American Weigh Mini CD-300 Manual de usuario

User Manual

Mini CD-300 300 x 0.1g

Mini CD-50 50 x 0.01g

CD |Scale

Compact Digital Scale

mini

Mini CD|Scale User Manual

Thank you for purchasing the American Weigh CD Scale. Please

read all operating instructions carefully before use. This elec-

tronic scale is a precision instrument. With normal care proper

treatment, it will provide years of reliable service.

Never load the scale with more than the maximal capacity.

Overloading can permanently damage it! Avoid any exposure to

extreme heat or cold, your scale works better when operated at

normal room temperature. Always allow the scale to acclimate to

normal room temperature for at least 1 hour before use.

Give your scale sufcient warm up time - usually 30 seconds

to give the internal components a chance to stabilize before

calibration. Keep your scale in a clean environment. Dust, dirt,

moisture, vibration, air currents and a close distance to other

electronic equipment can all cause an adverse effect on the

reliability and accuracy of your scale. Handle with care. Gently

apply all items to be weighed onto the platform. Although this

scale is designed to be quite durable, try to avoid rough treat-

ment as this may permanently damage the internal sensor. Avoid

shaking, dropping or otherwise shocking the scale. This is a

precision instrument and must be handled with extreme care.

Only operate the scale on a stable, vibration free surface.

I. OPERATION:

1. Place scale on a horizontal at surface, press [I/O]

2. Wait until “0.0” is displayed.

3. Put the object(s) on the weighing platform.

4. Using the [M] key, you can switch between the weighing units.

II. TARE WEIGHING:

1. Turn on scale as described above.

2. Place the “tare item” on the platform.

3. Press [T] and wait until “0.0” is displayed.

4. Add the “net-weight-item”.

III. CALIBRATION

Only perform calibration if there is a problem.

1. Turn on the scale by pressing the [I/O] key.

2. Wait for the scale to go to zero rst, then press and hold the

[M] key until the display shows “CAL” then release it.

3. Press the [M] key again and the display will show “CAL” then

the required calibration weight will be displayed.

5. At this point, place the required calibration weight on the scale.

After a few seconds the display will show “PASS” then the weight

will display again.

6. Calibration is complete! You can now remove the weight and

turn off the scale.

V. TROUBLESHOOTING:

The primary reasons for inaccuracy or malfunction are low bat-

teries, incorrect calibration, overload or operating on an unstable

surface. Please keep this in mind and maintain and operate your

scale property. This scale is a precise instrument and must be

handed with the utmost care and caution.

Display Elimination of errors

Nothing, Battery-Symbol, [lo]

Change the batteries.

[OUT2] Recalibrate the scale as shown above.

[O-LD] You are overloading the scale, Remove

the excessive load immediately!

[O-LD] or [LLLLL] The delicate weighing load cells have

been damaged by misusing the scale

(i.e. it was shocked, dropped or

overloaded). You can try recalibrating

the scale. If the load cell has not been

damaged too much it will work again

after recalibration.

[UNST] Use the scale in a more stable position.

Specications

Model Mini CD-300 Mini CD-50

Capacity 300g

10.585oz

9.645ozt

193dwt

50g

1.764oz

250ct

771.5

Resolution 0.1g

0.005oz

0.005ozt

0.1dwt

0.01g

0.001oz

0.05ct

0.2gn

Display Backlit LCD

Calibration Weight 300g 50g

Platform Dimensions 2-5/8 x 2-1/16 inch

Scale Dimensions 3-3/8 x 2-7/8 x 7/16 inch

Power two (2) CR2032 Batteries

Gross Weight 81.2 g

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escala de American Weigh

American Weigh

American Weigh CD Series Manual de usuario

American Weigh

American Weigh Blade 150 Manual de usuario

American Weigh

American Weigh AMW-150M Manual de usuario

American Weigh

American Weigh AMW-250i Manual de usuario

American Weigh

American Weigh AMW-100 Manual de usuario

American Weigh

American Weigh AMW-440T Manual de usuario

American Weigh

American Weigh CD-V2-500 Manual de usuario

American Weigh

American Weigh CD-1000 Manual de usuario

American Weigh

American Weigh AMW-SCOOP Manual de usuario

American Weigh

American Weigh AMW-810 Manual de usuario

American Weigh

American Weigh DIA-10 Manual de usuario

American Weigh

American Weigh AMW-500 Manual de usuario

American Weigh

American Weigh AMW-50 Manual de usuario

American Weigh

American Weigh CD-Scale v2.0 Manual de usuario

American Weigh

American Weigh AMW-1000 Manual de usuario

American Weigh

American Weigh AMW-DISC-55 Manual de usuario

American Weigh

American Weigh AMW-822 Manual de usuario

American Weigh

American Weigh AMW-CDV2-500 Manual de usuario

American Weigh

American Weigh miniPRO-30 Manual de usuario

American Weigh

American Weigh AMW-850 Manual de usuario

American Weigh

American Weigh AMW-875 Manual de usuario

American Weigh

American Weigh AMW-Card Manual de usuario

American Weigh

American Weigh AMW-330 Manual de usuario

American Weigh

American Weigh AMW-13 Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario