Amprobe 15XP-A Manual de usuario

5XP-A

15XP-A

35XP-A

5XP-A

15XP-A

35XP-A

Compact

Digital

Multimeters

Users Manual

• Manual de uso

• Mode d'emploi

• Bedienungshandbuch

• Manuale d'Uso

Please Recycle

Visit www.amprobe.com for

• Catalog

• Application notes

• Product specifications

• Product manuals

CMY

pn2728995_cover_press.pdf 8/28/2006 10:38:26 AM

2A MAX

FUSED

CAT 600V

CAT 1000V

CAT 300V

COM A

MAX

1000V

750V

Hz Temp

400

1000

35XP-A

RANGE NON

CONTACT

VOLTAGE

HOLD

auto-off

°C

OFF

°F

1832 400

35XP-A

CMY

pn2728995_frontispiece_press.pdfPage 1 8/28/2006 11:29:22 AM

5XP-A

15XP-A

35XP-A

Compact Digital Multimeters

Users Manual

•Manual de uso

•Mode d’emploi

•Bedienungshandbuch

•Manuale d’Uso

PN 2728995

July 2006

5XP-A

15XP-A

35XP-A

Compact Digital Multimeters

Users Manual

•Manual de uso

•Mode d’emploi

•Bedienungshandbuch

•Manuale d’Uso

PN 2728995

July 2006

English

Limited Warranty and Limitation of Liability

Your Amprobe®product will be free from defects in material and workmanship for

1 year from the date of purchase. This warranty does not cover fuses, disposable

batteries or damage from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not authorized to

extend any other warranty on Amprobe®’s behalf. To obtain service during the

warranty period, return the product with proof of purchase to an authorized

Amprobe®Test Tools Service Center or to a Amprobe®dealer or distributor. See

Repair Section above for details. THIS WARRANTY IS YOUR ONLY REMEDY. ALL

OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR STAUTORY -

INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE

OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL

NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some

states or countries do not allow the exclusion or limitation of an implied warranty or

of incidental or consequential damages, this limitation of liability may not apply to

you.

XP Series Digital Multimeters

Contents

Safety Information ..............................................................................................2

Symbols Used in this Manual .............................................................................3

Making Measurements........................................................................................3

Verify Instrument Operation.............................................................................3

Range Selection...............................................................................................3

Correcting an Overload (0o or -0o) Indication W............................................3

Measuring DC Voltage See Figure -1- .....................................................3

Measuring AC Voltage See Figure -2- .....................................................4

Preparing for Current Measurements...............................................................4

Measuring DC Current See Figure -3- .....................................................4

Measuring AC Current See Figure -4- .....................................................4

Measuring Resistance See Figure -5- .....................................................5

Testing for Continuity See Figure -6- .....................................................5

Testing Diodes See Figure -7- .....................................................5

Measuring Capacitance (35XP-A only) See Figure -8-..................................5

Measuring Temperature (35XP-A only) See Figure -9-.................................6

Measuring Frequency (35XP-A only) See Figure -10-...................................6

Measuring NCV (Non-Contact Voltage) See Figure -11- ...........................6

Testing Battery Voltage (5XP-A only) See Figure -12-..................................6

Testing Logic Levels (15XP-A only) See Figure -13- ....................................7

Additional Features .............................................................................................7

Input Test Lead Warning..................................................................................7

MIN MAX Measurements (Model 5XP-A only).................................................7

Auto Power Off (Models 15XP-A and 35XP-A only).........................................7

HOLD Measurements.......................................................................................7

Product Maintenance..........................................................................................8

Cleaning...........................................................................................................8

Troubleshooting...............................................................................................8

Battery and Fuse Replacement See Figure -14- .......................................8

Repair .................................................................................................................9

Specifications ...................................................................................................10

2A MAX

FUSED

CAT 600V

CAT 1000V

CAT 300V

COM A

MAX

1000V

750V

200mA MAX

FUSED

BATT 1.5V

BATT 9V

CAT 600V

CAT 1000V

CAT 300V

VCOM mA

MAX

1000V

750V

LOGIC

15XP-A

RANGE NON

CONTACT

VOLTAGE HOLD

5XP-A

MIN MAX NON

CONTACT

VOLTAGE HOLD

1000750 200200

2020

200

20k

200k

20M

200m

20m

200

auto-off

OFF

200

20m

1.5V 9V

200

BATT

35XP-A

15XP-A5XP-A

2A MAX

FUSED

CAT 600V

CAT 1000V

CAT 300V

COM A

MAX

1000V

750V

Hz Temp

400

1000

RANGE NON

CONTACT

VOLTAGE HOLD

auto-off

˚C

OFF

˚F

1832 400

35XP-A

Safety Information

•The XP Series Digital Multimeters conform to EN61010-1, Rev-2; CAT I 1000 V,

CAT II 600 V, CAT III 300 V, class 2 and pollution deg.2; CSA 22.2 -1010-1.

•This instrument is EN61010-1 certified for Installation Category I (1000V). It

may only be used to make measurements on energy limited circuits within

equipment and not directly connected to mains.

•This instrument is EN61010-1 certified for Installation Category II (600 V). It is

recommended for use with local level power distribution, appliances, portable

equipment, etc, where only smaller transient overvoltages may occur, and not

for primary supply lines, overhead lines and cable systems.

•This instrument is EN61010-1 certified for Installation Category III ( 300 V). It is

recommended for use in distribution level and fixed installations, as well as

lesser installations, and not for primary supply lines, overhead lines and cable

systems.

•Do not exceed the maximum overload limits per function (see specifications)

nor the limits marked on the instrument itself. Never apply more than 1000 V

dc/750 V ac rms between the test lead and earth ground.

•Inspect the DMM, test leads and accessories before every use. Do not use any

damaged part.

•Never ground yourself when taking measurements. Do not touch exposed

circuit elements or test probe tips.

•Do not operate the instrument in an explosive atmosphere.

•Exercise extreme caution when: measuring voltage >20 V // current >10 mA //

AC power line with inductive loads // AC power line during electrical storms //

current, when the fuse blows in a circuit with open circuit voltage >1000 V //

servicing CRT equipment.

•Always measure current in series with the load – NEVER ACROSS a voltage

source. Check fuse first. Never replace a fuse with one of a different rating.

•Remove test leads before opening the case.

Symbols Used in this Manual

B Battery WRefer to the manual

TDouble insulated XDangerous Voltage

FDirect Current JEarth Ground

BAlternating Current RAudible tone

I Fuse )Canadian Standards Association

Complies with EU

directives zNon-contact Voltage

Making Measurements

Verify Instrument Operation

Before attempting to make a measurement, verify that the instrument is operational

and the battery is good. If the instrument is not operational, have it repaired before

attempting to make a measurement.

Range Selection

In addition to autoranging (Models 15XP-A and 35XP-A only) you can manually

select and lock a range by pressing the RANGE button. RANGE appears on the

display to indicate that manual ranging is active and the range is locked. When

appropriate, each subsequent press of the range button steps the meter to the next

higher range. When the highest range is reached the next press returns the meter

to the lowest range. To return to autoranging press the RANGE button. If RANGE

still shows on the display, autoranging is not available for the selected function.

Use autorange for all initial measurements. Then, when appropriate, use the RANGE

button to select and lock a range.

XWWarning

To avoid electrical shock while manual ranging, use the display

annunciators to identify the actual range selected.

Correcting an Overload (0o or -0o) Indication W

An 0o or -0o indication may appear on the display to indicate that an overload

condition exists. For voltage and current measurements, an overload should be

immediately corrected by selecting a higher range. If the highest range setting does

not eliminate the overload, interrupt the measurement until the problem is identified

and eliminated. The 0o indication is normal for some functions; for example,

resistance, continuity, and diode test.

Measuring DC Voltage See Figure -1-

1. Set the Function Switch to v.

2. Select the desired RANGE. The default DC voltage range is 2 V on the 15XP-A

and 4 V on the 35XP-A.

3. Connect the test leads: Red to E, Black to COM.

4. Connect the test probes to the circuit test points.

5. Read the display, and, if necessary, correct any overload (0o) conditions.

Measuring AC Voltage See Figure -2-

1. Set the Function Switch to V.

2. Select the desired RANGE. The default AC voltage range is 2 V on the 15XP-A

and 4 V on the 35XP-A.

3. Connect the test leads: Red to E, Black to COM.

4. Connect the test probes to the circuit test points.

5. Read the display, and, if necessary, correct any overload (0o) conditions.

Preparing for Current Measurements

•Turn off circuit power before connecting the test probes.

•Allow the meter to cool between measurements, if current measurements

approach or exceeds 2 amps.

•A warning tone sounds if you connect a test lead to a current input while a

current function is not selected.

•Open circuit voltage at the measurement point must not exceed 1000 V.

•Always measure current in series with the load. Never measure current across a

voltage source.

Measuring DC Current See Figure -3-

1. Set the Function Switch to a current function, µA, mA, or A.

2. Select the desired RANGE (5XP-A only).

3. Connect the test leads: Red to mA or A, Black to COM.

4. Turn off power to the circuit being measured.

5. Open the test circuit (X) to establish measurement points.

6. Connect the test probes in series with the load (to the measurement points).

7. Turn on power to the circuit being measured.

8. Read the display, and, if necessary, correct any overload (0o or -0o) conditions.

Measuring AC Current See Figure -4-

1. Set the Function Switch to a current function and range, µA, mA, or A.

2. Select the desired RANGE (5XP-A only).

3. Connect the test leads: Red to mA or A, Black to COM.

4. Turn off power to the circuit being measured.

5. Open the test circuit (X) to establish measurement points.

6. Connect the test probes in series with the load (to the measurement points).

7. Turn on power to the circuit being measured.

8. Read the display, and, if necessary, correct any overload (0o) conditions.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Multímetro de Amprobe

Amprobe

Amprobe HD110C Manual de usuario

Amprobe

Amprobe AM-420 Manual de usuario

Amprobe

Amprobe AC75B Manual de usuario

Amprobe

Amprobe HD110C Manual de usuario

Amprobe

Amprobe AM-250 Manual de usuario

Amprobe

Amprobe AM-500 Manual de usuario

Amprobe

Amprobe AC75 Manual de usuario

Amprobe

Amprobe AD40B Instrucciones de funcionamiento

Amprobe

Amprobe AM-140 Manual de usuario

Amprobe

Amprobe AM-140-A Manual de usuario

Amprobe

Amprobe Hexagon 60 Manual de usuario

Amprobe

Amprobe CDM-1 Manual de usuario

Amprobe

Amprobe AM-34 Manual de usuario

Amprobe

Amprobe 30XR-A-D Manual de usuario

Amprobe

Amprobe ACDC-400 Manual de usuario

Amprobe

Amprobe ACD-14 PLUS Manual de usuario

Amprobe

Amprobe DM7C Manual de usuario

Amprobe

Amprobe KWC-2000 Manual de usuario

Amprobe

Amprobe AD105A Manual de usuario

Amprobe

Amprobe AC71B Manual de usuario

Amprobe

Amprobe ACD-6 Pro Manual de usuario

Amprobe

Amprobe AC71B Manual de usuario

Amprobe

Amprobe DM7C Manual de usuario

Amprobe

Amprobe 30XR-A Manual de usuario

Manuales populares de Multímetro de otras marcas

Agilent Technologies

Agilent Technologies 34420A Manual de usuario

Fluke

Fluke 83 Manual de usuario

Hameg

Hameg HM 8012 Manual de usuario

Mastech

Mastech MY70 Manual de usuario

Steren

Steren MUL-300 Manual de usuario

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manual de usuario

PeakTech

PeakTech 4000 Manual de uso y cuidado

YOKOGAWA

YOKOGAWA 90050B Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manual de usuario

Fluke

Fluke 8846A Manual de operación y mantenimiento

Tempo Communications

Tempo Communications MM200 Manual de usuario

Elenco Electronics

Elenco Electronics CM-1555 Manual de usuario

Mastech

Mastech MS8238C Manual de usuario

SDAR

SDAR 830A, 830B, 830D, 830C Manual de usuario

RS PRO

RS PRO RS-9519BT Manual de usuario

BGS technic

BGS technic 8890 Manual de usuario

Morris

Morris 57074 Manual de usuario