ANCEL HD Series Manual de usuario
HD series
1
Contents
1 Product Overview............................................................3
2 Product Structure............................................................4
3 Host Configuration......................................................... 5
4 Printer Configuration (Optional)..................................6
5 POWER on/off..................................................................6
1) Power on........................................................................... 6
2) Power off...........................................................................7
6 Vehicle Diagnostic Preparation.................................... 7
7 Introduction of Each Function Menu........................ 10
8 Diagnostic Function......................................................12
9 DPF Regeneration......................................................... 17
10 Pin Detect................................................................... 18
11 Data Management.................................................... 19
12 Diagnostic Software Upgrade.................................19
13 Settings....................................................................... 20
13.1 Wi-Fi Connection................................................. 20
13.2 Brightness............................................................. 21
13.3 Volumes................................................................ 21
13.4 User Information and Activation.........................22
1) Activation....................................................................
22
2) User Info.....................................................................
23
13.5 Storage..................................................................23
HD series
2
13.6 General..................................................................24
1) Language...................................................................
24
2) Unit..............................................................................
24
3) Date&Time.................................................................
24
4) Reset...........................................................................
25
14 Printer Introduction.................................................. 25
1) Printer combination and split...................................
25
2) Printer loading and changing paper.......................
26
3) Printer self-test function...........................................
27
HD series
3
1 Product Overview
Ancel HD series products are commercial vehicle diagnostic
tools based on special Android tablet.
This product integrates commercial vehicle OBD standard
diagnostic protocols, including SAE J1939, SAE J1708, SAE
J1850 PWM, SAE J1850 VPW, ISO 14230-4, ISO 9141-2, ISO
15765-4 and ISO 27145-4. The commercial vehicles are
classified according to the vehicle type information, and the
operation interface is very clear, which makes it convenient for
users to diagnose commercial vehicles.
There’s a optional printer module available to have diagnosis
data and report printed. At the same time, the product supports
online upgrade of diagnostic program and diagnostic data.
HD series
4
2 Product Structure
HD series
5
Serial No.
Name
Function Description
1
Main Testing
Cable
Connection interface connects
vehicle communication cable during
vehicle diagnosis
2
USB Port
Used to connect to an external
computer
3
Print
Used to print diagnostic reports and
results
4
Paper bin
cover
After opening, you can install and
replace the printing paper
5
Touch
screen
Display content and touch operation
area
6
Speaker
Device sound output
7
Auxiliary
bandage
Auxiliary for hand holding
8
Separation
switch
Host and printer separation switch
9
Test key
Printer self-test and paper feed
button
10
Paper outlet
Printer paper outlet
3 Host Configuration
CPU
Quad-Core ARM Cortex-A7
RAM
1GB
Flash
8GB
Display
5 inches LCD，resolution ratio 800*480
HD series
6
TP touch screen
Capacitive screen
WIFI
802.11b/g/n 2.4GHz
Horn
Support
USB interface
Type C interface
Diagnose
interface
DB15 interface
Operating
voltage
DC 10V~24V/3A
Operating
temperature
-20℃~60℃
Storage
temperature
-30℃~70℃
4 Printer Configuration (Optional)
Printer
80mm thermal printer
Print speed
60mm/s
Effective print width
72mm
Print resolution
203dpi 1mm=8dots
Print paper
specifications
80mm*30mm
5 Power On/Off
1) Power on
The device can be powered on in the following ways:
Vehicle power on: plug one end of the main diagnostic test line
into the DB-15 interface of the device, and the other end into the
diagnostic interface of the vehicle, and the device will
HD series
7
automatically start up . If it doesn’t started up, it may be that
there is no power supply for the vehicle diagnostic seat, and the
device can be powered by the cigarette lighter or battery clamp.
Power on the power adapter: plug one end of the main
diagnostic test line into the DB-15 interface of the device,
connect the power adapter, and the device will start
automatically.
Note: the voltage of the power supply should be within the
scope of application of the product equipment. If it is
beyond the scope, the product may be damaged.
2) Power off
Before power off, please stop all diagnostic items and return
back to the main interface.
Pull out the diagnostic main test line from the diagnostic
interface of the vehicle. If the device is not equipped with battery,
the device will shut down automatically after disconnecting the
main test line from the diagnostic interface of the vehicle.
6 Vehicle Diagnostic Preparation
The diagnostic program establishes data connection through the
vehicle electronic control system connected with the equipment,
which can read the vehicle diagnostic information, view the data
flow, and perform action test and other functions. For details of
the functions, please refer to the model which you purchased.
To establish good communication between the diagnostic
program and the vehicle, the following operations need to be
performed:
1) Turn off the ignition;
HD series
8
2) Find the diagnostic interface of the vehicle: it is usually
located on the driver side; If the diagnostic interface is not found,
please refer to the vehicle maintenance manual.
3) Insert one end of the diagnostic main test line into the
device DB-15 connector and tighten the retaining screws. The
other end is connected to the vehicle's diagnostic interface.
Note: Before the equipment is connected to the vehicle, it is
necessary to judge whether the diagnostic seat of the
vehicle is a standard OBD-II interface or a non-standard
OBD-II interface.
The vehicle compatible with OBD-II management system
only needs to use the integrated main test line OBD
connector to connect with the vehicle diagnosis seat and
provide power;
For vehicles that are not compatible with the OBD-II
management system, the corresponding connector should
be selected; Some vehicles need to be powered by other
vehicle power sources.
The following is an operation description of these two
connection modes.
1) Connection of standard OBD-II interface
The vehicle connected with standard OBD-II interface only
needs to use the integrated main test line OBD connector, and
no other connectors are needed, as shown in the figure:
HD series
9
2) Connection of non OBD-II interface
Vehicles with non OBD-II interface need to connect the main test
line with the corresponding special connector, as shown in the
figure:
HD series
10
Note: at this time, the equipment is powered by the vehicle
diagnosis seat, and the equipment starts automatically. If not, it
may be that the vehicle diagnosis seat has no power supply, and
the equipment can be powered by the cigarette lighter or battery
clip.
7 Introduction of Each Function Menu
After the system is started, the main menu of function will be
entered. The main menu of each version of model will be slightly
different. Please refer to the display of the model you purchased.
1) Toolbar (see Table 1)
2) Function main menu (see Table 2)
Table 1: Toolbar
Icon
Function
name
Function description
Refresh
Refresh upgrade menu
Home
Return to the main interface of the system
Screenshot
Capture current screen picture
Test report
Used to save test data during diagnosis
(can be viewed in data management
menu)
Print
Used to print test results or test reports.
The printer is optional
Otros manuales para HD Series
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Equipo de diagnóstico de ANCEL
ANCEL
ANCEL X6 HD Manual de usuario
ANCEL
ANCEL HD Series Manual de usuario
ANCEL
ANCEL V6 Manual de usuario
ANCEL
ANCEL VD500 Manual de usuario
ANCEL
ANCEL S1000 Manual de usuario
ANCEL
ANCEL EU510 Manual de usuario
ANCEL
ANCEL AD410 Manual de usuario
ANCEL
ANCEL X6 Manual de usuario
ANCEL
ANCEL FX2000 Manual de usuario
