ampridge MightyMic Pro Manual de usuario
AmpRidge
MightyMic Pro
Multi-Function Smartphone
Wireless Microphone
User Manual
MightyMic Pro User Manual
1
Thank you for choosing the MightyMic Pro Bluetooth microphone. In order to use the mic as
a wireless microphone you will need to use a compatible App such as MoviePro or FilmicPro
for video recording or MightyMic Pro Recorder for audio recording. Please check our website
for the latest info on Apps and features
Safety Rules
● To ensure your safety before using the MightyMic Pro please carefully read through this
user manual
● Be wary of any sharp edges, uneven surfaces, metal parts, accessories and their
packaging so as to prevent any possible injuries to you or to the microphone
● Do not modify, repair, or dismantle the microphone. Do so may result in fire, electric
shocks, complete failure of this device, etc. All of which are not covered un the warranty
● Do not use any solvents or volatile liquids to clean the MightyMic Pro
● Do not use the MightyMic Pro in a hazardous location
● The package contains small parts. Please keep away from children
● You must select a qualified charger from a reliable manufacturer
● Do not use the USB charging cable on any other device because of possible damage
This unit contains Li-ion polymer batteries. Li-ion Polymer batteries are volatile. Failure to
read and follow the safety instructions may result in fire, personal injury and damage to
property if charged or used improperly. By purchasing and using this unit the buyer assumes
all risks associated with Li-ion batteries. Please dispose of properly
Introduction
●Bluetooth 5.0 Profile
●Up to 30 feet working range
●High quality internal microphone
●USB-C charging port with external battery support
●Supports external 3.5mm Smartphone microphones
●Internal/External microphone switch
●3 Position Auto-Gain microphone sensitivity switch
●Up to 9 hour rechargeable internal battery
●Auto-Shutoff if unpaired for 5 minutes
●Music Player/Telephone functions built-in
●Dual Cell-Phone pairing option
●Integrated clip for shirt, tie or belt mounting
Key Features
MightyMic Pro User Manual
2
General Functions
Function Required Action
Turn On Press and hold the “MF” button until the LED begins to flash. It
will normally auto-connect if previously paired
Pairing Mode When the device is OFF hold the “MF“ button until the blue/red
LED’s begins to flash. Pair the microphone to your device. The
microphone will turn off if not paired for 5 minutes
LED Indicator Light Flashing Blue-Power On and Paired
Flashing Blue/Red-Pairing mode
Quick flashing Red 3 times-Low Power warning
Turn Off
Hold the “MF“ button until the blue LED turns off to conserve
battery usage. The microphone will not automatically shut off if
not in use but will shut off if not paired for 5 minutes
Multi-Function (MF)
Button
Press the “MF” button for power ON/Off, to pause/play music or
for telephone functions
Delete Pairing
When powering on hold the “MF” button for about 8 seconds until
it powers on then turns off.
Battery Power Status Battery status will be shown on the top right corner of the phone
screen after paired. (Only on IOS devices)
Phone Calls See Phone Function Section
External
Microphone/
Headphone
Jack
Microphone
Power/
Multi-Function
Button (MF)
LED Status
Indicator
Microphone
Sensitivity
Switch
Internal/External
Microphone
Selector
USB-C Charging
Port
Volume/Next
Song Buttons
Description
MightyMic Pro User Manual
3
Pairing to an IOS or Android device
To use your Bluetooth Microphone, you must first pair it with a device. Once your
Bluetooth Microphone is paired to a specific device, they will remain paired while they
are within range.
Pairing Instructions:
● Turn on your Phone or device and insure the Bluetooth function is activated
● Hold the “MF” button on the front of the microphone until the blue/red LED’s begins
to flash
● In the Settings App on the device select the Bluetooth option. Look for a Bluetooth
device listed as “MightyMic Pro” to pair it to the Microphone
● The display should change from “Not Paired” to “Connected. If not, tap the device
listed to pair
● If you have paired before you may just need to touch the “MightyMic Pro” device to
reconnect or it may connect Automatically
Using the MightyMic Pro Microphone
For best results use in an open space without any barriers between the
microphone and the phone. People especially can cause interference.
We highly recommend you set your phone to airplane mode with Bluetooth
enabled otherwise you may have recordings interrupted by unwanted calls
To hear playback audio while the Bluetooth microphone is paired connect
headphones to the microphone or turn off Bluetooth to listen through the phone.
For IOS devices, open the Control Center and select the airplay button to
manually choose the desired playback option.
Pause Press the “MF” button to pause the music
Volume Up Hold down the “+” button to increase the volume
Volume Down Hold down the “-” button to decrease the volume
Next Track Quickly press the “+” button to move to the next track
Previous Track Quickly press the “-” button to move to the previous track
Music Functions
Using the Monitor Function
Many Apps support audio monitoring while recording. Connect headphones to the
3.5mm jack on the MightyMic Pro or into the monitor jack on the microphone to hear
sounds returned from the App. Due to transmission functions there will be some delay
of the monitor signal. This delay will not occur on the recording.
MightyMic Pro User Manual
4
LED Status LED Indication
Power On The Blue LED will flash twice when connected
Power Off The Blue LED will flash once then the Red LED will flash once
Pairing The Red and Blue LED’s will flash alternately
Unconnected The Blue LED will flash once every second
Standby Mode The Blue LED will flash twice every 3 seconds
Connected Standby Mode The Blue LED will stay ON continuously
Connected Working Mode The Blue LED will flash once every 5 seconds
Multi Point Connection The Blue LED will stay ON continuously
. The LED may flash
differently depending on the type of phone
Low Battery Power The Red LED will flash 3 times quickly
Charging The Red LED will stay ON continuously
Fully Charged The Red LED will turn OFF
LED Indicators
Using the MightyMic Pro for video recording
1) Connect the Bluetooth microphone before the app starts. You may need to select the
Bluetooth mic as an option in the settings of the App
2) With some Apps, if the Bluetooth microphone is connected after the app starts, the
Bluetooth microphone will start automatically and the microphone symbol may turn blue
to indicate a Bluetooth Microphone is active
3) If the Bluetooth Microphone is disconnected while the app is active, the app switches
back to the built-in microphone.
4) To confirm the microphone is connected do a test recording or go into the Settings
section. Upon leaving the Settings section the Bluetooth microphone normally will
become active again.
5) A video App is needed such as FilmicPro or MoviePro (IOS) or Cinema FV-5 (Android)
to do Bluetooth video recording. Please check our website for updates regarding this or
other supported Apps.
6) You may hear an audio delay while monitoring the recording. This is normal. This delay
will not occur on the recording
Using the MightyMic Pro for audio recording
The MightyMic Pro will support audio App’s designed to work with external Bluetooth
devices.
An audio App is needed such as the MightyMic Pro Recording App (IOS) to do Bluetooth
audio recording. Please check our website for updates regarding this or other supported
Apps.
MightyMic Pro User Manual
5
Function Required Action
Answer a Call Quickly press the “MF” button to answer the call
Rejecting a Call Press the “MF” button for about 1 second to reject a call
Select Audio Output After receiving a call, Press the “MF” button for about 1 second to
hear the call through the phone or Bluetooth unit
Ending the Call
Quickly press the “MF” button to end the call or end the call on your
phone
Redial the Last Number
Quickly press the “MF” button twice to redial the last phone number
Answer two calls at the
same time
Hold the “MF” button for about 1 second to answer the second call.
Hold the “MF” button again for 1 sec to switch
Answer two calls one by
one
Quickly press the “MF” button to end the first call. You can then
quickly press the “MF” button again to answer the second call or hold
for 1 second to reject the call
Voice Assistant (Siri)
Hold the “MF” button for about 1 second to start the voice assistant for
your phone
Phone Functions
Charging the Device
Make sure that your device is fully charged before the initial use.
The MightyMic Pro includes a USB-A to USB-C charging cable. This allows you to use any standard
phone charger (not included) to charge the Bluetooth device.
The USB-C connector is a much higher quality than other micro-USB charging ports and can pass
more power for faster charging
Insert the USB terminal of your charging cable into a USB-A Type phone charger and connect the
other terminal to the USB-C jack on the microphone. While charging, the red LED on the front will
remain on. When charging is completed, the LED will turn off
The MightyMic Pro can operate while charging or while being powered by an external battery source
Note: The USB-C charging port does not support data transfer. It is for charging only.
Pairing two Bluetooth devices to one Phone
Depending on the phone and App you may be able to pair the MightyMic Pro microphone and another
type of Bluetooth device at the same time. Such as a Bluetooth gimbal device and Bluetooth
microphone. If the combination does not work correctly you may need to change the pairing order to
get satisfactory results.
