AMI ATX-H310A Manual de usuario
Industrial Motherboard
ATX-H310A
ii
E16949
First Edition
July 2020
Copyright Notice
This document is copyrighted, 2020. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described
in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use,
or for any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to
change without notice. While reasonable efforts have been made in the preparation
of this document to assure its accuracy, the original manufacturer assumes no
liabilities resulting from errors or omissions in this document, or from the use of the
information contained herein.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
Acknowledgments
All other products’ name or trademarks are properties of their respective owners.
• AMI is a trademark of American Megatrends Inc.
• Intel®, Core™ are trademarks of Intel®Corporation.
• Microsoft Windows®is a registered trademark of Microsoft Corp.
• IBM, PC/AT, PS/2, and VGA are trademarks of International Business
Machines Corporation.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
All other product names or trademarks are properties of their respective owners.
iii
Contents
Chapter 1 Product overview
1.1 Package contents......................................................................... 1-1
1.2 Features ........................................................................................ 1-1
1.3 Specications............................................................................... 1-2
Chapter 2 Motherboard information
2.1 Before you proceed ..................................................................... 2-1
2.2 Motherboard layout...................................................................... 2-2
2.3 Screw size..................................................................................... 2-4
2.3.1 Component side.............................................................. 2-4
2.3.2 Solder side ...................................................................... 2-5
2.4 Central Processing Unit (CPU) ................................................... 2-6
2.4.1 Installing the CPU ........................................................... 2-7
2.4.2 CPU heatsink and fan assembly installation................... 2-8
2.5 System memory ......................................................................... 2-10
2.5.1 Installing a DIMM .......................................................... 2-10
2.6 Jumpers/Slots ............................................................................ 2-12
2.7 Connectors ................................................................................. 2-17
2.7.1 Rear panel connectors.................................................. 2-17
2.7.2 Internal connectors ....................................................... 2-19
Chapter 3 BIOS setup
3.1 BIOS setup program .................................................................... 3-1
3.1.1 BIOS menu screen.......................................................... 3-2
3.1.2 Menu bar......................................................................... 3-2
3.2 Main menu .................................................................................... 3-2
3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2
3.2.2 System Time [HH:MM:SS] .............................................. 3-2
3.3 Advanced menu ........................................................................... 3-3
3.3.1 CPUConguration .......................................................... 3-3
3.3.2 SATAConguration ........................................................ 3-3
3.3.3 USBConguration .......................................................... 3-4
3.3.4 Hardware Monitor ........................................................... 3-5
3.3.5 SIOConguration ......................................................... 3-11
3.3.6 PCH-FWConguration ................................................. 3-13
3.3.7 Power Management...................................................... 3-13
3.3.8 DigitalIOPortConguration ......................................... 3-14
iv
3.4 Chipset menu ............................................................................. 3-15
3.4.1 SystemAgent(SA)Conguration ................................. 3-15
3.4.2 PCH-IOConguration ................................................... 3-15
3.5 Security menu ............................................................................ 3-16
3.5.1 Administrator Password ................................................ 3-16
3.5.2 User Password.............................................................. 3-16
3.6 Boot menu .................................................................................. 3-17
3.6.1 BootConguration ........................................................ 3-17
3.6.2 FIXED BOOT ORDER Priorities .................................. 3-17
3.7 Save & Exit menu....................................................................... 3-18
Appendix A-1
Notices.......................................................................................................A-1
1-1
Chapter 1: Product overview
1.1 Package contents
Check your industrial motherboard package for the following items.
1 x Industrial Motherboard
1 x SATA Cable
1 x I/O Shield
1 x COM port cable
If any of the above items is damaged or missing, contact your distributor or
sales representative immediately.
1.2 Features
• Intel®8th / 9th Generation (Coffee Lake-S / Coffee Lake-S Refresh) Core™ i9/
i7/ i5/ i3, Pentium 14nm LGA 1151 socket Processor, TDP 6-Core 95W
• Two DDR4 (2666/2400/2133 MHz, max. 64GB,non-ECC, un-buffered memory
• SATAIII 6.0 Gb/s port x 3 supporting RAID 0/1/5/10, M.2 2280/2242 M-key
(PCIe x1 / SATA3) x 1
• PCIe 3.0 [x16] slot x 1, PCIe 2.0 [x4] slot x 2, PCI slot x 3
• HDMI™, DisplayPort and VGA support
Chapter 1
Product overview
ATX-H310A
1-2
1.3 Specications
SYSTEM
Form factor
ATX Form Factor, 12”x9.6” (305mmx244mm)
CPU
Intel®8th/9th Generation(Coffee Lake-S, Coffee Lake-S Refresh)
Core™ i9/ i7/ i5 /i3, Pentium 14nm LGA 1151 socket Processor
Memory
2 x DIMM, DDR4 (2666/2400/2133 MHz, max. 64GB) non-ECC,
un-buffered memory
Dual channel memory architecture
I/O Chipset
NCT6793D+ F81216HD
Ethernet
1 x Intel®PHY i219V Giga LAN
1 x Intel®i211AT Giga LAN
2 x RJ45 ports
BIOS
1 x 128Mbit Flash ROM, AMI BIOS
Wake on LAN/PXE
Yes (WOL / PXE)
Watchdog Timer
1~255 steps by software program
H/W Monitor
Temperature Monitor on CPU/Chassis
Voltage Monitor on Vcore/5V/3.3V/12V
Fan Monitor on CPU/Chassis
Smart Fan Control
CPU Fan / Chassis Fan x 2
Power State
S3, S4, S5
Expansion slot 1 x PCIe 3.0 [x16] Slot
2 x PCIe 2.0 [x4] Slots
3 x PCI slots
1 x M.2 2280/2242 M-key (PCIex1/SATA3)
1 x Mini PCIe Slot (optional, default: N/A)
1 x Micro SIM card Slot (optional, default: N/A)
TPM
Nuvoton NPCT750AABYX TPM2.0 onboard (optional)
Battery
Lithium battery
Power requirement
1 x 24-pin ATX connector
1 x 8-pin (2x4) ATX 12V Power connector
Board size
12”x9.6” (305mmx244mm)
Gross weight
1.76 lb (0.8 Kg)
Operating
temperature
32~131°F (0~55°C)
Storage temperature
-40°F ~185°F (-40°C ~85°C)
Operating humidity
0%~90% relative humidity, non-condensing
Power compliance
N/A
Certicate
CE/FCC Class A
(continued on the next page)
1-3
Chapter 1: Product overview
DISPLAY
Chipset
Intel®Graphics Media Accelerator
DisplayPort
Up to 4096 x 2160 @ 24 Hz / 3840 x 2160 @ 60 Hz, with Digital
Audio
HDMI™
Up to 4096 x 2160 @ 30 Hz
VGA
Up to 1920 x 1200 @ 60 Hz (via IT6516B)
Back I/O ports
Audio 3 x Audio Jack: Line-in, Mic-in, Line-out
Ethernet
2 x RJ-45 ports
USB 2 x USB 3.2 Gen 1 ports (5 Gbps)
4 x USB 2.0 ports
PS/2 N/A
Serial port 1 x RS-232/422/485 (COM1, supports 5V/12V/RI optional)
Display
1 x DisplayPort port
1 x VGA port
1 x HDMI™ port
Internal I/O connectors
Storage
3 x SATA III (6.0Gb/s) ports support RAID 0/1/5/10
1 x M.2 2280/2242 M-key (PCIex1 / SATA3)
Serial port
5 x RS-232 headers
USB 1 x USB 3.2 Gen 1 header supports additional 2 USB ports
1 x USB 2.0 Type A (vertical) port
Audio
1 x speaker header (Line-out)
1 x AAFP header
Fan
1 x CPU Fan header (4-pin)
2 x Chassis Fan headers (4-pin)
DIO
1 x 8-bit Digital I/O interface (In/Out programmable)
Others
1 x Chassis Intrusion header
1 x AT/ATX mode select jumper
1 x Front panel header
1 x Clear CMOS jumper
1 x 3-pin ME lock header
Others
OS Support Windows
®
10 64 bit
Linux Ubuntu 64 bit (18.04.3 / Kernal 5)
NOTE: Specicationsaresubjecttochangewithoutnotice.
ATX-H310A
1-4
2-1
Chapter 2: Motherboard information
Chapter 2
Motherboard information
2.1 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
CAUTION!
• Unplug the power cord from the wall socket before touching any
component.
• Before handling components, use a grounded wrist strap or touch a safely
grounded object or a metal object, such as the power supply case, to avoid
damaging them due to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
• Before you install or remove any component, ensure that the ATX power
supply is switched off or the power cord is detached from the power
supply. Failure to do so may cause severe damage to the motherboard,
peripherals, or components.
ATX-H310A
2-2
ATX-H310A
PCIEX16_1
22422280
M2_TYPE_M1
MINI_CARD1
AAFP
PCIEX4_1
PCIEX4_2
PCI1
SIM1
PCI2
PCI3
F_PANEL
DIS_ME CLRTC1
ATX_AT
CHASSIS
EATX_PWR1
CPU_FAN1
CHA_FAN1
CHA_FAN2
BATTERY1
Super
I/O
ALC
887
ASM
1442K
LGA1151
Intel®
H310
Intel®
i211AT
Intel®
PHY i219V
DDR4 DIMM_A1* (64bit, 288-pin module)
DDR4 DIMM_B1* (64bit, 288-pin module)
SATA6G_1
SATA6G_3
SATA6G_2
SPI_1
AUDIO
USB20_78
DP1
HDMI1
LAN2_USB3_56
LAN1_USB3_12
24.4cm(9.6in)
128Mb
BIOS
EATX_PWR2
USB20_9
COM6COM5
ASM
1083
COM4COM3
DIO COM2
AMP_CON1
LED_5VSB
LED_5V
M2_SSD_LED1
30.5cm(12in)
USB3_34
DEBUG
BZ1
VGA
COM1_V1
J3
J2
J4
J1
COM1
342 31 5 6
7
2
9
8
13 31415 10111219
20
1718 7 16
22
21
2.2 Motherboard layout
Place this side
towards the rear
of the chassis
NOTE: Place nine screws into the holes indicated by circles to secure the
motherboard to the chassis.
CAUTION! Do not overtighten the screws! Doing so can damage the
motherboard.
Tabla de contenidos
Otros manuales de Placa madre de AMI
AMI
AMI EMB-B75B Manual de usuario
AMI
AMI Mark IV Screamer Manual de usuario
AMI
AMI MI987 Manual de usuario
AMI
AMI MI890 Manual de usuario
AMI
AMI MB960 Manual de usuario
AMI
AMI Kit-CJE B75B Manual de usuario
AMI
AMI Ecast View B75B Manual de usuario
AMI
AMI M920 Series Manual de usuario
AMI
AMI MI956 Manual de usuario
AMI
AMI MI946F Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
