it is full charge
②
Communicaiton
Indicator
The light flashing when diagnose
communication
Tabla de contenidos
Otros manuales de Equipo de diagnóstico de ANCEL
ANCEL
ANCEL FX2000 Manual de usuario
ANCEL
ANCEL EU510 Manual de usuario
ANCEL
ANCEL S1000 Manual de usuario
ANCEL
ANCEL HD Series Manual de usuario
ANCEL
ANCEL X6 Manual de usuario
ANCEL
ANCEL AD410 Manual de usuario
ANCEL
ANCEL X6 HD Manual de usuario
ANCEL
ANCEL VD500 Manual de usuario
ANCEL
ANCEL HD Series Manual de usuario