Reset the Device
Press the “MF” button for about 8 seconds with the power off. The red and blue LED’s will flash once
then the unit will enter into the pairing mode. Remove previous pairings from the device and re-pair
MightyMic Pro User Manual
6
Pair with two Phones
Use this function to receive phone calls from two different phones
● Pair the microphone to the first phone
● Press the “MF” button twice quickly to turn it into the pairing mode. The red and blue LED’s
will begin to flash to indicate the pairing mode.
● Pair the microphone to the second phone
● The two phones are now paired with the microphone
Note: The microphone will pair with the last paired phone automatically when powered on again.
Please make sure to enable the Bluetooth function when powering on again.
Note: You can only play music or record from one phone with 2 connections
If you wish to disconnect the paired phone and connect another phone you can press and hold
the “MF” button for about 5 seconds. The microphone will turn into the pairing mode again and
the blue and red LED’s will begin flashing again.
Microphone Sensitivity Adjustment
The microphone has auto gain adjustment. This feature sets the ideal sensitivity while
listening to the speaking volume. Speak for about 5 seconds near the microphone to set the
ideal volume before recording.
Best performance is normally achieved using an external microphone with the sensitivity
set to High (H)
The default sensitivity is set to High when the device is shipped. The options are as follows:
●High (H): 0 dB (Typical for most microphones and situations)
●Medium (M): - 3 dB (Typical for some external microphones)
●Low (L): - 6 dB (Typical for high volume external microphones)
To change the sensitivity move the sensitivity switch on the side of the device. You may hear
increased noise in the M and L positions.
Note: You may hear some popping when changing sensitivity or microphone input options. This is
normal and not recommended to change while recording.
External Microphones
The MightyMic Pro supports connecting external microphones designed for Smartphone
headphone jacks such as the MightyMic series of microphones. The microphone must have 4 pins
on the plug in order to work correctly. Earbuds with switches (Like EarPods) and 3-pin
microphones made for camera’s will not work with this device.
Simply insert the microphone into the headphone jack and move the switch from the internal
microphone setting (I) to the external microphone setting (E). To switch back to the internal
microphone you must move the switch back to the internal microphone setting (I) on the side of the
device.
Manual del usuario de MightyMic Pro
7
Micrófono externo /
conector para
auriculares
Micrófono
Potencia /
multifunción
Botón (MF)
Estado del
LED
Indicador
Interruptor de
sensibilidad de
micrófono
Selector de micrófono
interno / externo
Puerto de carga
USB-C
Botones de volumen
/ canción siguiente
Descripción
Funciones generales
Función Acción requerida
Encender Mantenga presionado el botón "MF" hasta que el LED comience
a parpadear. Normalmente se conectará automáticamente si
está emparejado previamente
Modo de emparejamiento Cuando el dispositivo esté apagado, mantenga presionado el
botón "MF" hasta que los LED azul / rojo comiencen a
parpadear. Empareja el micrófono con tu dispositivo. El
micrófono se apagará si no está emparejado durante 5 minutos.
Luz indicadora LED Azul parpadeante: encendido y emparejado Azul parpadeante /
rojo Modo de emparejamiento parpadeo rápido rojo 3 veces:
advertencia de bajo consumo
Apagar
Mantenga presionado el botón "MF" hasta que el LED azul se
apague para conservar el uso de la batería. El micrófono no se
apagará automáticamente si no está en uso, pero se apagará si
no está emparejado durante 5 minutos
Botón multifunción (MF) Presione el botón "MF" para encender / apagar, pausar /
reproducir música o para las funciones del teléfono
Eliminar
emparejamiento
Presione el botón "MF" para encender / apagar, pausar /
reproducir música o para las funciones del teléfono
Estado de energía de la
batería
El estado de la batería se mostrará en la esquina superior
derecha de la pantalla del teléfono después del emparejamiento.
(Solo en dispositivos IOS)
Llamadas telefónicas Ver la sección de funciones del teléfono
Manual del usuario de MightyMic Pro
8
Emparejamiento con un dispositivo IOS o Android
Para usar su micrófono Bluetooth, primero debe emparejarlo con un dispositivo. Una vez que su
micrófono Bluetooth esté emparejado con un dispositivo específico, permanecerán emparejados
mientras estén dentro del alcance.
