AMP Lighting AlpinePro Path Light Instrucciones de funcionamiento y seguridad

- 1 -

AMP®LowVoltage Landscape Lighting

AMP® AlpinePro Path Light (Lamp - Ready)

APL-3014-B-BZ

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Package Contents

A. (1) Fixture Body

B. (1) Extension Pole

C. (1) Stake

Parts Required (sold separately)

A. (1) LED Lamp

Product Dimensions

24.5”

2.5”

4”

2”

- 2 - - 3 -

This xture is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes

and instructions may result in serious injury, property damage and void

the warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in

order to connect to the main low voltage cable.

5. Wiring connections must be made with wire UL Listed connectors that

are suitable for outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

AMP®AlpinePro Path Light (Lamp Ready)

APL-3014-B-BZ

INSTALLATION & MAINTENANCE GUIDE

Important Safety Instructions: Read Before Installation

www.amplighting.com [email protected] • 813.978.3900

Remove Faceplate

Install/Replace Lamp

Unscrew the faceplate, then remove

it from the xture body.

Insert the lamp with the correct

wattage and type marked on the

xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch lamp with

bare hands. Use soft cloth to handle

lamp.

NOTE: The “Wafer” Bi-Pin LED lamp

also can be used in this xture.

Fixture Body

Faceplate

Install Faceplate

Screw the Faceplate back onto the

xture body. Hand tighten until snug.

Faceplate

Fixture

Body

Socket

Lamp

- 4 - - 5 -

“Wafer” Bi-pin LED Lamp

www.amplighting.com [email protected] • 813.978.3900

AMP®AlpinePro Path Light (Lamp Ready)

APL-3014-B-BZ

INSTALLATION & MAINTENANCE GUIDE

- 6 -

Wire Connections

Pigtail

Main Supply Cable

Wire Connectors

- 7 -

Install Fixture to Stake

Fixture

Pigtail

Wireway Slot

Stake

Install Stake

Board

Stake

Soil

Ground

Clear away an area on the ground

at the wireway slot on top of

the stake. Lay the luminaire

pigtail into the wireway slot and

thread the xture onto the stake.

Tighten until snug using the lock

nut to secure it to the base.

Determine the desired location for

mounting the xture. Hammer the

stake into the ground until the ange

of the stake is ush to grade. To avoid

damage to the stake, place a board on

top of the stake while hammering.

NOTE: If the ground is hard and the

stake is difcult to install, make a

crosscut in the ground using a at

shovel.

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold seperately), connect the leads from the luminaire to the main

supply cable leads.

AMP®AlpinePro Path Light (Lamp Ready)

APL-3014-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com [email protected] • 813.978.3900

- 8 -

AMP®LowVoltage Landscape Lighting

AMP® AlpinePro Path Light (Lamp - Ready)

APL-3014-B-BZ

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Tabla de contenidos

Otros manuales de Iluminación de paisajes de AMP Lighting

AMP Lighting

AMP Lighting Estate PendantPro ASI-9006-4036-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting ADL Series Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting AviatorPro Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting PinnaclePro AAL-1017-4-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting EscherPro MR11 Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting APL-3031-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting APL-3011-4-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting HydraPro AWL-5006-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting AFL-4015-4-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting ASPL-3030-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting HydraPro AUL-8001-25-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting InfusePro AHS- 630X-4-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting BulletPro MR8 Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting APL-3012-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting G2 ControlPro Series Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting APL-3024-4-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting AAL-1012 Series Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting Slimline VAC-SLMTIMER1 Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting AHS-7004-4-B-BZ Instrucciones de funcionamiento y seguridad

AMP Lighting

AMP Lighting ASAL-1025-B-BZ Instrucciones de funcionamiento y seguridad

Manuales populares de Iluminación de paisajes de otras marcas

Intex

Intex SL1006 Manual de usuario

LED Group

LED Group ROBUS R2IN13W Manual de usuario

Patriot Lighting

Patriot Lighting 343-1484 Manual de usuario

Hess

Hess SERA G: SERA S Manual de usuario

LIGMAN

LIGMAN JET 44 Manual de usuario

LIGMAN

LIGMAN MALTA 1 Manual de usuario

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manual de usuario

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manual de usuario

Saxby Lighting

Saxby Lighting Islay 68784 Manual

LIGMAN

LIGMAN EU-10016-3 Manual de usuario

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manual de usuario

LIGMAN

LIGMAN KI-60475 Manual de usuario

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manual de usuario

Malibu Boats

Malibu Boats CL905K Manual de usuario

LIGMAN

LIGMAN NYB-30161 Manual de usuario

LIGMAN

LIGMAN SI-80021 Manual de usuario

Volt

Volt 2-in-1 Tiki-Brass Torch Light Manual de usuario

Malibu Boats

Malibu Boats CM110P Manual de usuario