Instrucciones de emparejamiento:
● Encienda su teléfono o dispositivo y asegúrese de que la función Bluetooth esté activada
● Hold the “MF” button on the front of the microphone until the blue/red LED’s begins to flash
● IEncienda su teléfono o dispositivo y asegúrese de que la función Bluetooth esté activada
● La pantalla debería cambiar de "No emparejado" a "Conectado". De lo contrario, toque el
dispositivo que aparece para emparejar
● Si se ha emparejado antes, es posible que solo necesite tocar el dispositivo "MightyMic Pro" para
volver a conectarlo o puede conectarse automáticamente
Usando el micrófono MightyMic Pro
Para mejores resultados, use en un espacio abierto sin barreras entre el micrófono y el
teléfono. Las personas especialmente pueden causar interferencia.
Recomendamos encarecidamente que configure su teléfono en modo avión con Bluetooth
habilitado; de lo contrario, puede tener grabaciones interrumpidas por llamadas no deseadas
Para escuchar la reproducción de audio mientras el micrófono Bluetooth está emparejado,
conecte los auriculares al micrófono o apague Bluetooth para escuchar a través del teléfono.
Para dispositivos IOS, abra el Centro de control y seleccione el botón Airplay para elegir
manualmente la opción de reproducción deseada.
Pausa Presione el botón "MF" para pausar la música
Sube el volumen Mantenga presionado el botón "+" para aumentar el volumen
Bajar volumen Mantenga presionado el botón "-" para bajar el volumen
Siguiente pista Presione rápidamente el botón "+" para pasar a la siguiente pista
Pista anterior Presione rápidamente el botón "-" para pasar a la pista anterior
Funciones musicales
Usar la función de monitor
Muchas aplicaciones admiten monitoreo de audio durante la grabación. Conecte los auriculares al
conector de 3,5 mm del MightyMic Pro o al conector del monitor del micrófono para escuchar los
sonidos que devuelve la aplicación. Debido a las funciones de transmisión, habrá algún retraso en la
señal del monitor. Este retraso no ocurrirá en la grabación.
Manual del usuario de MightyMic Pro
9
Estado del LED Indicación LED
Encendido El LED azul parpadeará dos veces cuando esté conectado
Apagado El LED azul parpadeará una vez, luego el LED rojo
parpadeará una vez
Emparejamiento Los LED rojo y azul parpadearán alternativamente
Desconectado El LED azul parpadeará una vez por segundo.
Modo de espera El LED azul parpadeará dos veces cada 3 segundos.
Modo de espera conectado El LED azul permanecerá encendido continuamente
Modo de trabajo conectado El LED azul parpadeará una vez cada 5 segundos.
Conexión multipunto El LED azul permanecerá encendido continuamente. El LED
puede parpadear de manera diferente según el tipo de
teléfono
Batería baja El LED rojo parpadeará 3 veces rápidamente
Carga El LED rojo permanecerá encendido continuamente
Completamente cargado El LED rojo se apagará
Indicadores LED
Uso de MightyMic Pro para grabación de video
1) Conecte el micrófono Bluetooth antes de que se inicie la aplicación. Es posible que
deba seleccionar el micrófono Bluetooth como una opción en la configuración de la
aplicación
2) Con algunas aplicaciones, si el micrófono Bluetooth está conectado después de que la
aplicación se inicia, el micrófono Bluetooth se iniciará automáticamente y el símbolo
del micrófono puede volverse azul para indicar que un micrófono Bluetooth está activo
3) Si el micrófono Bluetooth se desconecta mientras la aplicación está activa, la
aplicación vuelve al micrófono incorporado.
4) Para confirmar que el micrófono está conectado, realice una grabación de prueba o
vaya a la sección Configuración. Al salir de la sección Configuración, el micrófono
Bluetooth normalmente se activará nuevamente.
5) Se necesita una aplicación de video como FilmicPro o MoviePro (IOS) o Cinema FV-5
(Android) para hacer la grabación de video Bluetooth. Visite nuestro sitio web para
obtener actualizaciones sobre esta u otras aplicaciones compatibles.
6) Es posible que escuche un retraso de audio mientras supervisa la grabación. Esto es
normal. Este retraso no ocurrirá en la grabación
Usando el MightyMic Pro para la grabación de audio
MightyMic Pro admitirá aplicaciones de audio diseñadas para funcionar con dispositivos
Bluetooth externos
Se necesita una aplicación de audio, como la aplicación de grabación MightyMic Pro (IOS)
para hacer la grabación de audio Bluetooth. Visite nuestro sitio web para obtener
actualizaciones sobre esta u otras aplicaciones compatibles.
Tabla de contenidos
Idiomas:
